Research publications, KPR Institute Engineering and Technology, Autonomous Engineering Institution, Coimbatore, India

International Admissions 2022 Open        New - ZESTA 2022 - Be Amazed!       
Accreditations NAAC UGC NIRF NBA NISP ARIIA SIRO ISO QS

Publications

At KPR Institute of Engineering and Technology

Publications

At KPR Institute of Engineering and Technology

Publication Details (as on January-2022)






Expand all sections

    2022

  1. Pathak, Pawan Kumar, Anil Kumar Yadav, Sanjeevikumar Padmanaban, P. A. Alvi, and Innocent Kamwa. "Fuel cell‐based topologies and multi‐input DC–DC power converters for hybrid electric vehicles: A comprehensive review." IET Generation, Transmission & Distribution (2022). https://doi.org/10.1049/gtd2.12439.
  2. Prabhu, S., T. Daniel Thangadurai, P. Vijai Bharathy, and Pon Kalugasalam. "Investigation on the Photocatalytic and Antibacterial Activities of Green synthesized Cupric Oxide Nanoparticles using Clitoria ternatea." Iranian Journal of Catalysis 12, no. 1 (2022): 1-11.
  3. Ramadan, Haitham S., Sanjeevikumar Padmanaban, and Mohamed I. Mosaad. "Metaheuristic-based Near-Optimal Fractional Order PI Controller for On-grid Fuel Cell Dynamic Performance Enhancement." Electric Power Systems Research 208 (2022): 107897. https://doi.org/10.1016/j.epsr.2022.107897
  4. Nasab, Morteza Azimi, Mohammad Zand, Sanjeevikumar Padmanaban, Mahajan Sagar Bhaskar, and Josep M. Guerrero. "An efficient, robust optimization model for the unit commitment considering renewable uncertainty and pumped-storage hydropower." Computers and Electrical Engineering V.no.100 (2022). https://doi.org/10.1016/j.compeleceng.2022.107846.
  5. Thakur, Amrit Kumar, Ravishankar Sathyamurthy, R. Velraj, R. Saidur, Iseult Lynch, Meenakshi Chaturvedi, and Swellam W. Sharshir. "Synergetic effect of absorber and condenser nano-coating on evaporation and thermal performance of solar distillation unit for clean water production." Solar Energy Materials and Solar Cells 240 (2022): 111698.
  6. Amrit Kumar Thakur, Ravishankar Sathyamurthy, R. Velraj, and Iseult Lynch. "Development of a novel cellulose foam augmented with candle-soot derived carbon nanoparticles for solar-powered desalination of brackish water." Environmental Science: Nano (2022). https://doi.org/10.1016/j.solmat.2022.111698
  7. Prasad, Arani Rajendra, Muthu Manokar Athikesavan, Abd Elnaby Kabeel, Manegalai Govindan Sumithra, Ravishankar Sathyamurthy, and Amrit Kumar Thakur. "Analysis of a solar still with photovoltaic modules and electrical heater-Energy and exergy approach." Environmental Science and Pollution Research (2022): 1-13. https://doi.org/10.1007/s11356-022-19674-1.
  8. Thangadurai, T. Daniel, N. Manjubaashini, D. Nataraj, Vincent Gomes, and Yong Ill Lee. "A review on graphene quantum dots, an emerging luminescent carbon nanolights: Healthcare and Environmental applications." Materials Science and Engineering: B 278 (2022). https://doi.org/10.1016/j.mseb.2022.115633.
  9. Natarajan, Rajamurugu, Venkatesan Jayaraman, and Ravishankar Sathyamurthy. "Comparative studies on performance of solar towers with variable scale ratios." Environmental Science and Pollution Research (2022): 1-11. https://doi.org/10.1007/s11356-022-19079-0.
  10. Attia, Mohammed & Manokar, A. & Kaliyamoorthy, Murugan & Balachandran, Guruprasad & Kutbudeen, Syed & Ravishankar Sathyamurthy. “Performance Improvements of Hemispherical Solar Still Using Internal Reflector: Energy and Exergy Analysis”. Environmental Science and Pollution Research (2022). https://doi.org/10.1007/s11356-021-17973-7.
  11. Nivaashini, M., P. Thangaraj, S. Sountharrajan, E. Suganya, and R. Soundariya. "Effective Feature Selection for Hybrid Wireless IoT Network Intrusion Detection Systems Using Machine Learning Techniques." Ad Hoc & Sensor Wireless Networks 49, no. 3-4 (2021): 175-206.

    12. 2021

  12. Priya, A. K., R. Suresh, P. Senthil Kumar, Saravanan Rajendran, Dai-Viet N. Vo, and Matias Soto-Moscoso. "A review on recent advancements in photocatalytic remediation for harmful inorganic and organic gases." Chemosphere (2021): 131344.
  13. Devarajan, Balaji, R. Saravanakumar, S. Sivalingam, V. Bhuvaneswari, Fatemeh Karimi, and L. Rajeshkumar. "Catalyst derived from wastes for biofuel production: a critical review and patent landscape analysis." Applied Nanoscience (2021): 1-25.
  14. Ramesh, Mari, Krishnaswamy Marimuthu, Palanisamy Karuppuswamy, and LakshmiNarasimhan Rajeshkumar. "Microstructure and properties of YSZ-Al2O3 functional ceramic thermal barrier coatings for military applications." Boletín de la Sociedad Española de Cerámica y Vidrio (2021).
  15. Ramesh, M., L. Rajeshkumar, and R. Bhoopathi. "Carbon substrates: a review on fabrication, properties and applications." Carbon Letters (2021): 1-24.
  16. Mahendran, R., P. Rajkumar, L. Nirmal Raj, S. Karthikeyan, and L. Rajeshkumar. "Effect of deep cryogenic treatment on tool life of multilayer coated carbide inserts by shoulder milling of EN8 steel." Journal of the Brazilian Society of Mechanical Sciences and Engineering 43, no. 8 (2021): 1-11.
  17. Tamizharasan, D., and K. Karthikeyan. "Controllability results for fractional integrodifferential systems with boundary conditions." Indian Journal of Pure and Applied Mathematics 52, no. 1 (2021): 39-45.
  18. Navamani, K. "Continuum time-delayed electron hopping in the extended dynamical molecules and entropy-ruled Einstein relation for organic semiconductors." Journal of Physics Communications 5, no. 7 (2021): 075012.
  19. Rufuss, D. Dsilva Winfred, S. Arulvel, V. Anil Kumar, P. A. Davies, T. Arunkumar, Ravishankar Sathyamurthy, A. E. Kabeel et al. "Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination." Renewable Energy 181 (2022): 219-234.
  20. Yoganandam, K., Vigneshwaran Shanmugam, A. Vasudevan, D. Vinodh, N. Nagaprasad, Balasubramaniam Stalin, Alagar Karthick, Chandrabhanu Malla, and Murugesan Bharani. "Investigation of dynamic, mechanical, and thermal properties of Calotropis procera particle-reinforced PLA biocomposites." Advances in Materials Science and Engineering 2021 (2021).
  21. Thangaraj, Rajasekaran, S. Anandamurugan, P. Pandiyan, and Vishnu Kumar Kaliappan. "Artificial intelligence in tomato leaf disease detection: a comprehensive review and discussion." Journal of Plant Diseases and Protection (2021): 1-20.
  22. Ali, Bagh, Suriya Uma Devi Sathyanarayanan, Ahmed Kadhim Hussein, Sajjad Hussain, and Rizwan Ali Naqvi. "Transient rotating nanofluid flow over a Riga plate with gyrotactic micro-organisms, binary chemical reaction and non-Fourier heat flux." Chinese Journal of Physics 73 (2021): 732-745.
  23. Shahzad, Faisal, Wasim Jamshed, Suriya Uma Devi Sathyanarayanan, Abederrahmane Aissa, Prakash Madheshwaran, and Abed Mourad. "Thermal analysis on Darcy‐Forchheimer swirling Casson hybrid nanofluid flow inside parallel plates in parabolic trough solar collector: An application to solar aircraft." International Journal of Energy Research (2021).
  24. Boutiara, Abdelatif, Sina Etemad, Jehad Alzabut, Azhar Hussain, Muthaiah Subramanian, and Shahram Rezapour. "On a nonlinear sequential four-point fractional q-difference equation involving q-integral operators in boundary conditions along with stability criteria." Advances in Difference Equations 2021, no. 1 (2021): 1-23.
  25. Tamizharasan, D., and K. Karthikeyan. "Controllability of nonlocal impulsive differential equations with measure of noncompactness." In Journal of Physics: Conference Series, vol. 1850, no. 1, p. 012109. IOP Publishing, 2021.
  26. Panbude, Anshu, Suhasini Sathiyamoorthy, R. Kumar, H. Shankar, S. Paulraj, V. Kathirvel, A. M. Adam, E. M. M. Ibrahim, K. Jayabal, and Pandiyarasan Veluswamy. "Incorporation of polyaniline on graphene-related materials for wearable thermoelectric applications." Materials Letters 304 (2021): 130576.
  27. Suganyadevi, S., V. Seethalakshmi, and K. Balasamy. "A review on deep learning in medical image analysis." International Journal of Multimedia Information Retrieval (2021): 1-20.
  28. Arun Kumar, S., P. Suresh Mohan Kumar, Ravishankar Sathyamurthy, and A. Muthu Manokar. "A comparative analysis of the role of carbon dioxide in multi-slope solar stills." International Journal of Ambient Energy (2021): 1-10.
  29. Nanthini, S., M. Shalini, Suhasini Sathiyamoorthy, R. Kumar, Hiroya Ikeda, H. Shankar, Malik Maaza, and Pandiyarasan Veluswamy. "Preparation and Characterization of Polyethylenimine Functionalized Reduced Graphene Oxide for Thermoelectric Applications." ECS Journal of Solid State Science and Technology 10, no. 8 (2021): 081014.
  30. Abd Elnaby Kabeel, Paul Durai Leon Dharmadurai, Sathiyaseelan Vasanthaseelan, Ravishankar Sathyamurthy, Bharathwaaj Ramani, Athikesavan Muthu Manokar and Ali Chamkha, “Experimental studies on natural convection open and closed solar drying using external reflector.” Environmental Science and Pollution Research (2021)
  31. Pannerselvam, Anandhraj, Mohana Sundaram Kuppusamy, Jayaraman Shanmugapriyan, Vishnu Kumar Kaliappan, and Ravishankar Sathyamurthy. "Experimental Investigation of Removal of Flue Gas Emissions Exhaust from Municipal Solid Waste Incinerator using Photo-Voltaic based Electrostatic Precipitator." (2021).
  32. GaneshKumar, Poongavanam, Duraiswamy Sakthivadivel, Rajendran Prabakaran, Shanmugarajan Vigneswaran, Manivannan SakthiPriya, Amrit Kumar Thakur, Ravishankar Sathyamurthy, and Sung Chul Kim. "Exploring the thermo-physical characteristic of novel multi-wall carbon nanotube—Therminol-55-based nanofluids for solar-thermal applications." Environmental Science and Pollution Research (2021): 1-12.
  33. Kumar, Poongavanam Ganesh, Shunmugharajan Vigneswaran, Megaraj Meikandan, Duraisamy Sakthivadivel, Mohammad Salman, Amrit Kumar Thakur, Ravishankar Sathyamurthy, and Sung Chul Kim. "Exploring the photo-thermal conversion behavior and extinction coefficient of activated carbon nanofluids for direct absorption solar collector applications." Environmental Science and Pollution Research (2021): 1-13.
  34. Bhuvaneswari, V., L. Rajeshkumar, and K. Nimel Sworna Ross. "Influence of bioceramic reinforcement on tribological behaviour of aluminium alloy metal matrix composites: Experimental study and analysis." Journal of Materials Research and Technology (2021).
  35. Rafeek, Mohamed Thalib Mohamed, Vimala Muthu, Muthu Manokar Athikesavan, Ravishankar Sathyamurthy, and Abd Elnaby Kabeel. "Experimental investigation of an active inclined solar panel absorber solar still—energy and exergy analysis." Environmental Science and Pollution Research (2021): 1-14.
  36. Dhanapal, Balaji, Ravishankar Sathyamurthy, Abd Elnaby Kabeel, and Amrit Kumar Thakur. "Optimization of thermal efficiency on solar parabolic collectors using phase change materials—experimental and numerical study." Environmental Science and Pollution Research (2021): 1-14.
  37. Elsheikh, Ammar H., T. Muthuramalingam, S. Shanmugan, Ahmed Mohamed Mahmoud Ibrahim, B. Ramesh, Ahmed B. Khoshaim, Essam B. Moustafa, Badr Bedairi, Hitesh Punchal, and Ravishankar Sathyamurthy. "Fine-tuned artificial intelligence model using pigeon optimizer for prediction of residual stresses during turning of Inconel 718." Journal of Materials Research and Technology (2021).
  38. Thakur, Amrit Kumar, Ravishankar Sathyamurthy, R. Velraj, R. Saidur, and Jang-Yeon Hwang. "Augmented performance of solar desalination unit by utilization of nano-silicon coated glass cover for promoting drop-wise condensation." Desalination 515 (2021): 115191.
  39. Thakur, Amrit Kumar, Ravishankar Sathyamurthy, R. Velraj, I. Lynch, R. Saidur, A. K. Pandey, Swellam W. Sharshir, Zhenjun Ma, P. GaneshKumar, and A. E. Kabeel. "Sea-water desalination using a desalting unit integrated with a parabolic trough collector and activated carbon pellets as energy storage medium." Desalination 516 (2021): 115217.
  40. Rufuss, D. Dsilva Winfred, S. Arulvel, V. Anil Kumar, P. A. Davies, T. Arunkumar, Ravishankar Sathyamurthy, A. E. Kabeel et al. "Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination." Renewable Energy 181 (2022): 219-234.
  41. Senthilkumar, C., K. Gayathri Devi, K. S. Tamilselvan, and Rajeshwari Hegde. "ANN based Detection and Diagnosis of Neurological Disorder Diseases." Design Engineering (2021): 1111-1119.
  42. Sugavanam, K. R., K. Mohana Sundaram, R. Jeyabharath, and P. Veena. "Convolutional Neural Network-based harmonic mitigation technique for an adaptive shunt active power filter." Automatika 62, no. 3-4 (2021): 471-485.
  43. K. Mohana Sundaram, P. Prakash, D. Karthikeyan, Wubishet Degife Mammo. “Improved Carbon Nanotube Field Effect Transistor for Designing a Hearing Aid Filtering Application.” Journal of nanomaterials 2021
  44. Ramesh, M., L. Rajeshkumar, and V. Bhuvaneswari. "Leaf fibres as reinforcements in green composites: a review on processing, properties and applications." Emergent Materials (2021): 1-25.
  45. Boopathi, C. S., A. Pandian, Kalyan Sagar Kadali, Ravishankar Sathyamurthy, P. Anandhraj, and B. Madhu. "Predator–Prey based firefly optimization for PV Module parameters extraction." Energy Reports 7 (2021): 609-615.
  46. Geetha, A., J. Santhakumar, K. Mohana Sundaram, S. Usha, TM Thamizh Thentral, C. S. Boopathi, R. Ramya, and Ravishankar Sathyamurthy. "Prediction of hourly solar radiation in Tamil Nadu using ANN model with different learning algorithms." Energy Reports 8 (2022): 664-671.
  47. Saravanakumar, A., P. Sreenivas, and L. Rajeshkumar. "Optimization of drilling process parameters for self-lubricants reinforced aluminium metal matrix composites." Materials Today: Proceedings (2021).
  48. SundaramK, Mohana, P. Prakash, S. Angalaeswari, T. Deepa, L. Natrayan, and Prabhu Paramasivam. "Influence of Process Parameter on Carbon Nanotube Field Effect Transistor Using Response Surface Methodology." Journal of Nanomaterials 2021 (2021).
  49. M. Ramesh, L. Rajeshkumar & V. Bhuvaneswari, “Leaf based natural fibers as reinforcements in polymer composites - A review of preparation, properties and applications.” Emergent Materials (2021).
  50. Ashok Vajravelu, K S Tamilselvan, “Efficient channel selection algorithm for key feature extraction from EEG signals.” Oeconomia Copernicana
  51. Vasanthaseelan, S., E. Joel, A. E. Kabeel, R. Bharathwaaj, Ravishankar Sathyamurthy, and B. Madhu. "Multi-intractable analysis for alternative Diesel–Ethanol–Canola methyl ester ternary blend." Energy Reports 8 (2022): 455-462.
  52. Elsheikh, Ammar H., S. Shanmugan, Ravishankar Sathyamurthy, Amrit Kumar Thakur, Mohamed Issa, Hitesh Panchal, T. Muthuramalingam, Ravinder Kumar, and Mohsen Sharifpur. "Low-cost bilayered structure for improving the performance of solar stills: Performance/cost analysis and water yield prediction using machine learning." Sustainable Energy Technologies and Assessments 49 (2022): 101783.
  53. Senthilkumar, R., M. P. Natarajan, S. Ponnuvel, and Ravishankar Sathyamurthy. "Mechanical and Visco elastic analysis of sal tree gum incorporated epoxy BIO composite." Journal of Materials Research and Technology (2021).
  54. Thakur, Amrit Kumar, Ravishankar Sathyamurthy, R. Saidur, A. K. Pandey, Swellam W. Sharshir, and S. Christopher. "A Critical Review of Recent Development in Li-Ion Battery Cooling Using Advance Phase Change Materials." ECS Transactions 105, no. 1 (2021): 411.
  55. Thakur, Amrit Kumar, Mohammad Shamsuddin Ahmed, Jimin Park, Rajendran Prabakaran, Shaji Sidney, Ravishankar Sathyamurthy, Sung Chul Kim, Somasundaram Periasamy, Jaekook Kim, and Jang‐Yeon Hwang. "A review on carbon nanomaterials for K‐ion battery anode: Progress and perspectives." International Journal of Energy Research (2021).
  56. Prabhu, S., T. Daniel Thangadurai, P. Vijai Bharathy, and P. Kalugasalam. "Synthesis and Characterization of Nickel oxide Nanoparticles using Clitoria ternatea flower extract: Photocatalytic dye degradation under sunlight and Antibacterial Activity Applications." Results in Chemistry (2022): 100285.
  57. Mandlimath, Triveni Rajashekhar, Daneshwaran Balaji, and Sathasivam Pratheep Kumar. "Synthesis, structural and thermal expansion investigation of La, Ce and Eu substituted Bi4 (SiO4) 3." Materials Chemistry and Physics (2021): 124841.
  58. Balaji, Daneshwaran, and Sathasivam Pratheep Kumar. "Langbeinite phosphosilicates K2-xCsxZr2P2SiO12 (x= 0, 0.5, 1.0, 1.5, 2.0) for cesium encapsulation; synthesis, chemical durability and thermal expansion study." Ceramics International 47, no. 20 (2021): 28951-28959.
  59. Mandlimath, Triveni Rajashekhar, and Sathasivam Pratheep Kumar. "Effect of Synthetic Routes on the Catalytic Activity of FePO4 for p-Nitrophenol Reduction." Kinetics and Catalysis 62, no. 4 (2021): 536-544.
  60. R K Dharman, Bibi Mary Francis, Joice Sophia Ponraj, Santhoshbalaji, Rajesh Kumar Manavalan, H Shankar, Selvakumar Balasubramanian, Sathish Chander Dhanabalan, “Realization of Ti MOF/MoS2 Hybrid Nanostructure and their Catalytic Activity towards 4-Nitrophenol Reduction.” Journal of Materials Research and Technology
  61. Navamani, K. "Revisiting Einstein's diffusion-mobility relation for universal quantum materials: A generalized paradigm." EPL (Europhysics Letters) 134, no. 4 (2021): 47001.
  62. Kumari, P., and P. Thangaraj. "Optimized delbpa algorithm for binary pattern biometric key authentication in cloud data production" Dynamic Systems and Applications 30, no. 10 (2021): 1545-1560.

    2022

  1. Kim, Bubryur, Dong-Eun Lee, Gang Hu, Yuvaraj Natarajan, Sri Preethaa, and Arun P. Rathinakumar. 2022. "Ensemble Machine Learning-Based Approach for Predicting of FRP–Concrete Interfacial Bonding" Mathematics 10, no. 2:231(2022). https://doi.org/10.3390/math10020231.
  2. Bubryur Kim , Dong-Eun Lee , Gang Hu , Yuvaraj Natarajan , Sri Preethaa , Arun Pandian Rathinakumar , “Ensemble Machine Learning-Based Approach for Predicting of FRP–Concrete Interfacial Bonding ”: Mathematics, 10(231), (2022)

    3. 2021

  3. G. Jenifa, N. Yuvaraj, B Karthikeyan and K R Sri Preethaa, “Deep Learning based Voice Assistance in hospitals using Face Recognition”, Journal of Physics, Conference Series, ICCCEBS 2021, 1916, (2021), 012159, pp. 1- 6. doi:10.1088/1742-6596/1916/1/012159.
  4. K. R. Sri Preethaa, N. Yuvaraj, G. Jenifa , R. Indhu, P. Kanmani, “Lichen Element Based Autonomous Air Pollution Monitoring Around Smart Cities –A Deep Learning Approach”, Turkish Journal of Computer and Mathematics Education, 12(10), (2021), pp. 151-161. https://doi.org/10.17762/turcomat.v12i10.4063
  5. N Yuvaraj, M Sanjeev, , G Jenifa and K R Sri Preethaa, “Voice Activated Face Recognition based Smart Support System”, Journal of Physics, Conference Series, 2021, 1916 (2021), 012159, pp. 1-8. doi:10.1088/1742-6596/1916/1/012158
  6. GitanjaliWadhwa, A. Kaur “Various Image Modalities Used in Computer-Aided Diagnosis System for Detection of Breast Cancer Using Machine Learning Techniques: A Systematic Review”, Soft Computing and Signal Processing. Advances in Intelligent Systems and Computing, volume No: 1340 .281 -292, (2021). https://doi.org/10.1007/978-981-16-1249-7_27
  7. S. Sankar Ganesh, Saleh Abdullah Aloyuni “Deep Transfer Learning Based Unified Framework for COVID19 Classification and Infection Detection from Chest X‑Ray Images” ,Arabian Journal for Science and Engineering. https://doi: 10.1007/s13369-021-05958-0
  8. Bubryur Kim, N. Yuvaraj, Hee Won Park, R.Arun Pandian “Investigation of steel frame damage based on computer vision and deep learning” Automation in Construction, 132, 103941. https://doi.org/10.1016/j.autcon.2021.103941
  9. MansiMathur, Vikas Jindal, GitanjaliWadhwa, “Detection of The Multi-Scale Images Using SRP Network- A Review” 2021 Third International Conference on Inventive Research in Computing Applications (ICIRCA), pp. 1578-1583. https://doi.org/10.1109/ICIRCA51532.2021.9544921
  10. JenifaGnanamanickam, YuvarajNatarajan, Sri Preethaa K. R, “A Hybrid Speech Enhancement Algorithm for Voice Assistance Application”, Sensors, 21, 7025. https://doi.org/10.3390/s21217025.
  11. Yuvaraj Natarajan, Bubryur Kim, Dong-Eun Lee, Gang Hu, K.C.S. Kwok, “Predicting wind flow around buildings using deep learning”, Journal of Wind Engineering & Industrial Aerodynamics, 219, 104820. https://doi.org/10.1016/j.jweia.2021.104820.
  12. S. Sankar Ganesh, G. Kannayeram, AlagarKarthick, M. Muhibbullah, “A Novel Context Aware Joint Segmentation and Classification Framework for Glaucoma Detection”, Computational and Mathematical Methods in Medicine, 2921737, 2021. https://doi.org/10.1155/2021/2921737.
  13. Bubryur Kim, N. Yuvaraj, T. Tse , Dong-Eun Lee, Gang Hu, “Pressure pattern recognition in buildings using an unsupervised machine-learning algorithm”,Journal of Wind Engineering & Industrial Aerodynamics, 214(104629), (2021). https://doi.org/10.1016/j.jweia.2021.104629.
  14. Kim, B, Yuvaraj, N, Sri Preethaa, K.R.; Hu, G.; Lee, D.-E. Wind-Induced Pressure Prediction on Tall Buildings Using Generative Adversarial Imputation Network, Sensors, 21(2515), (2021). https://doi.org/10.3390/s21072515
  15. Bubryur Kim , N. Yuvaraj, K. R. Sri Preetha and R. Arun Pandian, "Surface crack detection using deep learning with shallow CNN architecture for enhanced computation", Neural Computing and Applications, 2021, https://doi.org/10.1007/s00521-021-05690-8
  16. Dr.N.Yuvaraj, Kanmani V, Sudhakar S, Sriram V Inaccuracy Correction Method For Moving Shapes And Shadows In Video Coding Object", International Journal Of Scientific & Technology Research, 9(3), (2020).
  17. K.R. Sri Preethaa, N. Yuvaraj and G. Jenifa , Ensemble Machine Learning Approach for Diabetes Prediction, Advances in Computing, Communication, Automation and Biomedical Technology, 1(1), (2021), pp 482-486.
  18. G. Jenifa, N. Yuvaraj and K.R. Sri Preethaa , Visitor/Intruder Monitoring System using Haar-cascade Classifier Algorithm, Advances in Computing, Communication, Automation and Biomedical Technology, 1(1), (2021), pp 229-231.
  19. G. Jenifa, S. Indu, C. Jeevitha and V. Kiruthika., Visitor/Intruder Monitoring System using Machine Learning, Wiley Scrivener, (2021), pp. 295-304.
  20. Wadhwa, Gitanjali, N. Jayanthi, M. Muthu Jayanthi, M. Nandhini, and G. Priyadharssini. "Depiction and Evolution of Intelligent Monitoring System for Garbage Using Internet of things." Annals of the Romanian Society for Cell Biology (2021), pp. 7380-7386.
  21. Wadhwa, Gitanjali, N. Jayanthi, and Mansi Mathur. "A Deep Convolutional Neural Network Approach for Detecting Malignancy of Ovarian Cancer Using Densenet Model." Annals of the Romanian Society for Cell Biology (2021), pp. 4449-4458.
  22. N. Jayanthi, and Gitanjali Wadhwa "COVID-19 Future Forecasting using Supervised Machine Learning Models." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12(9), (2021), pp. 1717-1722.
  23. Jayanthi, N., and Gitanjali Wadhwa, "Classification of Breast Cancer Detection Using K-Nearest Neighbor Algorithm Trained with Wisconsin Dataset." Annals of the Romanian Society for Cell Biology, (2021), pp. 4440-4448.

    24. 2020

  24. N.Yuvaraj, Bubryur Kim, K. R. Sri Preethaa "Transfer Learning based Real -Time Crack Detection Using Unmanned Arial System" International Journal of High -Rise Buildings, 9(4), (2020) pp. 351-360. https://doi.org/10.21022/IJHRB.2020.9.4.351
  25. Dr. N. Yuvaraj ,K. R. Sri Preethaa , R. Santhosh, A. Sabari, “Enhanced pedestrian detection using optimized deep convolution neural network for smart building surveillance”, Soft Computing, 24, (2020), pp. 17081–17092. https://doi.org/10.1007/s00500-020-04999-1
  26. K. R. Sri Preethaa, A. Sabari, " Intelligent video analysis for enhanced pedestrian detection by hybrid metaheuristic approach" Methodologies and Application, Soft Comput 24, No 16, (2020), pp. 12303–1231, 2020. DOI 10.1007/s00500-020-04674-5
  27. Sri Preethaa K R, Dinesh S, Danashanmuganathan and Dinesh K., "Real world anamoly object detection from survelliance video using Tensorflow Object Detection API", Studia Rosenthaliana (Journal for the Study of Research),12(6), (2020), pp. 54-62.
  28. K. R. Sri Preethaa, A Sabari , Deep learning models, architectures and libraries for implementing pedestrian detection, International journal of advanced research in science, engineering and technology. 7(1), (2020), pp. 12529-12537.
  29. Dr.N.Yuvaraj, Kanmani V, Sudhakar S, Sriram V, “Inaccuracy Correction Method For Moving Shapes And Shadows In Video Coding Object", International Journal Of Scientific & Technology Research, 9(3), (2020), pp. 4561-4566.
  30. Wadhwa, Gitanjali, and Mansi Mathur. "A Convolutional Neural Network Approach for The Diagnosis of Breast Cancer." In 2020 Sixth International Conference on Parallel, Distributed and Grid Computing (PDGC), (2020), pp. 357-361.
  31. Wadhwa, Gitanjali, and Mansi Mathur. "Detection of Ovarian Tumor Using Machine Learning Approaches: A Review." Innovation in Information and Communication Technology, (2020), pp. 471-476.
  32. Mathur, Mansi, Vikas Jindal, and Gitanjali Wadhwa. "Detecting Malignancy of Ovarian Tumour using Convolutional Neural Network: A Review." In 2020 Sixth International Conference on Parallel, Distributed and Grid Computing (PDGC), (2020), pp. 351-356. IEEE, 2020.
  33. S. Srithar, T. Maheswaran, Gitanjali Wadhwa. " An Iot Based Engineering Solution For Covid’19 Community Spread Using Machine Learning Approach" International Journal of Future Generation Communication and Networking Vol. 13, No. 4 , (2020).

    34. 2019

  34. Yuvaraj, Park Heewon and Kim Bubryur, “Statistical Analysis of Aerodynamic Characteristics on Buildings”, Journal of Korean Association of Spatial Structures, 19(4), (2019).
  35. Yuvaraj, N., Sri Preethaa, K.R. “Diabetes prediction in healthcare systems using machine learning algorithms on Hadoop cluster”, Cluster Computing, 22, (2019), pp. 1–9. https://doi.org/10.1007/s10586-017-1532-x
  36. Sri Preethaa K R, Faraaz Ahmad Khan, “A Survеy on Objеct Rеcognition using Dееp Lеаrning”, International Research Journal of Engineering and Technology, 6(3), (2019), pp. 44-48.
  37. Sri Preethaa .K.R, Jaswanth .R, Dhanush Kumar .K, Keshore .S.M, “An Overview of the Security of Blockchain, International Research Journal of Engineering and Technology, 6(2), (2019), pp 153-157.
  38. Yuvaraj N , Navin R T, ‘Identification of Phishing Website using Deep Learning Algorithm’, International Research Journal of Engineering and Technology, 6(1), (2019), pp. 289 -294.
  39. N. Yuvaraj, P. Kanaga Priya, “Survey on Deep Learning Based IoT Approach for Precision Crop Suggestion, International Journal for Research in Applied Science & Engineering Technology, Vol. 7, No. II, (2019), pp. 389- 395.
  40. Dr. N. Yuvaraj , P. Kanaga Priya, “An IoT Based Gradient Descent Approach for Precision Crop Suggestion using MLP”, Journal of Physics, 1362(012038), (2019), DOI:10.1088/1742-6596/1362/1/012038.
  41. Dr.N. Yuvaraj , R Sivaranjani A, “Artificial Intelligence Model for Earlier Prediction of Cardiac Functionalities Using Multilayer Perceptron”, Journal of Physics, 1362(012062), (2019). DOI:10.1088/1742-6596/1362/1/012062
  42. Yuvaraj N & Sivaranjani 2019 (Accepted), ‘Earlier Prediction of Cardiovascular Disease Using IoT and deep learning approaches’, Advances in Computerized Analysis in Clinical and Medical Imaging - Elsevier, Chapter no. 12, pages.14, (2019). eBook ISBN : 9780429446030, https://doi.org/10.1201/9780429446030
  43. Dr. N. Yuvaraj,M. Balaji A, “Intelligent Chatbot Model to Enhance the Emotion Detection in social media using Bi-directional Recurrent Neural Network”, Journal of Physics, Vol. 1362(012039), (2019). DOI:10.1088/1742-6596/1362/1/012039
  44. Yuvaraj N , MeeraMadhu , et.al,, ‘Enhancing the accuracy of digit recognition using machine learning algorithms’, International Journal of Advance Research, Ideas and Innovations in Technology, 5(1), (2019), pp. 289 -294. ISSN (online): 2454-132X.
  45. Yuvaraj N & Kanagapriya P , ‘A Survey on Deep Learning Based IoT Approach for Precision Crop Suggestion’, International Journal for Research in Applied Science & Engineering Technology, 7(11), (2019), pp. 389-395. ISSN (online): 2321-9653.
  46. Kaviya S. Divya Lakshmi R and Jenifa G, “Ensure the securities in IoT for home monitoring system”, International Journal of Advance Research, Ideas and Innovations in Technology, 5(1), (2019), pp. 330 – 332.
  47. Infanta Josephine A, Jenifa, Keerthana, Mounika, “Providing data integrity in toll booth management system”, International Journal of Advance Research, Ideas and Innovations in Technology, 5(1), (2019), pp. 330 – 332.

    48. 2018

  48. Yuvaraj N and Janani M , ‘Social Interaction and Stress-Based Recommendations for Elderly Healthcare Support System - A Survey’, Advances in Big Data and Cloud Computing - Springer, (SCI) 1(1),(2018), pp. 291-303, 2018.
  49. Yuvaraj N and Kanagapriya P, ‘A Survey on Sensors & Communication Technology in IoT for Smart Crop Cultivation using Machine Learning Algorithms’, International Journal for Scientific Research & Development, 6(1), (2018), pp. 2020 -2024,. ISSN (online): 2321-0613.
  50. Yuvaraj N & NaveenKumar M, ‘Improving the Quality of Service in a Wireless Sensor Network Technologies – A Survey’, - International Journal for Scientific Research & Development| 6(1), (2018), pp. 1851 – 1856.
  51. Yuvaraj N and Sivaranjani R, ‘Healthcare Access: A Survey on IoT and Machine Learning Algorithms for Effective Heart Rate Detection’, International Journal for Scientific Research & Development, 6(1), (2018), pp. 2042 -2045. ISSN (online): 2321-0613.
  52. Yuvaraj N and Sri Sindhuja Selvanayaki P, ‘An Extensive Survey on IoT Architecture and Machine Learning Algorithms for Crowd Detection in Public Transportation, International Journal for Scientific Research and Development, 6(1), (2018), ,pp. 2037 -2041. ISSN (online): 2321-0613.
  53. Yuvaraj N and Balaji, M, ‘Issues and Challenges in Wireless Sensor Network Security’, International Journal for Scientific Research & Development, 6(1), (2018), pp. 1846-1850. ISSN (online): 2321-0613 (EI).
  54. Dr.N.Yuvaraj and P. Kanaga Priya, A Survey on Sensors and Cultivation using Machine Learning Algorithms”, International Journal for Scientific Research & Development, 6(1), (2018), pp. 2020-2024. ISSN (Online):23210613

    55. 2017

  55. Sri Preethaa K R and Vimala "Multilevel Data Security Protection Mechanism for Cloud Storage System", International Journal of Science, Engineering and Technology Research, 6(5), (2017), pp 862-870.
  56. Yuvaraj, N, Gowdham, S, Dinesh Kumar & Mohammed Aslam Batcha, ‘Effective On-Page Optimization for Better Ranking’, International Journal of Computer Science and Information Technologies, 8(2), (2017), pp. 266-270.
  57. Yuvaraj N , Dharchana K and Abhenayaa B, ‘Performance Analysis of different Text classification Algorithms’, International Journal of Scientific & Engineering Research, 8(5), (2017), pp. 18- 22.
  58. Yuvaraj N and Shripriya R, “An Effective Threshold Selection Algorithm for Image Segmentation of Leaf Disease Using Digital Image Processing’, International Journal of Science, Engineering and Technology Research, 6(5), (2017). ISSN: 2278 -7798.
  59. Akila Muthuramalingam, Jenifa Gnanamanickam, and Ramzan Muhammad, “Optimum Feature Selection Using Firefly Algorithm for Keystroke Dynamics”, Springer, Advances in Intelligent Systems and Computing, 736, (2017), pp. 399-406.

    60. 2016

  60. Yuvaraj N & Sabari, A, ‘Twitter Sentiment Classification Using Binary Shuffled Frog Algorithm’, Auto Soft - Intelligent Automation and Soft Computing published by Taylor and Francis. 1(1), (2016), pp.1-9. DOI: 10.1080/10798587.2016.1231479
  61. Yuvaraj, N and Emerentia, M, ‘Best Customer Services among the E-Commerce Websites - A Predictive Analysis’, International Journal Of Engineering And Computer Science, 5(6), (2016), pp. 17088 – 17095.
  62. Yuvaraj, N, Sugirtha and Jency John, ‘Fraud Ranking Detection in E-Commerce Application using opinion mining’, International Journal of Engineering Technology and Sciences, 3(3), (2016), pp. 117-119.
  63. K.R. Sri Preethaa and M. Radhika "Visualizing social network: a survey" Advances in Natural and Applied Sciences, special edition, 10, (2016), pages 8-13.
  64. Yuvaraj N and Menaka K, ‘A survey on crop yield prediction models’, International Journal of Innovations and Developments, 5(12), 2016. ISSN: 2277 -5390.
  65. Yuvaraj N & Sabari, A, ‘An Extensive Survey on Information Retrieval and Information Recommendation Algorithms Implemented in User Personalization’, Australian Journal of Basic and Applied Sciences, 9(31), (2016), pp. 571-575.
  66. Yuvaraj N and Sabari, A, ‘Performance Analysis of Supervised Machine Learning Algorithms for Opinion Mining in E-Commerce Websites’, Middle-East Journal of Scientific Research, 1(1), (2016), pp. 341-345.
  67. K.R.Sri Preethaa, S.Nishanthini, D.Santhiya, K.Vani Shree, Crop Yield Prediction, International Journal On Engineering Technology and Sciences, 1(1), (2016), pp 111-116.
  68. K.R. Sri Preethaa, M. Nagammai, S. Sivaranjani and T. Swathy, SEO Techniques for Enhancement of Site Visibility, Middle-East Journal of Scientific Research (Techniques and Algorithms in Emerging Technologies), 24, (2016), pp. 18-23.
  69. T.Rajasekaran , P.Jayasheelan and K.R. Sri Preethaa, Predictive Analysis in Agriculture to Improve the Crop Productivity using ZeroR algorithm, International Journal of Computer Science and Engineering Communications, 4(2), (2016), pp. 1397-1401.

    70. 2015

  70. N.Yuvaraj, K.R.Sri Preethaa, Dr. A.Sabari "A High End Sentimental Analysis in Social Media Using Hash Tags" Journal of Applied Science and Engineering Methodologies, 1(1), (2015), pages 137-143.
  71. Yuvaraj N and Sri Preethaa K R, “Improvising the accuracy of sentimental analysis of social media with Hashtags and Emoticons”, International Journal of Advances in Engineering Science and Technology, 4(3), 2015. ISSN: 2319-1120.

    2021

  1. Sreelatha P., Faritha Banu J., T. Ch. Anil Kumar., Sugumar D, Shailendra Kumar Rawat., Ahmad Jawad Niazi., “Improved Clustering Using Deep Learning Model on Water Resource Engineering Bioscience Biotechnology Research Communication” (2021), http://dx.doi.org/10.21786/bbrc/14.7.73
  2. Yuvaraj K P., Sowmya S., Anandkumar R., Sudarvizhi D., Balaji D., Hari Shankar S B., Paalpandi K., Gokularaman B., “Role of Tool Pin Profile and Rotational Speed On Mechanical Properties And Micro structural Behavior Of Friction Stir Welded Aa7075-T651 And Aa6061 Dissimilar Alloy Joints”, Design Engineering (2021), ISSN: 0011-9342, Issue: 7, Pages: 13852- 13860
  3. Sreelatha P., Mudassir Khan D., Sugumar., Paritala Jhansi Rani., Manikandan Ganesan., Prashant Kumar., Smart and Effective Environment Monitoring Using Internet of Things, Bioscience Biotechnology Research Communication (2021), http://dx.doi.org/10.21786/bbrc/14.7.57
  4. Ganeshkumar D., Ram Nivas., “Design and Implementation of Hands-free Electronic sanitizer dispenser”, First International Conference on Smart Technologies, communication and Robotics (2021), DOI:10.1109/STCR51658.2021.9588890.
  5. Jothin R., Vasanthanayaki C., Sreelatha P., Mohamed M., “Comparison and extension of high-performance adders for hybrid and error tolerant applications”, Journal of Ambient Intelligence and Humanized Computing (2021), https://doi.org/10.1007/s12652-021-03574-2
  6. Dr.R.Ranjithkumar, Dr.D.Ganeshkumar, Mr.Senthamilarasu, "Efficient and secure data hiding in video sequence with three layer security; An approach using chaos http://doi.org/10.1007/s11042-020-10324)
  7. Investigating a single slope solar still with a nano-phase change material Materials Today: Proceedings Elsevier https://doi.org/10.1016/j.matpr.2020.12.80
  8. Thermal characteristics analysis of a phase change material under the influence of nano-particles, Materials Today: Proceedings Elsevier, https://doi.org/10.1016/j.matpr.2020.12.505
  9. Dr. Sreelatha P Mr. Sridhar Udayakumar Dr. S. Karthick Smitha Chowdary Ch K. Ch. Sri Kavya Dr. Madiajagan M, "Managing The Tomato Leaf Disease Detection Accuracy Using Computer Vision Based Deep Neural Network", Journal of Contemporary Issues in Business and Government, 2021, Volume 27, Issue 1, Pages 3425-3437
  10. Foot-ulcer Wound Analysis Using Image Segmentation and Morphological Operations, Annals of R.S.C.B., ISSN:1583-6258, Vol. 25, Issue 2, 2021, Pages. 3552 - 3558 Scopus 0.03
  11. Smart Electronic Pill Popper System with Circular Containers, Annals of R.S.C.B., ISSN:1583-6258, ISSN:1583-6258, Vol. 25, Issue 2, 2021, Pages. 3625 - 3630 Scopus 0.03
  12. P Sreelatha, P Bhuvaneswari, Ellappan Venugopal, Diabetic Retinopathy Detection: SolutionsThrough Application of Meta-HeuristicApproaches", Annals of the Romanian Society for Cell Biology, Vol 25, Issue2, pg.4353–4361.ISSN: 1583-6258
  13. Jothin, R., Sreelatha, P., Ahilan, A. et al. High-Performance Carry Select Adders. Circuits Syst Signal Process (2021). https://doi.org/10.1007/s00034-021-01658-0
  14. Fabrication of Dual Layered Biocompatible Herbal Biopatch from Biological Waste for Skin-Tissue Regenerative Applications,International Journal of Biological Macromolecules May 2021 Web of Science, Scopus, SCI 5.162
  15. Shahina Parveen M., Sreelatha P., Ramamani Tripathy, Shamim Hassan, Subhashini Narayan, Sridhar Udayakumar,"Predict the severity level and early prediction of COVID-19 using CEDCNN classifier for big data", International Journal of Grid and Distributed Computing, Vol. 14 No. 1 (2021)

    16. 2020

  16. Ms.D.Sudarvizhi, "Experimental and Theoretical Investigations on Thermal Conductivity of the Paraffin Wax using CuO Nanoparticles" Materials today- Elseiver, Vol No 22 ,Issue 4 1987-1993 https://doi.org/10.1016/j.matpr.2020.03.164
  17. Ms.D.Sudarvizhi, "Wireless smart insole using combinational sensors for foot-ulcer detection and pressure distribution" Waffen -Und Kostumkunde Journal ISSN No 0042-9945 Vol XI Issue 6
  18. Ms.D.Sudarvizhi, "Foot ulcer recognition and wound healing analysis using image segmentation and morphological opeartions" Waffen -Und Kostumkunde Journal ISSN No 0042-9945 Vol XI Issue 6 Page 237 - 241
  19. Allwyn Gnanadas Shankar, S. (2020). Enhanced relative K based Numbering Out of Time Slices (erKNOTS) to locate epileptic seizure origin. Solid State Technology, 63(4), 4290–4300.
  20. Shankar, N., Sathish Babu, S., Gnanadas, A., & Rajmohan, V. (2020). Volumetric Estimation of Femur Bone for Detecting Osteoporosis. Journal of Computational and Theoretical Nanoscience, 17(4), 1871–1876.
  21. Allwyn Gnanadas, A., Sathishbabu, S., & Shankar, N. (2020). Post Evaluation of Tumor Cells Using Fused Positron Emission Tomography CT Imaging. Journal of Computational and Theoretical Nanoscience, 17(4), 1877–1879.
  22. Rajeshwari R Sreelatha P , Bharath V, Allwyn Ganadas A, "Effect of desepcekling of ultrasound images using anistropic diffusion method" Waffen-und kostumkunde journal,ISSN No 0042-9945. Vol XI, Issue 6.
  23. Bharath V, Rajeshwari R Sreelatha P , Allwyn Ganadas A,"Identification of spread and type of skin cancer using boundary tracing, support vector machine and minimum distance classifier" ,Waffen -Und Kostumkunde Journal ,ISSN No 0042-9945. Vol XI, Issue 6
  24. Bharath V, Aashika K.G, Priyadharshini P, "Corrosion Resistance Of Copper T In Synthetic Uterine Fluid (Suf) Under Excess Glucose And Sodium Chloride" International Journal of Advanced Science and Engineering Research, ISSN: 2455-9288, Volume: 5, Issue: 1, 2020
  25. Mr. Bharath.V, Ms. Maheshwari.P , Ms. Olive Danita.S, Ms Jayaprabha S, " Diagnosis Of Survival Intimidation Ventricular Arrhythmia With Ecg-Based Processor" International Research Journal of Modernization in Engineering Technology and Science ISSN: 2582-5208 Volume:02/Issue:07
  26. Mr. Bharath. V, Ms. Priya Dharshni. K, Ms. Mathivathana. M, Ms. Naveena. J, "Thermistor Respiratory Praeposter System", International Research Journal of Modernization in Engineering Technology and Science, ISSN: 2582-5208, Volume:02/Issue:08
  27. T Divya Bharathi, R Hariprasad, S Sree Niranjanaa Bose, M Swathy, "Application of Photoplethysmographic Signals for Anesthesia Automation in Operation Theatres", International Journal of Advanced Science and Technology, Vol. 29, Issue 4, 2020
  28. S Sree Sanjanaa Bose, S Sree Niranjanaa Bose and M.Maniventhan, "A Review on Feature Extraction Techniques of Photoplethysmogram Signal”, Innovations in Information and Communication Technology, pp. 380-383, December 2020.
  29. S Sree Sanjanaa Bose, S Sree Niranjanaa Bose," Applications of Encoding Methods for False Alarm Elimination in Physiological Monitors: A comparative Analysis", International Journal of Engineering and Technology, Vol. 9, Issue 8, Aug 2020.
  30. T. Gayathri, S. Sree Sanjanaa Bose and T. Poornima, "Nanorobots and their Biomedical Applications", International Journal of Engineering Research and Technology, Vol. 9, Issue 7, 2020.
  31. S.SankarGanesh, P. Sreelatha,V. Bhanu Rekha, P. Aswani Kumar, Bharani Murugesane, K. Sakthisudhan ,"Textile antennas for breast carcinoma diagnosis application", Materials today Proceedings, 2020, ISBN 978-981-15-8318-6
  32. Application of Photoplethysmographic Signals for Anesthesia Automation in Operation Theatres, "International Journal of Advanced Science and Technology", Volume 29, Issue 4, Pages 8991 - 8995

    33. 2019

  33. Ms.D.Sudarvizhi, "Experimental investigations on thermal management and performance improvement of solar PV panel using a phase change material"AIP Conference Proceedings , Elseiver,Vol 2128, Issue 1, Pages21 -28 https://doi.org/10.1063/1.5117935
  34. Ms.D.Sudarvizhi, "Approaches for detection and analysis of wound ulcer using image processing techniques" International research journal of engineering and technology. ISSN 2395 -0056-0072. Vol 6 Issue 03
  35. A.Allwyn Gnanadas P.Arunkumar, S. S. (2019). Localization of Seizures in Epilepsy using Low Frequency Fluctuations from Rs-fMRI. International Journal of Recent Technology and Engineering, 8(4), 10576–10579.
  36. S. Logesh Kumar , S. Anandhavelu , and M. Swathy, "Preparation and Characterization of Goat Hoof Keratin/Gelatin/Sodium Alginate Base Biofilm for Tissue Engineering Application", Intergerated Electrics, 2019, VOL. 202, 1–12, https://doi.org/10.1080/10584587.2019.167481
  37. Preparation and characterization of goat hoof keratin/gelatin/sodium alginate base biofilm for tissue engineering application, Integrated Ferroelectrics Volume 202, Issue 1, Page 1-12

    38. 2018

  38. Ms.D.Sudarvizhi, "IoT enabled foot pressure monitoring and analysis" International Journal of Research & Development in Technology ,ISSN 2349 -3585 Vol 9 Issue 2
  39. Ms.D.Sudarvizhi, "Pedobarographic insoles with wireless data transmission" , International research journal of engineering and technology, ISSN 2395 -0056-0072. Vol 5 Issue 1
  40. Shankar N Allwyn Gnanadas A, D. S. B. (2018). Analysis of Trabecular bone of femur radiographs for detecting Oestoporosis using MWT

    41. 2015

  41. Ms.D.Sudarvizhi, "Automatic glucose infusion and control system using solenoid valve " , International Journal of Emerging trends in Engineering & Development , ISSN 2249 -6149 Issue 5 Vol 2
  42. Ms.D.Sudarvizhi,"A barcode based courier mailbox system using GSM technology ,International Journal of Emerging trends in Engineering & Development,ISSN 2249 -6149Issue 5 Vol 2

    2022

  1. Donipathi, Reddy Prasad, and Saroj Sundar Baral. "Process Technology for the Removal of Cr (VI) from Wastewater Using Pig Iron Sludge."
  2. Kavitha, S., G. Surendran, S. Karunakaran, and Nitu Kumari. "Removal of contaminants from waste water by using Murrayakoenigii nanoparticles." Materials Today: Proceedings (2022).

    3. 2021

  3. P.Lineesh, Mohanasundaram, Tamilselavan, R.Sathyamoorthy, and A. Chamka, “Recovery of pure silicon and other materials from disposed solar cells.” International journal of photoenergy 1 (2021): 5530213.
  4. V.Mansa Devi, C.Jayakumar, G.Surendran, and Reddy Prasad, “Using the Artificial Neural networks to Predict the Solubility Effects of Theophylline Drug in Hydrotropic Solutions.” International Journal of Pharmaceutical Research 13 (2021): 31838.
  5. S.Karunakaran, P. Lineesh, G. Surendran, Saroj S. Baral, S. Kavitha and C. Jayakumar, “Remediation of Cr(VI) from wastewater using biochar of Indian Grass.” IOP Conf. Series: Materials Science and Engineering 1145 (2021): 012115.
  6. P.Lineesh, and G.Surendran, “Microwave heating of food materials: Role of susceptor” IOP Conf. Series: Materials Science and Engineering 1145 (2021): 012022.
  7. G.Surendran, S.Karunakaran, N.Prabhu, S.Karthika Devi, and T Gajendran, “Sequestration of Potential Enzymes from Mushrooms compost waste.” IOP Conf. Series: Materials Science and Engineering 1145 (2021): 012116.
  8. N. Bhanu Teja, M. Mohamed Abdul Hafeez,, G. Surendran, M. Rajeshwaran, N. Alagumurthi, “Investigations of performance and emission characteristics in diesel engine fueled with Hemp oil methyl ester”, Materials Today: Proceedings. (2021).
  9. G.Surendran, G.V.Aatral ,S.Samraj,N. Arunkumar, E.Nakkeeran, “Preparation of Anti-immunodeficiency pills by the Herbal solution”,Research Journal of Pharmacy and Technology, 14(6), (2021):00564
  10. S.Karunakaran,N.Prabu,T.Gajendran,V.Manivasagam, “Investigation of novel biological pretreatment for microbial infection control in organic mushroom cultivation”, Journal of Plant cell Biotechnology and Molecular Biology.12(3) (2021)
  11. Karunakaran S, Prabhu N, Gajendran Tholan, Manivasagam Veerasamy. “Investigation Of Novel Biological Pretreatment For Microbial Infection Control In Organic Mushroom Cultivation.” International Journal of Aquatic Science 12 (2021).
  12. Sruthi, Pamula Sri, Sivasamy Balasubramanian, Ponnusamy Senthil Kumar, Ashish Kapoor, Muthamilselvi Ponnuchamy, Meenu Mariam Jacob, and Sivaraman Prabhakar."Eco-friendly pH detecting paper-based analytical device: towards process intensification." Analytica Chimica Acta 1182 (2021): 338953.
  13. Sridhar, Adithya, Ashish Kapoor, Ponnusamy Senthil Kumar, Muthamilselvi Ponnuchamy, Balasubramanian Sivasamy, and Dai-Viet Nguyen Vo. "Lab-on-a-chip technologies for food safety, processing, and packaging applications: a review." Environmental Chemistry Letters (2021): 1-27.
  14. Prabhu, Venkatesh M., S. Balasubramani, Ashish Kapoor, Ketki Joshi, Keya Joshi, and Nasrin Shariffa. "Studies on the feasibility of bisphenol-A removal and its kinetics using Pseudomonas aeruginosa in both flask and an inverse fluidized bed reactor." Chemical Engineering Communications (2021).
  15. T. Kalaivani, P. Anil Kumar, Samridhi , K. Balachandran. Synthesis of Ag Decorated TiO2 Nanoparticles for Ammonia Gas Sensor Application. Journal of Environmental Research Nanotechnology. https://dx.doi.org/10.13074/jent.2021.09.213443
  16. T. Sathyapriya, Manikandan Dhayalan, R.Jagadeeswari,Rathika Govindasamy,Mohammed Riyaz S. U,Moonis Ali Khan,Mika Sillanpä. Assessing bioorganic gum performance as a corrosion inhibitor in phosphoric acid medium: Electrochemical and computational analysis. Materials and Corrosion. https://doi.org/10.1080/00958972.2021.1981302.
  17. D. Sudha, Sundararajan Vairam, Subbarayan. Sarathbabu, Nachimuthu Senthil Kumar, Ramasamy Sivasamy & Suyambulingam Jone Kirubavathy. 2-Methylimidazolium pyridine-2,5-dicarboxylato zinc(II) dihydrate: Synthesis, characterization, DNA interaction, anti-microbial, anti-oxidant and antibreast cancer studies. https://doi.org/10.1080/00958972.2021.1981302
  18. R. Mahalakshmi, R.Saravanan,M. S. Karthikeyan, P. Selvakumar, & L. Ravikumar. Polymeric Substitution of Triazole Moieties in Cellulosic Schiff Base for Heavy Metal Complexation Studies. https://doi.org/10.1007/s10924-02

    19. 2020

  19. Saroj S.Baral, S.Kavitha, and G.Surendran. “Selection of suitable adsorbent for the removal of Cr(VI) by using objective based multiple attribute decision making method.” Preparative Biochemistry & Biotechnology 51 (2020): 69-75
  20. C.Jayakumar,Reddy Prasad,G.Surendran,Veeramani Mansa Devi, Using the Artificial Neural networks to Predict the Solubility Effects of Theophylline Drug in Hydrotropic Solutions, International Journal of Pharmaceutical Research, Volume:13, Issue:2

    2022

  1. Gnanasekaran, Lalitha, Saravanan Rajendran, P. Senthil Kumar, A. K. Priya, F. Gracia, Mohamed A. Habila, and Karunamoorthy Saravanakumar. "Visible light stimulated binary nanostructure and defect enriched TiO2-SnO2 for photocatalysis and antibacterial activity." Materials Letters (2022): 131998.
  2. Divyadharshini, V. M., D. Karthickraja, R. P. Thamilselvan, S. Elavarasan, and V. Yogeshwaran. "Experimental studies on partial replacement of E-waste and Blast Furnace Slag in concrete." Materials Today: Proceedings (2022).
  3. icPriya, Arunkumar, Gururajan Anusha, Sundaram Thanigaivel, Alagar Karthick, Vinayagam Mohanavel, Palanivel Velmurugan, Balamuralikrishnan Balasubramanian et al. "Removing microplastics from wastewater using leading-edge treatment technologies: a solution to mroplastic pollution—a review." Bioprocess and Biosystems Engineering (2022): 1-13.
  4. Priya, A. K., C. Subha, P. Senthil Kumar, R. Suresh, Saravanan Rajendran, Yasser Vasseghian, and Matias Soto-Moscoso. "Advancements on sustainable microbial fuel cells and their future prospects: A review." Environmental Research (2022): 112930.
  5. Zuarez-Chamba, Michael, Saravanan Rajendran, Miguel Herrera-Robledo, A. K. Priya, and Carlos Navas-Cárdenas. "Bi-based photocatalysts for bacterial inactivation in water: Inactivation mechanisms, challenges, and strategies to improve the photocatalytic activity." Environmental Research (2022): 112834.
  6. Nanmaran, R., S. Srimathi, G. Yamuna, S. Thanigaivel, A. S. Vickram, A. K. Priya, Alagar Karthick, J. Karpagam, V. Mohanavel, and M. Muhibbullah. "Investigating the Role of Image
  7. Fusion in Brain Tumor Classification Models Based on Machine Learning Algorithm for Personalized Medicine." Computational and Mathematical Methods in Medicine 2022 (2022).
  8. Kumar, R. Ranjith, S. Thanigaivel, A. K. Priya, Alagar Karthick, Chandrabhanu Malla, P. Jayaraman, M. Muhibbullah, Razan A. Alshgari, and Abdulnasser Mahmoud Karami. "Fabrication of MnO2 Nanocomposite on GO Functionalized with Advanced Electrode Material for Supercapacitors." Journal of Nanomaterials 2022 (2022).
  9. Kumar, R. Ranjith, S. Thanigaivel, Nibedita Dey, A. K. Priya, Alagar Karthick, V. Mohanavel, S. Kannadhasan, M. Muhibbullah, and Sameh M. Osman. "Performance Evaluation of Cyclic Stability and Capacitance of Manganese Oxide Modified Graphene Oxide Nanocomposite for Potential Supercapacitor Applications." Journal of Nanomaterials 2022 (2022).
  10. Elango, K. S., B. Prabu, S. Sathish, Alagar Karthick, V. Sampathkumar, Sanjeev Kumar, V. Mohanavel, M. Ravichandran, M. Muhibbullah, and Sameh M. Osman. "Mechanical and Durability Studies on Ficus exasperata Leaf Ash Concrete." Advances in Civil Engineering 2022 (2022).
  11. Thanigaivel, S., A. K. Priya, Kingshuk Dutta, Saravanan Rajendran, and Yasser Vasseghian. "Engineering strategies and opportunities of next generation biofuel from microalgae: A perspective review on the potential bioenergy feedstock." Fuel 312 (2022): 122827.
  12. Rajendran, Saravanan, T. A. K. Priya, Kuan Shiong Khoo, Tuan KA Hoang, Hui-Suan Ng, Heli Siti Halimatul Munawaroh, Ceren Karaman, Yasin Orooji, and Pau Loke Show. "A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils." Chemosphere 287 (2022): 132369.
  13. Gnanasekaran, Lalitha, A. K. Priya, and F. Gracia. "Orange peel extract influenced partial transformation of SnO2 to SnO in green 3D-ZnO/SnO2 system for chlorophenol degradation." Journal of Hazardous Materials 424 (2022): 127464.
  14. Priya, A. K., V. Yogeshwaran, Saravanan Rajendran, Tuan KA Hoang, Matias Soto-Moscoso, Ayman A. Ghfar, and Chinna Bathula. "Investigation of mechanism of heavy metals (Cr6+, Pb2+ & Zn2+) adsorption from aqueous medium using rice husk ash: Kinetic and thermodynamic approach." Chemosphere 286 (2022): 131796.
  15. Priya, A. K., Lalitha Gnanasekaran, Saravanan Rajendran, Jiaqian Qin, and Yasser Vasseghian. "Occurrences and removal of pharmaceutical and personal care products from aquatic systems using advanced treatment-A review." Environmental Research 204 (2022): 112298.

    16. 2021

  16. Bharani, S., G. Ramesh Kumar, J. Ranjithkumar, G. Boopathi, and G. Singaravelu. "Experimental study of regur soil stabilization by using Non-metallic waste bottles." Materials Today: Proceedings (2021).
  17. Romero-Sáez, M., R. Suresh, N. Benito, Saravanan Rajendran, F. Gracia, Carlos Navas-Cárdenas, A. K. Priya, and Matias Soto-Moscoso. "Defective Ce3+ associated CeO2 nanoleaves for enhanced CO oxidation." Fuel (2021): 122822.
  18. AK, Priya. "Adsorption of Molybdenum from Wastewater by Surface Altered Agricultural Solid Waste." Iranian Journal of Chemistry and Chemical Engineering (IJCCE) (2021).
  19. Kanmani, S., S. Anandaraj, D. Shankar, P. R. Remya, S. Vijaymohan, G. Miruthun, and S. B. Rakhul. "A novel approach on usage of waste sludge from textile dyeing units in paver block manufacturing." Materials Today: Proceedings (2021).
  20. Anandaraj, S., S. Karthik, K. S. Elango, S. Nishiketan, G. Pandiyarajan, P. Nithis Kumar, R. Palanikumar, and M. Harihanandh. "An experimental study on Fly Ash (FA) and marble powder in the properties of Self-Compacting Concrete (SCC)." Materials Today: Proceedings (2021).
  21. Anandaraj, S., V. Rajeshkumar, R. L. Preethy, K. Dhivya, S. Ganeshkumar, G. Anusha, and S. Kanmani. "Strength properties of luffa fibre reinforced concrete containing RHA as cement replacement." Materials Today: Proceedings (2021).
  22. Dharmaraj, R., S. Anandaraj, N. Sanjivnalan, S. Sathish Kumar, N. Shivash, and S. Srisharan. "Experimental studies on the effect of neem seed powder (NSP) as a natural admixture in concrete." Materials Today: Proceedings (2021).
  23. Indhiradevi, P., P. Saravanakumar, S. Anandaraj, S. P. Narendran, P. Mohammed Anas, SR Naveen Saran, and M. Nazir Ahamed. "A case study of using median as an alternative for signal controlled intersection." Materials Today: Proceedings (2021).
  24. Logeswaran, S., S. Anandaraj, S. Yuvaraj, K. S. Jawahar, A. Gokula Krishnan, E. Nandhika, and S. Ajaynivethan. "Assessing the demand of route network for locating a bus terminus in a city–A case study of gandhipuram bus terminus (Coimbatore city)." Materials Today: Proceedings (2021).
  25. Vinodhini, C., S. Anandaraj, S. Logeswaran, S. Gokul, S. Dharanish, R. Gokul Kannan, and V. Bharathi Kannan. "A case study on recent equipment’s in construction." Materials Today: Proceedings (2021).
  26. Vinodhini, C., S. Anandaraj, S. Karthik, R. Dharmaraj, R. Sivabharathi, P. Sivaganesh, M. B. Sivasankar, and V. Yogesh. "Behaviour of concrete by partial replacement of fine aggregate with eco sand." Materials Today: Proceedings (2021).
  27. Anandaraj, S., S. Karthik, S. Vijaymohan, G. S. Rampradheep, P. Indhiradevi, and G. Anusha. "Effects of using white flour, zinc oxide and zinc ash as an admixture in mortar and concrete." Materials Today: Proceedings (2021).
  28. J. Sridhar, D.Jegatheeswaran, D. Vivek, G.Elias “Flexural Behaviour of Chicken Mesh Ferrocement Laminates with Partial Replacement of Fine Aggregate by Steel Slag”, Advances in Materials Science and Engineering, (2021). https://doi.org/10.1155/2021/7307493
  29. Ms. A. K. Priya, V.Yogeshwaran, Saravanan Rajendran, Tuan K.A.HoangdMatiasSoto, AymanA.Ghfa “Investigation of mechanism of heavy metals (Cr6+, Pb2+& Zn2+) adsorption from aqueous medium using rice husk ash: Kinetic and thermodynamic approach”,Chemosphere,Volume286,Part3(2021). https://doi.org/10.1016/j.chemosphere.2021.131796
  30. V. Yogeshwaran, Ms. A. K. Priya “Experimental studies on the removal of heavy metal ion concentration using sugarcane bagasse in batch adsorption process” Desalination and water treatment, 224, pp.256-272.. https:// doi: 10.5004/dwt.2021.27160.
  31. K. R. Sumesh, G.Saikrishnan,P. Pandiyan, L. Prabhu, S. Gokulkumar, Ms. A. K. Priya, P.Spatenka, and S.Krishna, “The influence of different parameters in tribological characteristics of pineapple/sisal/TiO2 filler incorporation ” Journal of Industrial Textiles, p.15280837211022614. https://doi.org/10.1177/15280837211022614.
  32. H. I. Owamah, S. C. Ikpeseni, R. Dharmaraj, S. Gopikumar, R. Malathy, S. Uma, S. O. Sada, S. O. Oyebisi,“ Influence of Diethanolamine on the Properties of Concrete, Corrosion Rate of Rebar and Renewable Energy Generation” Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-021-05974-0.
  33. R. Dharmaraj, Alagar Karthick, G. K. Arunvivek, S. Gopikuma, V. Mohanavel, M. Ravichandran, MurugesanBharani, “Novel Approach to Handling Microfiber-Rich Dye Effluent for Sustainable Water Conservation”, Advances in Civil Engineering, Volume 2021, Article ID 1323472, 10 pages. https://doi.org/10.1155/2021/1323472.
  34. R. Dharmaraj, G. K. Arunvivek, Alagar Karthick, V. Mohanavel, BhagavathiPerumal, S.Rajkumar, “Investigation of Mechanical and Durability Properties of Concrete Mixed with Water Exposed to a Magnetic Field”, Advances in Civil Engineering, Volume 2021, Article ID 2821419, 2021. https://doi.org/10.1155/2021/2821419.
  35. D. Vivek, K.S. Elango, K. GokulPrasath, V. Ashik Saran, V.B. Ajeeth Divine, S. Abimanyu “Mechanical and durability studies of high performance concrete (HPC) with nano-silica”, Materials Today: Proceedings, (2021). https://doi.org/10.1016/j.matpr.2021.09.068.
  36. M. Lakshmi, D. Vivek, S. Vijayalakshmi, J. Ranjitha, A. M. Saravanan, “A review on removal of industrial dyes using low cost natural adsorbents”, AIP Conference Proceedings,Volume2396(2021). https://doi.org/10.1063/5.0066425.
  37. Saravanan Rajendran, Ms. A. K. Priya, Kuan Shiong Khoo, Hui-Suan Ng, Heli Siti Halimatul Munawaroh, CerenKaraman, Pau Loke Show “A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils” Chemosphere, Volume 287, Part 4. https://doi.org/10.1016/j.chemosphere.2021.132369.
  38. Lalitha Gnanasekaran, Ms. A. K. Priya, F Gracia, “Orange peel extract influenced partial transformation of SnO2 to SnO in green 3D-ZnO/SnO2 system for chlorophenol degradation ”Journal of Hazardous Materials. 424(Pt B):127464,. https://doi.org/10.1016/j.jhazmat.2021.127464
  39. Ms. A. K. Priya, Lalitha Gnanasekaran, SaravananRajendran, Jiaqian Qin,Yasser Vasseghian, “Occurrences and removal of pharmaceutical and personal care products from aquatic systems using advanced treatment- A review” Environmental Research. https://doi.org/10.1016/j.envres.2021.112298.
  40. P. Jeevitha, K. S. Elango, L.Ganesh Babu, J. Ranjitha, S. Vijayalakshmi, “Glycerol as a key reactant in the production of 3-hydroxypropanoic acid using engineered microbes”, AIP Conference Proceedings, 2396, 030004. https://doi.org/10.1063/5.0066423.
  41. K. S. Elango, D.Vivek, S.Anandaraj, R. Saravanakumar, J. Sanfeer, S. Saravanaganesh, “Experimental study on self compacting concrete using light weight aggregate”, Materials Today: Proceedings , , 2021. https://doi.org/10.1016/j.matpr.2021.10.240.
  42. R Kavitha, M.C.Sundarraja, P. Indhiradevi, P. Manikandan, S. Archanavaishnavi, G.Karthikeyan,A. AbdulRahman, E.Akash, “Flexural and compressive behaviour of I steel section strengthened by stainless steel plate”, Materials Today: Proceedings , 2021. https://doi.org/10.1016/j.matpr.2021.09.054.
  43. Priya, A. K., R. Suresh, P. Senthil Kumar, Saravanan Rajendran, Dai-Viet N. Vo, and Matias Soto-Moscoso. "A review on recent advancements in photocatalytic remediation for harmful inorganic and organic gases." Chemosphere (2021): 131344
  44. K. S. Elango, R.Gopi, C. Jayaguru, D. Vivek, R. Saravanakumar, V. Rajeshkumar "Experimental investigation on concrete beams reinforced with basalt fiber reinforced polymer bars" Materials Today Proceedings- Elsevier Publication
  45. K. S. Elango, R.Gopi, R. Saravanakumar,V. Rajeshkumar, D. Vivek, S. VenkatRaman "Properties of pervious concrete – A state of the art review" Materials Today Proceedings- Elsevier Publication
  46. K. S. Elango, D.Vivek, G. KrishnaPrakash, M. J. Paranidharan, S. Pradeep, M. Prabhukesavaraj "Strength and permeability studies on PPC binder pervious concrete using palm jaggery as an admixture" Materials Today Proceedings- Elsevier Publication
  47. K. S. Elango, P.R.Remya, D. Vivek, R. Gopi, R. Saravanakumar "Strength and durability studies on Ficus Exasperata leaf ash concrete" Materials Today Proceedings- Elsevier Publication
  48. R. Gopi, M. Harihananth, M.Saravanan and K.S.Elango "Influence of Presaturated sugarcane bagasse ash pellats in concrete" Journal of Critical Reviews ISSN 2394-5125,
  49. K. S. Elango "Properties of light weight concrete – A state of the art review" Materials Today Proceedings- Elsevier Publication
  50. K. S. Elango "Experimental investigation on mechanical properties of flax/banana/industrial waste tea leaf fiber reinforced hybrid polymer composites" Materials Today Proceedings- Elsevier Publication
  51. K. S. Elango "Geopolymer binder for pervious concrete" GRADEVINAR 73 (2021) 3, 1- 10
  52. Ms. A. K. Priya "Utilization of ecofriendly self-cleaning concrete using zinc oxide and polypropylene fibre" Materials Today Proceedings- Elsevier Publication

    53. 2020

  53. Ms. A. K. Priya "Water quality analysis and purification through nano membrane" Materials Today Proceedings- Elsevier Publication
  54. Ms. A. K. Priya "Anthropogenic impacts on the contamination in the coastal region: A review" Materials Today Proceedings- Elsevier Publication
  55. Ms. A. K. Priya "Agro Waste Sugarcane Bagasse as a Cementitious Material for Reactive Powder Concrete" Materials Today Proceedings- Elsevier Publication
  56. Ms. A. K. Priya "The War using microbes: A sustainable approach for wastewater management" Materials Today Proceedings- Elsevier Publication
  57. Ms. A. K. Priya "Biodecolorization of remazol dyes using biochar derived from ulva reticulata: Isotherm, Kinetics, Desorption and Thermodynamic Studies" Materials Today Proceedings- Elsevier Publication
  58. K.S.Elango "A review on natural fiber reinforced hybrid composites: chemical treatments, manufacturing methods and potential applications" Materials Today Proceedings- Elsevier Publication
  59. K.S.Elango and G.Krishnaprakash "Experimental study on pervious concrete using palm jaggery" International Journal for Innovative Research in Science & Technology, ISSN (online): 2349-6010,
  60. K.S.Elango and K.S.Karthik Mani "Experimental Study on Concrete as a Partial Replacement of Steel Slag as Fine Aggregate" International Journal for Innovative Research in Science & Technology, ISSN (online): 2349-6010,
  61. K.S.Elango and S.Arjun Kumar "Utilization of Waste Plastic in Manufacturing of Paver Blocks" International Journal for Innovative Research in Science & Technology”, ISSN (online): 2349-6010
  62. R. Mirudubashini and K.S.Elango "Strength and Durability Study on Concrete Using Different Types of Binders (OPC & PPC)" International Research Journal of Engineering and Technology, e-ISSN: 2395-0056,
  63. K.S.Elango and V.Revathi " Bottom ash based Geopolymer Concrete Paver Blocks" Proceedings of IASTEM International Conference, Colombo, Sri Lanka
  64. R. Geethamani, B. Soundara, S. Kanmani "Production of cost affordable organic manure using institutional waste 4 by rapid composting method" Materials Today Proceedings- Elsevier Publication
  65. R.Dharmaraj "Experimental study on strength and durability properties of iron scrap with flyash based concrete" Materials Today Proceedings- Elsevier Publication
  66. R.Dharmaraj & B.Sivakumar "A feasibility study on cement with addition of Prosopis Juliflora ash as in concrete" Materials Today Proceedings- Elsevier Publication
  67. Arunvivek G.K., Saravanakumar R "Vibration Control Of Steel Frames Using Magnetorheological Dampers: A New Control Algorithm." International Journal of Civil, Environmental and Agricultural Engineering
  68. Revansiddappa, R.Gopi, R.Saravanakumar, S.Dineshkumar, S.Saravanaganesh, A.Chandrasekar. "Cost Assessment of different Grades of Concrete by different Mix Design Methods" Journal of Critical Reviews, ISSN. 2394-5125
  69. C. Kaleeswaran R. Saravanakumar, D.Vivek, K.S.Elango, R.Gopi & D.Balai "A study on cold formed steel compression member - a review" Materials Today Proceedings- Elsevier Publication
  70. B. S. Meenakshi "Sustainable Performance of Confined Concrete Beam in Cyclic Loading with GFRP Laminates using Ansys Modelling" Journal of Green Engineering Volume-10, Issue 11, November 2020
  71. B. S. Meenakshi "Effect of confinement on concrete beams under cyclic loading with GFRP laminates" Materials Today Proceedings- Elsevier Publication
  72. B. S. Meenakshi , K. Sanjai, V. Srikumar, P.Balaji , R. Gobikrishna "Repair of cracks by using a Geopolymer with ambient curing" GEDRAG & ORGANISATIE REVIEW - ISSN:0921-5077
  73. V.Rajeshkumar, S.Vinoth "Impact of industrial effluents on geotechnical properties of soil" Materials Today Proceedings- Elsevier Publication
  74. V.Rajeshkumar, S.Anandaraj,V.Kavinkumar "Analysis of factors influencing formwork material selection in construction buildings" Materials Today Proceedings- Elsevier Publication
  75. V.Rajeshkumar "Study on mechanical properties of fiber reinforced self-compacting concrete" Materials Today Proceedings - Elsevier Publication
  76. V.Rajeshkumar"Effective selection of formwork using computer application" AIP Conference Proceedings 2327, 020044
  77. V.Rajeshkumar "Remazol Effluent Treatment in Batch and Packed Bed Column Using Biochar derived from Marine Seaweeds" Nature Environment and Pollution Technology. p-ISSN: 0972-6268. Vol 19 pp. 1931 – 1936, 2020
  78. P.Indhiradevi, P.Manikandan, K.Rajkumar, S.Logeswaran "A comparative study on usage of cowdung ash and wood ash as partial replacement in flyash brick" Materials Today Proceedings- Elsevier Publication
  79. G.Rameshkumar, Santhosh D, Bharani S "Influence of e-waste in bituminous mixes" Materials Today Proceedings- Elsevier Publication
  80. S. Bharani , G. Rameshkumar , J. Manikandan, T. Balayogi , M. Gokul , D.C. Bhuvanesh "Experimental investigation on partial replacement of steel slag and E-waste as fine and coarse aggregate" Materials Today Proceedings- Elsevier Publication
  81. D.VIvek, J Sridhar "Study on mechanical properties of concrete with partial replacement of fine aggregate by used foundry sand" International Journal of Civil Engineering and Technology
  82. D.VIvek, J Sridhar "Mechanical and Flexural Behaviour of High Performance Concrete Containing Nano Silica" International Journal of Engineering and Advanced Technology
  83. D Vivek, KS Elango, R Saravanakumar, B Mohamed Rafek, P Ragavendra, S Kaviarasan, E Raguram "Effect of Nano-Silica in high performance concrete" Materials Today Proceedings- Elsevier Publication
  84. D.Vivek "Influence of non-biodegradable wastes on mechanical properties of concrete – A neural network approach" IOP Conference series: Materials Science and Engineering (1025) January 2021
  85. D.Vivek "Experimental Investigation on strengthening of reinforced concrete beams using GFRP Laminates" Materials Today Proceedings- Elsevier Publication
  86. V.Kavinkumar, R. Dharmaraj, S. Elavarasan "DEVELOPMENT OF SUB-GRADE LAYER USING SCRAP TIRE AND STABILISED EXPANSIVE SOIL" Materials Today Proceedings- Elsevier Publication

    87. 2019

  87. S Elavarasan, Ms. A. K. Priya, V Kavin Kumar "Manufacturing fired clay brick using fly ash and M− Sand" Materials Today Proceedings- Elsevier Publication
  88. S Elavarasan, Ms. A. K. Priya, R Raja Gurusamy, J Mohamed Riyas Naveeth, S Natesh "Experimental study on compressed earth block using fly-ash stabilizer" Materials Today Proceedings- Elsevier Publication
  89. S Elavarasan, Ms. A. K. Priya, N Ajai, S Akash, TJ Annie, G Bhuvana "Experimental study on partial replacement of cement by metakaolin and GGBS" Materials Today Proceedings- Elsevier Publication
  90. S. Venkat Raman "Comparison of theoretical and analytical investigation on axial compressive behaviour of concrete filled steel tubular columns" Materials Today Proceedings- Elsevier Publication
  91. V.Kavinkumar "Review of materials used in Light weight Concrete"Materials Today Proceedings- Elsevier Publication
  92. Ms. A. K. Priya, Yogeshwaran V Thamilselvan R.P, Adlin Rino. M "Treatment of fish processing industrial waste water using immobilized jacketed column reactor" International Journal of Scientific & Technology Research
  93. K. S. Elango, V. Revathi "Infiltration and clogging characteristics of pervious concrete" Asian Journal of Civil Engineering
  94. Ms. A. K. Priya, M. Nithya, B. Dinesh, J.Bajan Singh "Removal of Heavy Metals by Biosorption Technique using Halophilic Fungi" International Journal of Engineering and Advanced Technology (IJEAT)
  95. D. Vivek, D.Jegatheeswaran, J. Sridhar "Mechanical and Flexural Behavior of High Performance Concrete Containing Nano Silica" International Journal of Engineering and Advanced Technology (IJEAT)
  96. Yogeshwaran V and Ms. A. K. Priya "Adsorption of Lead Ion Concentration From The Aqueous Solution using Tobacco Leaves"Materials Today: Proceedings
  97. J Sridhar "Study on Strength and Durability Properties of High Performance Concrete Incorporating Nano-Silica" International Journal of Advanced Research in Science, Engineering & Technology Volume 6, Issue 5

    98. 2018

  98. Ms. A. K. Priya "Industrial Waste water treatment using advanced - A Review" IJEAT Volume 8, Issue 3
  99. Ms. A. K. Priya "Removal of heavy metals using Nano materials - A Review" IJEP Volume 39, Issue 1
  100. K. Rajkumar "A Study on Asian Public Private Partnership in Infrastructure Projects" IJMTE Volume 8, Issue 12
  101. P. Selvarajkumar "Eco friendly High Strength concrete production using silica mineral waste as fine aggregate - An Ecological Approach" Ecology, Environment and Conservation Volume 24, Issue 2
  102. P. Selvarajkumar "Using Silica Mineral Waste as aggregate in a green high strength concrete- Workabiliy, Strength, Failure mode and morphology assesment
  103. R. Gokulan, G. Ganesh Prabhu, S. Hariharasuthan "Optimization of Bio- Hydrogen Production From Bio-Wastes" Ecology, Environment and Conservation, 2018 Vol. 24
  104. Sridhar J "Effect of industrial waste- steel slag in impact behaviour of ferrocement panels" Ecology Environment and Conservation, Vol. 23, No. 3, pp. 472-478,2018
  105. Ragunath S "Suitability Analysis of Ground and Surface water quality for domestic purpose along upstream side of Coimbatore city" International Journal of ChemTech Research Vol.10, No.11 pp 205-212,2017
  106. Ragunath S, Ms. A. K. Priya "Investigation of water contamination in Noyyal river in the reach of Coimbatore city links" International Journal of ChemTech Research Vol.10, No.11 pp 201-204,2017
  107. Ragunath S "Seasonal water quality indexing on surface storage and subterranean dispersion at Ukkadam Periyakulam tank in Coimbatore city" Ecology Environment and Conservation, Vol. 24, No. 1, pp. 411-416,2018
  108. Saranya K "Soil Stabilization using rubber waste and cement (Standard proctor test and CBR)" International Journal of Civil Engineering and Technology Vol.8, No.6, June 2017, pp 629-638
  109. Shriindhu J "Influence of Mineral Admixture on strength aspects of self compacting concrete" International Journal of ChemTech Research Vol.10,No.11 pp 102-108,2017
  110. Saranya K "An Experimental Study of concrete by partial replacement of cement by bagasse ash and coarse aggregate by recycled aggregate" International Journal of ChemTech Research Vol.10, No.11 pp 91-94,2017

    111. 2017

  111. Praveen S "Air Quality Index (AQI) for Development of Environmental Impact Assessment (EIA) Reports of Urban Infrastructural Projects in Coimbatore City" Nature Environment and Pollution Technology, vol. 17, no. 01, pp. 323-328, 2018
  112. M Senthil Kumar Praveen S "Exploration of competence and cost efficacy of Psychiatry for water draw off system" Ecology, Environment and Conservation, vol. 24, no. 01, pp. 469-475, 2018
  113. Praveen S "Kinetic modelling of growth on biodegradation of Naphthalene using of Rhodococcus sp" Ecology, Environment and Conservation, vol. 24, no. 03, 2018
  114. Sridhar J "Behaviour of ferrocement laminates with industrial waste-steel slag under flexure" Ecology, Environment and Conservation, vol. 24, (February Suppl.), pp. (S432- S440), 2018
  115. Ganesh Prabhu G "Using carbon – fibre- reinforced polymer to strengthen concrete-filled steel tubular columns" Structures and Buildings, ICE Publishing, Paper 1600015

    116. 2016

  116. Ms. A. K. Priya "Removal of Hexavalent Chromium by Adsorption Using Natural Wastes" Advances in Recycling and Waste Management, Vol 2, Issue 3
  117. Ms. A. K. Priya "Phytoremediation of Heavy Metals and its exploitation –Review" International Journal of Advanced Research, Vol 04,No 10, pp320-323, 2016
  118. Ms. A. K. Priya "Experimental Analysis on Recycled Plastic reinforced concrete" International Journal of Advanced Engineering and Technology, Vol 7, No 2, pp 1027-1029, 2016
  119. Ms. A. K. Priya "Bioremediation of color and COD from dye effluent using indigenous and exogenous microbes" Desalination and Water Treatment, Vol 59, pp. 243– 247
  120. Ms. A. K. Priya M Nithya "Biodegradation approach for an upcoming disaster (plastic)" Asian Journal of research in social sciences and Humanities, Vol.7 No.2, pp560-565,2017
  121. Letcham K "Use of Super absorbing polymers for internal curing of conventional concrete with low w/c ratio" International Journal of Engineering Research and Technology, Vol 05, No 11, pp 161-165,2016
  122. Anandaraj S Kavin Kumar V "Experimental Study on behavior of high early strength fiber reinforced concrete using polyester and glass fibers" International Journal of Engineering Research and Technology, Vol 05, No 12, pp 482-486,2016"
  123. Anandaraj S Letcham K "Experimental Study on behavior of fiber reinforced concrete using polyester and glass fibers"International Journal of Engineering Research and Technology, Vol 05, No 11, pp 597-601,2016
  124. Nithya M "Experimental Investigation on impact of sand mining in coastal regions and potential reuse of silica sand as construction materials" International Journal geomarine sciences, Vol.45, No.07, pp 885-888,2016
  125. Nithya M "Study on compressive strength of concrete using magnesite waste as partial replacement for fine aggregate" International Journal of Advanced Engineering and Technology, Vol 7, No 2, pp 469-470, 2016
  126. Karthik D "Experimental Investigation on partial replacement of fine aggregate by using river crushed stone" International Journal of Engineering Trends and Technology, Vol. 41, No 03,pp 124-126,2016
  127. Raja Murugadoss J Ganesh Prabhu G. "Performance Analysis of CFRP Composite Strips Confined RC Columns under Axial Compression" Advances in Materials Science and Engineering, Volume 2015, pp. 1-18, 2015
  128. Raja Murugadoss J Ganesh Prabhu G. "Effects of Concentrical Partial (Local) Compression on the Structural Behavior of Concrete Filled Steel Tubular (CFST) Column" Advances in Materials Science And Engineering, Volume 2015, pp. 1-9, 2015
  129. Raja Murugadoss J Ganesh Prabhu G "Behavior of Concrete Filled Steel Tubular (CFST) Column under Axial Compression" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32262-32271, 2015
  130. Raja Murugadoss J "Adsorption of Fluoride And Iron From Aqueous Solution Using Almond shell As Adsorbent" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32437-32442
  131. Raja Murugadoss J "Studies on Adsorption of Fluoride and Iron from Aqueous Solution using Limonia Accidissima as Adsorbent" Journal of Industrial Pollution Control, Volume 31, Issue 1, 2015
  132. Ganesh Prabhu G "Development of Eco- Efficient Engineered Cementitious Composites Using Supplementary Cementitious Materials as A Binder and Bottom Ash Aggregate as Fine Aggregate" International Journal of Polymer Science
  133. Ganesh Prabhu G "Mechanical and Durability Properties of Concrete Made with Used Foundry Sand as Fine Aggregate" Advances in Materials Science And Engineering, Article ID 161753, Vol. 2016
  134. Ganesh Prabhu G "Eco-Friendly Porous Concrete Using Bottom Ash Aggregate For Marine Ranch Application" Waste Management and Research, SAGE Publications, 2015
  135. Ganesh Prabhu G "Compressive Behaviour Of Circular CFST Columns Externally Reinforced Using CFRP Composites" Thin Walled Structures, Elsevier Publications. Vol. 87, pp. 139-148, 2016
  136. Ganesh Prabhu G "Flexural Behavior of Concrete Beam with GGBS and Fly Ash as Supplementary Cementitious Material" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32310-32315
  137. Ganesh Prabhu G, Elayaraja S "Effects of Geogrid Reinforcement on the Static Liquefaction Behavior of Granular Fill" International Journal of Applied Engineering Research, Vol. 10, No.47, pp. 32240-32253, 2015
  138. Ganesh Prabhu G, Letcham K "Use of Super Absorbing Polymers (SAP) As an Internal Curing Agent for Conventional Concrete with High W/C Ratio" International Journal of Applied Engineering Research, Vol. 10, No.47, pp. 32425-32436, 2015

    139. 2015

  139. Selvaraj Kumar P "Study on Carbon fiber reinforced concrete," International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32414-32419, 2015,
  140. Selvaraj Kumar P "Study And Analysis On Rice Husk Ash In Concret", International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32314-32319, 2015
  141. Selvaraj Kumar P "Experimental Study On Sandcrete Blocks With Rice Husk Ash And Eco Sand As A Partial Replacement Of Cement & Sand" International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32353-32358, 2016
  142. Selvaraj Kumar P "Experimental Study On Rice Husk Ash In Concrete" International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32512-32516, 2016
  143. Ragunath S "Assessment of Ground Water And Tank Water Quality in The Downstream Tank of Coimbatore City" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32408-32413
  144. Ms. A. K. Priya "Remediation of Heavy Metals from Electroplating Effluent using bacterial Strains in Up flow Immobilized Column Reactor" Journal of Pure and Applied Microbiology, vol.9, no.2, pp. 1411-1416
  145. Ms. A. K. Priya "Assessment of Tendu Leaf Refuses for the HeavyMetal Removal from Electroplating Effluent" Journal of Pure and Applied Microbiology Vol.10, no.1, pp. 585-591
  146. Ms. A. K. Priya "Evaluation of Strength Properties of Pavement Binder Replaced with Waste Materials as Modifier" International Journal of ChemTech Research CODEN (USA): IJCRGG Vol.9, No.01 pp 248-252
  147. Ms. A. K. Priya "Experimental Investigation on Developing Low Cost Concrete by Partial Replacement of Waste Sludge" International Journal of ChemTech Research CODEN (USA): IJCRGG Vol.9, No.01 pp 240-247
  148. Gokulan R "Impact on Distillery Effluent on the Physico- Chemical and Geotechnical Behaviour of Soil" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32290-32298, 2016
  149. Gokulan R "Bacterial Self-Healing Concrete – An innovative repair technique" International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32281-32290, 2015
  150. Balasubramaniam N. Krishnaraaju G. Sathishkumar R. "Mechanical Properties of Self Compacting Concrete with Partial Replacement Coarse Aggregate by Steel Slag" International Journal of Applied Engineering Research, Volume 10, Number 47, special issue,pp. 32443-32449
  151. Keerthika.S. ShriIndhu, J. "Experimental Investigation on Steel Fiber Reinforced Concrete using various geometrical Steel Fibers" International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32478-32485, 2015
  152. Ragunath S. "Assessment of Ground Water And Tank Water Quality in The Upstream Tank of Coimbatore City" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32506-32516, 2016
  153. Prabakaran E "A Comparision Study of Compressive Strength for Conventional Brick Masonry & Pet Bottle Masonry" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32544-32551, 2015
  154. Prabakaran E "A Comparision Study Of Compressive Strength For Supplementry Cementitious Material Concrete" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32495-32505, 2015
  155. Prabakaran E "Experimental study of Fly ash based Concrete with magnetized industrial treated waste water" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 32552-32557, 2015
  156. Raja Murugadoss J "Studies on Adsorption of Iron from Aqueous Solution using Almond Shell as Adsorbent" International Journal of scientific research, Volume 3, Issue 10, pp. 1-3, 2014
  157. Raja Murugadoss J "High Dimensional Data Clustering using Cuckoo Search Optimization Algorithm" International Journal of Advanced Computer Engineering and Communication technology, Volume 3, Issue 3, pp.2319-2526, 2014
  158. Raja Murugadoss J "Modeling for Removal of Nickel and Lead from Industrial Wastewater by Adsorption" Journal of Water pollution and Purification Research, Volume 1, Issue 3, pp. 13 -17, 2014
  159. Raja Murugadoss J "Evaluating Optimal Design of Trusses with the Aid of Cuckoo Search Algorithm" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue
  160. Raja Murugadoss J "Adsorption of Fluoride from Aqueous Phase by Agro Based Adsorbent" Journal of Science and Research, Volume 3, Issue 9,pp. 2067 -2069, 2014
  161. Ganesh Prabhu G. "Effects of foundry sand as a fine aggregate in concrete production" Construction and Building Materials, Vol. 2014

    162. 2014

  162. Ganesh Prabhu G. "Compressive Behaviour of RC Column With Fibre Reinforced Concrete Confined By Cfrp Strips"Advances In Materials Science And Engineering, Hindawi Publishing Corporation, Volume 2014,2014
  163. Ganesh Prabhu G. "Strengthening of Hollow Square Sections (HSS) Under Compression Using FRP Composites" Advances In Materials Science And Engineering, Hindawi Publishing Corporation, 2014
  164. Ganesh Prabhu G "Experimental Investigation on Strengthening of CFST Members Under Flexure Using CFRP Fabric" The arabian Journal for Science and Engineering, Springer Publications, Volume 39, Issue 2, pp 659-668, 2014
  165. Elayaraja S "Study On The Behaviour Of Waste Tyres In Flexible Pavement Construction" International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32272-32276, 2015
  166. Elayaraja S "Geosynthetics – An alternate solution for stabilization of rainfall Induced Landslide Slope" International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32272-32276, 2015
  167. Gokulan R. "Optimization of Conditions for Biohydrogen Production From Industrial Waste by Anaerobic Co-digestion" Nature Environment and Pollution Technology, Vol 13, Issue No 4, pp. – 791-794, 2014"
  168. Lakshmi Keshav "Finite Element and Experimental Analysis of 3D Masonry Compressed Stabilised Earth Block Brick Building Models against Earthquake Forces Period" Polytech. Civil Eng., Vol. 58, No. 3, pp. 255-265
  169. Lakshmi Keshav "Shaking Table Study of Two Reduced-Scale Single-Storey HCSE Block Masonry Building Models" Arabian Journal Science Engineering, Springer Publication, 2014, Volume 39, Issue 4, pp. 2551-2560
  170. Elayaraja S "Evaluation of seismic hazard and potential of earthquake induced landslides of the Nilgiris, India" Natural Hazards (NHAZ) journal, 2015
  171. Elayaraja S "Study on the Shear strength property of Black cotton soil subjected to lime stabilized swell control process" International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32372-32375, 2015
  172. Elayaraja S "Classification of plaque and blood clot in carotid ultrasound image" International Journal of Applied Engineering Research, Volume 10,Number 47 special issue, pp. 32403-32407, 2015
  173. Elayaraja S "Development of Economical and Durable Hollow Concrete Building Block" International Journal of Applied Engineering Research, Volume 10, Number 47 special issue, pp. 30260-302261, 2015
  174. Kanmani S "Bioclogging in porous media: influence in reduction of hydraulic conductivity and organic contaminants during synthetic leachate permeation" Journal of Environmental Health Science & Eng., Vol. 12, No. 127, 2014
  175. Ms. A. K. Priya "Bioremediation of Dye Effluent and Metal Contaminated Soil: Low- Cost Method for Environmental Clean up by Microbes" J Environ. Science & Engg. Vol. 57, No. 2, p. 109-119
  176. Gokulan R. Elayaraja S "Assessment of Physicochemical characteristics of municipal waste water microalgae" International Journal of ChemTech Research, Vol 6.No 1 pp. 515-520, 2014
  177. Gokulan R. "Best Dilution Ratio and GCMS Analysis for the Removal of Nutrient from municipal wastewater by microalgae" International Journal of ChemTech Research, Vol 6.No 1 pp. 515-520, 2014
  178. Gokulan R. Ragunath S. "Comparative study on treatment of municipal wastewater with carbondioxide sequestration by microalgae" International Journal of ChemTech Research, Vol 6.No 1 pp. 609-618, 2014

    2022

  1. M. Anuradha, G. Mani, T. Shanthi, N. R. Nagarajan, P. Suresh et al., Intrusion detection system for big data analytics in IoT environment," Computer Systems Science and Engineering, vol. 43, no.1, pp. 381–396, 2022. https://doi.org/10.32604/csse.2022.023321.
  2. Selva Mary, G., Blesswin, A.J. & Kumar, S.M. Self-authentication Model to Prevent Cheating Issues in Grayscale Visual Secret Sharing Schemes. Wireless Pers. Commun. (2022). https://doi.org/10.1007/s11277-022-09628-8
  3. R. Thangaraj, P. Pandiyan, T. Pavithra, V. K. Manavalasundaram, R. Sivaramakrishnan and V. K. Kaliappan, "Deep Learning based Real-Time Face Detection and Gender Classification using OpenCV and Inception v3," 2021 International Conference on Advancements in Electrical, Electronics, Communication, Computing and Automation (ICAECA), 2021, pp. 1-5, doi: 10.1109/ICAECA52838.2021.9675635.
  4. S. Rajendar and V. K. Kaliappan, "Recent Advancements in Autonomous Emergency Braking: A Survey," 2021 5th International Conference on Electronics, Communication and Aerospace Technology (ICECA), pp. 1027-1032, doi: 10.1109/ICECA52323.2021.9675885.
  5. Hariharan Bhagavathi, Siva Rathinavelayatham, Kaliraj Shanmugaiah, Kamaraj Kanagaraj, Dinesh Elangovan “Improved beetle swarm optimization algorithm for energy efficient virtual machine consolidation on cloud environment “, Concurrency and Computation Practice and Experience, https://doi.org/10.1002/cpe.6828.
  6. K.Thirumalai Raja, N.Jayanthi “Durability performance of self compacting concrete with agricultural by products as cement replacement”, Journal of Environmental Protection and Ecology, (Jan 2022), Vol 22 Issue 6, 2402-2416
  7. K. Thirumalai Raja, N. Jayanthi, Jule Leta Tesfaye, N. Nagaprasad, R. Krishnaraj, V. S. Kaushik, "Using an Artificial Neural Network to Validate and Predict the Physical Properties of Self-Compacting Concrete", Advances in Materials Science and Engineering, vol. 2022, Article ID 1206512, 10 pages, 2022. https://doi.org/10.1155/2022/1206512

    8. 2021

  8. M. Naveenkumar, S. Srithar, B. Rajesh Kumar, S. Alagumuthukrishnan and P. Baskaran, "InceptionResNetV2 for Plant Leaf Disease Classification", 2021 Fifth International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud) (I-SMAC), 2021, pp. 1161-1167, doi: 10.1109/I-SMAC52330.2021.9641025.
  9. G.Kalpana, Sweta Gupta, Dr.A.Devipriya, Sarojkumar “Efficient Internet of Things Smart Agricultural Crops Growth using Machine Learning with mobile applications”, Indian journal of Ecology, (2021) Volume 48 issue 6, 1647-1654
  10. Tuan Anh Nguyen, Iure Fe, Carlos Brito, Vishnu Kumar Kaliappan, “Performability Evaluation of Load Balancing and Fail-over Strategies for Medical Information Systems with Edge/Fog Computing Using Stochastic Reward Nets”, Sensors (2021), 21, 6253.
  11. S. Srithar, Arokia Jesu Prabhu L, Vetrimani Elangovan, M. Naveenkumar, S. Alagumuthukrishnan, “Mutism Guide: A Real-Time Sign Spelling Recognition using Skeleton based Improved Haar Support Vector”, IEEE Xplore (2021)
  12. Rohini, M., Surendran, D. & Manoj, S.O. “Prognosis of Alzheimer's Disease Progression from Mild Cognitive Impairment Using Apolipoprotein-E Genotype”, J. Electr. Eng. Technol. (2021). https://doi.org/10.1007/s42835-021-00967-3
  13. Rajendar, Sivramakrishnan, Kaliappan, V. K. “Sensor Data Based Anomaly Detection in Autonomous Vehicles using Modified Convolutional Neural Network”, Intelligent Automation & Soft Computing (2021), 32(2), 859–875.
  14. Sumathi, Appasamy C., Muthuramalingam Akila, Rocío Pérez de Prado, Marcin Wozniak, and Parameshachari B. Divakarachari. "Dynamic Bargain Game Theory in the Internet of Things for Data Trustworthiness" Sensors (2021), no. 22: 7611. https://doi.org/10.3390/s21227611
  15. Devipriya, A., Prabu, P., Venkatachalam, K., Ibrahim, A. Z. “Kernel Granulometric Texture Analysis and Light RES-ASPP-UNET Classification for Covid-19 Detection”, CMC-Computers, Materials & Continua, (2021) 71(1), 651–666
  16. Irina V. Pustokhina, Denis A. Pustokhin, Aswathy RH, T. Jayasankar, C. Jeyalakshmi, Vicente García Díaz, K. Shankar, “Dynamic customer churn prediction strategy for business intelligence using text analytics with evolutionary optimization algorithms”, Information Processing & Management, (2021), Volume 58, Issue 6
  17. P. Kumari, P. Thangaraj, “Optimized Delbpa Algorithm for Binary Pattern Biometric Key Authentication in Cloud Data Production”, Dynamic Systems and Applications (2021) Volume 30, Issue 10
  18. Gopi, R., Muthusamy, P., Suresh, P., G., C., Pustokhina, I. V. et al. “Optimal Confidential Mechanisms in Smart City Healthcare”, CMC-Computers, Materials & Continua, (2021) 70(3), 4883–4896.
  19. Arunkumar, A., Surendran, D. “Autism Spectrum Disorder Diagnosis Using Ensemble ML and Max Voting Techniques “ , Computer Systems Science and Engineering,(2021) 41(1), 389–404.
  20. Jayanthi, N., Manohari, D., Sikkandar, M. Y., Aboamer, M. A., Waly, M. I. et al.” Multi-Model Detection of Lung Cancer Using Unsupervised Diffusion Classification Algorithm”. Intelligent Automation & Soft Computing,(2021) 31(2), 1317–1329
  21. Joy Lal Sarkar, Ramasamy V., Abhishek Majumder, Chhabi Rani Panigrahi, Gomathy B, Bibudhendu Pati, Apu Kumar Saha, “SensMask: An Intelligent Mask for Assisting Patients during COVID-19 Emergencies”, Computación y Sistemas,(2021) Vol. 25, No. 3, pp. 483–492
  22. Thangaraj, R., Anandamurugan, S., Pandiyan, P. et al. “Artificial intelligence in tomato leaf disease detection: a comprehensive review and discussion”, J Plant Dis Prot (2021). https://doi.org/10.1007/s41348-021-00500-8
  23. John Blesswin, A., Selva Mary, G. & Manoj Kumar, S. “Multiple Secret Image Communication Using Visual Cryptography”, Wireless Pers Commun (2021). https://doi.org/10.1007/s11277-021-09041-7
  24. J.Jeyabharathi, V.Sakthivel, R.Sivaramakrishnan, “Hamburger Stand Support System Using Supervised Machine Learning Algorithms”, Journal of Physics: Conference series, (2021) Vol. 1979, Series. 012029.
  25. Sivaramakrishnan Rajendar, Dhivya Rathinasamy, R. Pavithra, Vishnu Kumar Kaliappan, S. Gnanamurthy, “Prediction of stopping distance for autonomous emergency braking using stereo camera pedestrian detection,”, Materials Today: Proceedings, (2021)
  26. J.K.Kiruthika, B.S.Neshamoney, L.Madhan Kumar, V.Mugunthan “Churn Prediction in Telecom Sector using Deep Neural Network with Flask Application”, IOP Conf. Series: Materials Science and Engineering, 1166 (2021) 012060
  27. Dr.Syed Khasim, Dr.M.Pandi, Dr T Sivakumar, Dr.S.Veeramani,Purshottam J. Assudani, “A Hybrid Bird Swarm-Differential Search Methods, Based On Wsn For Trusted Cluster-Based Energy And Lifetime Aware Routing”, International Journal of Aquatic Science, (2021) Vol 12, Issue 01.
  28. Dr.N.Magendran, Dr.D.Banumathy, Dr.V.Vignesh, Dr.R.Vijayakumar, "Improved Clustering Techniques for Genes Selection to identify the Breast Cancer", Turkish journal of Physiotherapy and Rehabilitation, vol 32, issue 3,pg no: 3413-3419
  29. PremkumarMurugiah, Shreeharan, Subash, Yuvaraj, "HUMAN FACE RECOGNITION IN CROWDED ENVIRONMENT", Turkish journal of Physiotherapy and Rehabilitation, vol 32, issue 3,pg no: 3410-3413
  30. Nitin B Raut, Niveda M, Nivetha G, Parameshwari P, "Extraction of Polarity from Textual Information based on Machine Learning Approach", Annals of the Romanian Society for Cell Biology, Vol 25, Issue 5, 2021 pg.no: 5138-5146
  31. Mr. Nitin B Raut, Praveen Raja M, Kishor V, Prathap M, ""Driver Drowsiness Detection System Using CNN Approach Based on Image Processing", Annals of the Romanian Society for Cell Biology, Vol 25, Issue 5, 2021 pg.no: 5501-5508
  32. Satish Kanapala, Vijayaganth V, A. Ranjith, L. Saravanan, Anitha G, G Ramkumar,"A Performance Analysis on Social Based Routing Protocols for Mobile Sensing Networks", Turkish journal of Physiotherapy and Rehabilitation, vol 32, issue 2,pg no: 3515-3522
  33. Dr.P.Thangaraj, Mr.M.Praveen Kumar, Ms.R.Janani, Dr.A.Devipriya, Ms.M.Salomi, "Diagnosis and Forecast Of Diabetes Mellitus Using Neural Network", Journal of Cardiovascular Disease Research, vol.12, issue no. 3,Issn: 0975-3583
  34. Dr. J. Angel Ida Chellam, Dr.M.SivaSangari, Dr.R.Rajendra Kumar, "Drought Prediction Using AI Based Multiple Linear Regression Technique", Journal of Cardiovascular Disease Research, vol.12, issue no. 3,Issn: 0975-3583
  35. Dr.M.SivaSangari, Dr. J. Angel Ida Chellam, Dr.R.Rajendra Kumar, "A Study and Analysis Of Government Policies And Support System Influences Migration Of Workers With Special Reference To Coimbatore City", Journal of Cardiovascular Disease Research, vol.12, issue no. 3 Issn: 0975-3583
  36. Dr.M.Saravanan, Mr.S.Manoj Kumar, "Improved authentication in vanets using a connected dominating set-based privacy preservation protocol", The Journal of Supercomputing,(2021) Issue 12
  37. Dr. Vignesh V, Dr.S.Hariharagopalan, Mr.M.Mohan, Ms.R.S.Ramya, Mr.Anantha Kumar, "A Quantum-based Blockchain approach to Voting Protocol using Hyperledger Sawtooth", Journal of Physics :Conference Series, vol.1916,ISSN: 1742-6596
  38. Dr. Vignesh V, Dr.S.Hariharagopalan, Ms.Celsia, Ms.Indumathi, Ms.Harida, "Certain Investigation on IoT Based Smart Pill Carafe In Health Care", Journal of Physics :Conference Series, vol.1916, ISSN: 1742-6596
  39. Mr. K Azarudeen, Dr. G Vinoth Chakkaravarthy, Mr. PremkumarMurugiah, Mr. Kharthikeyan S, "A Novel Approach for Pattern String Matching in Intrusion Detection System", Journal of Physics :Conference Series, vol.1916, ISSN: 1742-6596
  40. Mr. NaveenKumar M, V Vijayaganth, M Mohan, "Number Plate Detection and Recognition using a Novel Computer Vision Approach for Indian Motor Vehicles", Journal of Physics :Conference Series, vol.1916, ISSN: 1742-6596
  41. Ms. Geetha S K, Ms. S.Sathya, Ms.SakthiSree, "A Secure Digital E-Voting System using Blockchain framework", Journal of Physics :Conference Series, vol.1916, ISSN: 1742-6596
  42. Ms. NandhiniN, K.B.Srisathya, "Identification of Plant Leaf Diseases Using Adaptive Neuro Fuzzy Classification", Journal of Physics :Conference Series, vol.1916, ISSN: 1742-6596
  43. Ms. Kiruthika J K, Dr.Janani.A.P, Sudha.M, Yawanikha.T, "Fine Grained Sentimental Analysis of Social Network Chat Using R", Journal of Physics :Conference Series, vol.1916, ISSN: 1742-6596
  44. Mr.S.Srithar, Mettildha Mary I, Baskaran P, Maheswaran T, "Improved Haar Cascade Feature Extraction and Access Control Framework for Rich Internet Applications", Journal of Physics :Conference Series, vol.1916, ISSN: 1742-6596
  45. Mr.S.Srithar, Priyadharsini M, Margret Sharmila F, Rajan R, "Yolov3 Supervised Machine Learning Framework for Real-Time Object Detection and Localization", Journal of Physics : Conference Series, vol.1916, ISSN: 1742-6596
  46. Dr.Balamurugan, Suganya B, "An efficient real time facial expressions identification using SVM", Journal of Physics : Conference Series, vol.1916, ISSN: 1742-6596
  47. Dr.P.Thangaraj, S.P.Santhoshkumar, M.SalomiSamsudeen, Dr.A.Devipriya, "Mobile data collectors in Wireless Sensor Networks - Life Time Expansion", Journal of Cardiovascular Disease and Research, Vol 12, ISSUE 03, ISSN: 0975-3583, 0976-2833
  48. Y.AdlineJancy, B.Gomathy, A.BenuelSathishRaj, "A Secure Ant Colony based Trust computation Model in Wireless Sensor Networks", Journal of Physics: Conference Series, vol 1937
  49. J. Jeyabharathi, K.B.Sri Sathya, S.Fowjiya, A.Tamizharasi, "Online Healthcare Medical Devices For Patient Monitoring System Using IOT-Cloud", Turkish journal of Physiotherapy and Rehabilitation, vol 32, issue 2,pg: 3384-3391
  50. K.Vidhya, Dr. Nagarajan B, Dr.R.Kalaiselvi, "Covid-19 Prevalence Prediction Using Resnet-50 Deep Learning Technique", Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 12, Issue 3, pg.no: 01-09
  51. K.Vidhya, Mrs.V.Rasikha, Mr.T.ChitraKumar, Mrs.S.Fowjiya, "Deep Belief Network (DBN) Approach for Classification of COVID-19 Impact on People with Diabetes", Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 12, Issue 3
  52. Ms. Geetha S K, Ms.Suganthi A, Dr.P.Arulprakash, Ms.R.Roopa, Mr.T.Udhyakumar, "Covid Free Challan Form Filling System", Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 12, Issue 3
  53. Suresh P, Aswathy RH, Jeeva kumar VK, Gowtham R, Gopalakrishnan.T, "E-Agronomy: Smart irrigation decision making system using Machine learning in Precision Agriculture", Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 12, Issue 3 69-81
  54. P.Robert, Velmurugan A.K, P.Suresh, A.M.Senthil Kumar, "Analysis and comparison various machines learning algorithm for credit card fraud detection", Design Engineering, Vol 2021, Issue: 7, ISSN: 0011-9342
  55. S Kharthikeyan, Suruthi J P, Suruthika S, "Securing Digital academic Records using Blockchain", Annals of the Romanian Society for Cell Biology, Vol 25, Issue 5 4026-4038
  56. Dr.B.Gomathy, Karpagapriya D, Mohamed Asif M, Parthasarathy E, "IoT based Smart Irrigation system using Machine learning algorithms", Annals of the Romanian Society for Cell Biology, Vol 25 , Issue 5 596-601
  57. Mr. Srithar S, Sanjai Kumar S, Subash E, "Card-Less Face ATM System Using Machine Learning Approach", Annals of the Romanian Society for Cell Biology, Vol 25, Issue 4 15398-1540
  58. Dr.S.Hariharagopalan, Dr.V.Vignesh, Dr. N.Mahendran, Mrs.T.Preethi, Mr.P.Dinesh, "Dynamic clinical trials management in anunreliable environment using Blockchain", Design Engineering, Vol 2021, Issue 5
  59. Mr.Prabhakaran P, Dr.R.S. Mohana, Dr.S.Kalaiselvi, "Enhancing the cyber security Intrusion Detection based on generative adversarial Network", Ilkogretim Online - Elementary Education Online, Vol 20, Issue 5, pp 7401-7408.
  60. Thangaraj, Rajasekaran, S. Anandamurugan, P. Pandiyan, and Vishnu Kumar Kaliappan. "Artificial intelligence in tomato leaf disease detection: a comprehensive review and discussion." Journal of Plant Diseases and Protection (2021): 1-20.
  61. Kiruthika J K,Savitha L ,Shanmathi M,Shrimathi S,Bairavi.N. (2021). "Ration Goods E-Check", Annals of the Romanian Society for Cell Biology, Vol 25, Issue 5, Pg.No 3393–3399
  62. K.Vidhya, P.Swetha, M.Vaisnavi and S.Varshini, "A Machine Learning Approach to Prevent Malicious Calls over Telephony Networks", Turkish Journal of Computer and Mathematics Education (2021), Vol 12 No.9
  63. M. Raghul, M. Nishit, P. Manoj Kumar, K. Vidhya. (2021). "Covid-19 Future Forecasting Using Supervised Machine Learning Models", Annals of the Romanian Society for Cell Biology, vol 12, issue 9, pg no. 560–569
  64. D Kavin Kumar, V Vijayaganth, M Naveenkumar, M Mohan, Nitin B Raut, P Purusothaman, "A Cascaded Technique for Hyper Parameters Optimization in Convolutional Neural Network Using K-Means and Bayesian Approach", Journal of Computational and Theoretical Nanoscience (2021), Volume 18 Issue 3 pages 833-840
  65. Dr.Devipriya A, Dinesh S, Ajith C, "Gas Level and Leakage detection system", Turkish Journal of Physiotherapy and Rehabilitation (2021), Vol 32, Issue 3
  66. Ms.Nandhini N, Subhasree S, Rooba V, "Fake news Detection using Machine Learning Algorithm", Turkish Journal of Physiotherapy and Rehabilitation (2021), Vol 32 Issue 3
  67. B. Koushika, G. PraveenKumar, S.T. Priyadharshini, A. Balamurugan. (2021). "An Efficient Car Parking Slot Identification System Using Image Processing", Annals of the Romanian Society for Cell Biology, vol 25, issue 5, pg.no. 3400–3414
  68. Haritha B., Girija S., Barkavi B., Balamurugan A. (2021). "Smart Entertainer System Using Deep Learning", Annals of the Romanian Society for Cell Biology, vol 25, issue 5, pg.no. 540–547
  69. Dr. M. Siva Sangari, Kaviya L., Meenakshi K. L., Nikaldharan R. (2021). "Intelligent Smart Shopping and Stock Notification Using IoT", Annals of the Romanian Society for Cell Biology, vol 25, isue 5, pg.no. 306–311
  70. Dr. M. Siva Sangari, Dhivakar E., Gowthaam K. (2021). "Secret Knock Detecting Door Lock", Annals of the Romanian Society for Cell Biology, vol 25, issue 5, pg.no. 406–410
  71. S. Karthic, P. N. Senthil Prakash, B. Hariharan, Kamaraj K., Siva R. (2021). "A Hybrid SVM-LDA based Heuristic Method for Dimensionality Reduction in Cancer Detection using Genetic Algorithms", Annals of the Romanian Society for Cell Biology, vol 25, issue 4, pg.no. 4410–4419
  72. V.Nirmala, Dr. B. Gomathy. (2021). "Detection and Analysis of Local, Global and Texture Features of the Pumpkin Leaf Images Using Cv Algorithms to Improve the Productivity Rate of Pumpkins", Annals of the Romanian Society for Cell Biology, vol 25, issue 4, pg.no.8886–8895
  73. Surya B., Titu Joachim P., Salomi Samsudeen M. (2021). "Ai Based Crop Identification Mobile App", Annals of the Romanian Society for Cell Biology, vol 25, issue 4, pg.no.3351–3358
  74. Sri Gnaana Vel K. S., Sri Guru Vel K. S., Salomi Samsudeen M. (2021). "E Chief Attendance: Digital Attendance Register", Annals of the Romanian Society for Cell Biology,vol 25, issue 4, pg.no. 11212–11219
  75. Srithar S, Swathi P., Tamilarasi A. (2021). "Face Mask and Social Distance Detection Using Deep Learning Techniques", Annals of the Romanian Society for Cell Biology, vol 25, issue 5, pg.no.08–15
  76. Vijayaganth V., Pragathi C., Nivetha S., Preethi K. (2021). "Implementation of Machine Learning in Vanet Routng", Annals of the Romanian Society for Cell Biology, vol 25, issue 4, pg.no.9451–9460
  77. Vijayaganth V., Bhavadharini S., Deepti Sharma, Dharini K. S. (2021). "Design and Implementation of Overlay File System for Cloud-Assisted Mobile Applications", Annals of the Romanian Society for Cell Biology, vol 25, issue 4, pg.no. 9467–9475
  78. Dr.A.Devipriya, Ms.Ranchita J, Ms.Latshana T, Ms.Kavin R, "Machine Learning Approach for Sensing Harmful Gas Detection", Turkish Journal of Physiotherapy and Rehabilitation (2021), Vol 32, Issue 2
  79. Ms.Geetha S.K, Ms.Sweetha Preethi G R , Ms.Sreenithi R, "Educational Certificate verification using Blockchain based Framework", Turkish Journal of Physiotherapy and Rehabilitation (2021), Vol 32, Issue 2
  80. Dr.Kingsy Grace R, Ms.J.Anitha, Mr.R.Sivaramakrishnan, Mr.M.S.S.Sivakumar, "Crop and Weed Classification using Deep Learning", Turkish journal of Computer and Mathematics Education (2021), Vol 12, Issue 7
  81. Ms.S.Biruntha, Mr.R.Sivaramakrishnan, Ms.J.Boopala, Ms.K.Indhu, Ms.S.Laxmiprabha, Ms.j.J.Nannila, "Ayurveda based Constituent Balancing in human body using Machine Learning Techniques" Journal of Huazhong University of Science and Technology (2021), Vol 50 Issue 3
  82. Dr.M.Siva Sangari, Dr.K.Baskaran, "Comparative Analysis of Multihoming based VANET protocols", Turkish Journal of Physiotherapy and Rehabilitation (2021), Vol 32, Issue 2, Pages:1808-1816
  83. Dr.A.Devipriya, Dr.T.Sujatha, Mr.R.Sivaramakrishnan , Ms.R.Janani, Dr.D.Brindha, "Certain Investigation on Cardiovascular Monitoring System Using Internet of Things", Turkish Journal of Physiotherapy and Rehabilitation (2021), Vol 32 Issue 2
  84. Geetha S. K., Jaipriya P., Adhiswarnalakshmi P., Ashwanthkumar A. (2021). "Secured Amount Transaction System Based On Facial Recognition Using Open CV", Annals of the Romanian Society for Cell Biology (2021), 193–198
  85. Gomathy B., Balasubramanian R., Barkavi S., Gowarthini G. (2021). "Driver Drowsiness and Distraction Detection using Machine Learning", Annals of the Romanian Society for Cell Biology (2021), 589–595
  86. Gomathy B., Balasubramanian R., Barkavi S., Gowarthini G. (2021). "Machine Learning Based Smart Irrigation System", Annals of the Romanian Society for Cell Biology (2021), 596–601
  87. Ms.M.Sumathi, Mr.Rajkamal M, Dr.B.Gomathy, Mr.Infant Raj I, Dr.Sushma Jaiswal, Ms.Swathi M, "Secure Blockchain Based Data Storage and Integrity Auditing in Cloud ", Turkish journal of Computer and Mathematics Education (2021), Vol 12, No.9, 159-165
  88. Shanmugavadivel, G., Gomathy, B. & Ramesh, S.M. "An Enhanced Data Security and Task Flow Scheduling in Cloud-enabled Wireless Body Area Network", Wireless Pers Commun (2021). https://doi.org/10.1007/s11277-021-08493-1
  89. Balamurugan, Ms. A. K. Priya, M.D., Janakiraman, S. et al. "Hybrid Stochastic Ranking and Opposite Differential Evolution-Based Enhanced Firefly Optimization Algorithm for Extending Network Lifetime Through Efficient Clustering in WSNs", J Netw Syst Manage 29, 33 (2021). https://doi.org/10.1007/s10922-021-09597-6
  90. Mr.Mohan M, Sanjay K M, Subhash Chandra Bose M, "Food supply chain using Blockchain Technology", Turkish journal of Computer and Mathematics Education (2021), Vol 12. No.7 858-863
  91. Mr.Mohan M, Sankavi, Sharmitha V, "Cyber attack type detection using deep learning algorithm", Turkish journal of Computer and Mathematics Education (2021), Vol 12. No.7 854-857
  92. Mr. Prabhakaran P., Mr. Sanjaya Praveen T., Mr. Saran M. (2021). "Credit Card Fraud Transaction Analysis System", Annals of the Romanian Society for Cell Biology (2021), 9484–9488
  93. Dr.N.Jayanthi, Dr.Thirumalairaja, Githanjali Wadhwa, K.Shneka, R.Swathi "IoT based -civil Labour Safety Monitoring System in Construction Site", Turkish journal of Computer and Mathematics Education, Vol 12. No.9 1723-1728
  94. P. Prabakaran, NITHYANANTHAN B, MITHESH S, KARTHIK M. "PRODUCT RECOMMENDER SYSTEM", EEO. 2021; 20(5): 5657-5661. doi:10.17051/ilkonline.2021.05.639
  95. Ms. R. H.Aswathy, Dr. S. Koteeswaran, Mr.P. Suresh "Closed-Loop Irrigation Decision Support System:An Internet of Things Based Closed Loop Irrigation Decision Support System for Precision Agriculture Using Machine Learning", Journal of Computational and Theoretical Nanoscience (2021), Vol. 18, 942–948
  96. Aswathy R. H, Suresh P, Roslin Dayana K, Rober+B37t P, "Multiparameter Optimization Technique Based on Enhanced Neuro Genetic Model (ENGM) for Precision Agriculture", Journal of Computational and Theoretical Nanoscience (2021) Vol. 18, 1031–1037
  97. Mr.S.Kandasamy, Kaviyarasu S, Naveen G,Rahul R, "Color Fudus Image of Convolutional Neural Networks for Diabetic Retinopathy Macular Edema", Turkish journal of Computer and Mathematics Education (2021), Vol.12, No. 9, page no: 231-233
  98. Kandasamy Sellamuthu, Akshaya S., Anush J., Arunkumar S. (2021). "A Machine Learning Approach to Analyze and Predict the Severity of Road Accidents", Annals of the Romanian Society for Cell Biology, 4241–4248
  99. Nivaashini, M., Thangaraj, P. "Computational intelligence techniques for automatic detection of Wi-Fi attacks in wireless IoT networks". Wireless Netw (2021). https://doi.org/10.1007/s11276-021-02594-2
  100. Dr.P.Perumal, Mr.Kandasamy, K.Vanitha,V.K.Manavalasundaram, "Guava Leaf Disease classification using Support Vector Machine", Turkish journal of Computer and Mathematics Education (2021), Volume 12 No.7 Pg no: 1177-1183
  101. A.Tamizharasi, Dr.P.Ezhumalai, S.Remya Rose, S.Logeswari, Mr.P.Suresh "Bio Inspired Approach for generating test data from user stories", Turkish journal of Computer and Mathematics Education (2021), Vol 12. No. 2 (2021) pg.no: 412-419
  102. J. Ravindrababu, Arun Sadanand Tigadi, J.K. Kiruthika, Mohd Zeeshan Ansari, "Performance evaluation of the sequential neural network decoder with improved bit error rate", Materials Today: Proceedings, 2021,"
  103. Makanya devi K, Mr.K.Kandasamy, Sathiskumar V E, Sasikumar R, Firos A "Efficient Healthcare Assisting Cloud Storage Strategy using Fog Prioritization Logic based on Edge Devices", Turkish Journal of Computer and Mathematics Education ( 2021)Vol 12 Issue no 2
  104. Santhosh S, Sakthivel M S, Saravanan M, Thangaraj P. (2021). "Smart Learning for Toddlers", Annals of the Romanian Society for Cell Biology, 7934
  105. Gitanjali Wadhwa, N. Jayanthi, Muthu Jayanthi M., Nandhini M., Priyadharssini G. (2021). "Depiction and Evolution of Intelligent Monitoring System for Garbage Using Internet of things", Annals of the Romanian Society for Cell Biology, 7380–7386
  106. Gitanjali Wadhwa, Dr. Jayanthi N., Mansi Mathur. (2021). "A Deep Convolutional Neural Network Approach for Detecting Malignancy of Ovarian Cancer Using Densenet Model", Annals of the Romanian Society for Cell Biology, 25(2), 4449–4458
  107. Dr. Jayanthi N., Gitanjali Wadhwa. (2021). "Classification of Breast Cancer Detection Using K-Nearest Neighbor Algorithm Trained with Wisconsin Dataset", Annals of the Romanian Society for Cell Biology, 25(2), 4440–4448
  108. Dr. Rajasekar S S, Dinesh P S, Dr.Swathy priyadharsini P, Ramya R and Mageshkumar B "Classification of Healthy and Affected Lungs by Pneumonia Disease from X-Ray Images of Lungs using Inception Model", Journal of Xidian University Page No: 466- 470 March 2021"
  109. Kumar, Suresh. (2021). "KNOWLEDGE BASED SOFTWARE DEFINED NETWORK FAST HANDOFF MECHANISM FOR FUTURE MOBILE NETWORK",. INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY. 12. 228-236. 10.34218/IJEET.12.3.2021.030
  110. Dr. M. S. Nidhya, Dr. L. Jayanthi, Dr. R. M. Sekar, Dr. J. Jeyabharathi, Ms. Poonam. (2021). "Analysis of Machine Learning Algorithms for Spam Filtering", Annals of the Romanian Society for Cell Biology, 25(2), 3469–3476. 
  111. Mr. S. Ranjithkumar, Mr. Kandasamy Sellamuthu, Mr. R. S. Rajkumar, Mr. V. Krishnakumar. (2021). "Certain Investigation on Load Balancing using Cloudlet Assignment and min-max Algorithm", Annals of the Romanian Society for Cell Biology, 2223–2229
  112. V. Ramasamy, B. Gomathy, Joy Lal Sarkar, Chhabi Rani Panigrahi, Bibudhendu Pati, Abhishek Majumder, "DCQSH: Dynamic Conflict-Free Query Scheduling in Heterogeneous Networks during Emergency," Computing and Systems (2021), doi: 10.13053/CyS-25-1-3455
  113. Dr.A.Balamurugan, Dr.M.Devapriya, A. Christy Jeba Malar & Sengathir Janakiraman Lamarckian Learning-based Whale Optimization Algorithm to Localize NLOS nodes for achieving reliable data dissemination in VANETs," International Journal of Communication Systems (2021), https://doi.org/10.1002/dac.4738"
  114. R. S. Krishnan, A. Kannan, G. Manikandan, S. S. KB, V. K. Sankar and K. L. Narayanan, "Secured College Bus Management System using IoT for Covid-19 Pandemic Situation," 2021 Third International Conference on Intelligent Communication Technologies and Virtual Mobile Networks (ICICV), 2021, pp. 376-382, doi: 10.1109/ICICV50876.2021.9388378
  115. Balamurugan, Ms. A. K. Priya, M.D., Malar, A.C.J. et al. "Raccoon optimization algorithm-based accurate positioning scheme for reliable emergency data dissemination under NLOS situations in VANETs". J Ambient Intell Human Comput (2021). https://doi.org/10.1007/s12652-020-02839-6
  116. Aswathy RH, Dr. N. Malarvizhi "A design of Lightweight ECC based cryptographic algorithm coupled with Linear congruential method for resource constraint area in IoT", Journal of Ambient Intelligence and Humanized Computing, https://doi.org/10.1007/s12652-020-02788-0

    117. 2020

  117. Dr.P.Thangaraj, Dr.Devipriya A, Ms.Salomi, Dr.Vignesh, Mr.Sahasranaman, "IoT based Skin Cancer Detection - A systematic Survey", Solid state Technology, Vol 63 Issue 6
  118. Dr.A.Devipriya, Dr.D.Brindha, Ms.N.R.Deepa, Dr.Y.Baby Kalpana, "Automatic Segmentation of Spinal Cord in MRI Images via Iterative Cuckoo Search based Random Walker and Online Kernel Learning (OKL) Classifier", European Journal of Molecular & Clinical Medicine, Vol 07, Issue 09, Pages 875-891
  119. S. Kharthikeyan, D. Kavin Kumar, Premkumar Murugiah, K. B. Sri Sathya, "PRIVACY PROTECTION OF COVID 19 CLASSIFICATION USING FULLY HOMOMORPHIC ENCRYPTION", Journal of Critical Reviews,JCR. 2020; 7(18): 4226-4233
  120. Dr.M.Siva Sangari, R. Rajendra Kumar, Dr.P.Thangaraj, Dr.A.Devipriya, Ms.M.Salomi Samsudeen, "Technology Factors Of Online Shopping And Its Impact On Attitude With Special Reference To Student Community", European Journal of Molecular & Clinical Medicine, Volume 07, Issue 08
  121. Ms.K.Vidhya, Dr N.Jeyanthi,Dr. Nagarajan B, "IMPROVED CNN BASED DATA ANALYTIC MODEL FOR DIABETIC RETINOPATHY PREDICTION", European Journal of Molecular & Clinical Medicine, Volume 7, Issue 11
  122. Dr.J.Jeyabharathi, Dr.K.Loheswaran, V.Subba Ramaiah, T.Kumaravel, "Restaurant Recommendation system using Support Vector Machine and Naïve Bayes Classifier Machine Learning Algorithms", International Journal of Future Generation Communication and Networking, Volume 13, No 4 (2020), PP 3426-3430
  123. Mr.S.Srithar, Mr.T.Maheswaran, Ms.Gitanjali Wadhwa "An Iot Based Engineering Solution For Covid’19 Community Spread Using Machine Learning Approach", International Journal of Future Generation Communication and Networking, Volume 13, No 4 (2020), PP 3644-3655
  124. Dr.D.Surendran, Mr.Diwakaran M,Dr.V.Anandkumar "My Privacy My Decision Control Of Photo Sharing In Online Media", European Journal of Molecular & Clinical Medicine, Volume 7, Issue 8, Pages 2562-2569"
  125. Dr.P.Thangaraj,Mr.Ganesh Karthikeyan, Mr.S.Karthik, "Towards developing hybrid educational data mining model (EDM) for efficient and accurate student performance evaluation", Soft Computing, Doi: 10.1007/s00500-020-05075-4
  126. Dr.Devipriya A,Dr.P.Thangaraj,Dr.Kousalya A,Ms.Salomi M,Ms.Geetha S K, "Automatic Cardiac Rhythm Monitoring System using Internet of Things", European Journal of Molecular & Clinical Medicine Volume 7, Issue 2, 2020. Pages 5511-5519
  127. Ms.M.Salomi,Dr.P.Thangaraj,Dr.A.Devipriya,Dr.M.Siva Sangari,Dr.B.Gomathy, An Intelligent Bigdata Flavor Space Bizarre", Journal of Solid State Technology,Vol. 63 No. 6"
  128. Ms.M.Salomi, Dr.P.Thangaraj,Dr.A.Devipriya,Dr.M.Siva Sangari,Dr.B.Gomathy, "Cooking with big data-Bizarre Recipes" Journal of Solid State Technology,Vol. 63 No. 6
  129. Dr.D.Surendran,Sivaranjani Balakrishnan, "Secure Information Access Strategy for a Virtual Data Centre, "International Journal of Computer Systems Science and Engineering", Vol.35, No.5, pp. 357-366
  130. Dr.D.Surendran, M. Rohini, "Toward Alzheimer’s disease classification through machine learning", Soft Computing Doi: https://doi.org/10.1007/s00500-020-05292-x
  131. Ms.M.Salomi, S.Appavu alias Balamurugan, "A predictive risk level classification of diabetic patients using deep learning modified neural network", Journal of Ambient Intelligence and Humanized Computing Doi: https://doi.org/10.1007/s12652-020-02490-1
  132. Revanth S, Sanjay S, Sanjay N, Vijayaganth V, "Stroke Prediction using Machine Learning Algorithms", International Journal of Disaster Recovery and Business Continuity Vol. 11 No. 01 (2020): Vol 11 No 1 (2020)
  133. Dr.V.Sakthivel et al., "A COMPARATIVE ANALYSIS OF WEB DEVELOPMENT TOOLS: REACTJS AND VUEJS", Journal of Periodica Polytechnica Electrical Engineering and Computer Science, Vol. 13, No. 3, pp. 3871–3880
  134. Mr.M.Saravanan et al., "Effective Routing Using Q-Learning Algorithm In Vehicular Adhoc Network(Vanet)", International Journal of Future Generation Communication and Networking, Vol. 13, No. 3, pp. 3897–3910
  135. Dr.V.Sakthivel et al., "Wearable Fall Detection system for Elderly People using Iot", International Journal of Future Generation Communication and Networking Vol. 13 No. 3
  136. Sivaramakrishnan Rajendar, P. Barath, V. Havish Kiran, M. Karthik, S. Kumaravel, "The Development of a Lesson Management System for KPRIET based on MVC Architecture", International Journal of Disaster Recovery and Business Continuity, Vol. 11 No. 01
  137. Mr.K.Kamaraj, Mr.C.Arvind,Mr.K.Srihari, "A weight optimized artificial neural network for automated software test oracle", Soft Computing, Doi: https://doi.org/10.1007/s00500-020-05197-9
  138. C S.Madhumathi et al., "Granary monitoring system using IoT", Journal of Critical Reviews (International Journal of Emerging Technologies) JCR 7(12): 1899-1906, doi: 10.31838/jcr.07.12.293
  139. Premkumar Murugiah, Vidhya Kandasamy , Santhosh. R.S, Selvamoorthy, M, Soundararajan A, Vignesh kumar. B, "Artificial Intelligence Based Students Attendance Monitoring System", International Journal of Future Generation Communication and Networking, Vol. 13 No. 3
  140. Dr.Jeyabharathi. J, Veena.G, Shaniba.B, Sree Vidhya.R."Traffic data Prediction in Intelligent Transportation system", Journal of Criticial Reviews, JCR. 7(12): 2150-2156, doi: 10.31838/jcr.07.12.319
  141. S.Srithar, C.Ravindran, S.Prasad, , K.Praveen Kumar, K.Santhosh, "A Continuous Infant Monitoring System Using Iot", International Journal of Future Generation Communication and Networking Vol. 13 No. 3
  142. Vishnu Kumar Kaliappan , C. Madhan Kumar , NL. Mohanraj, M. Pravin, "Secured Intelligent Locker System Using Wireless Sensor Networks", International Journal of Future Generation Communication and Networking, Vol. 13 No. 3
  143. Ms.C.S.Madhumathi et al.,"Auto Braking system with bluetooth control", International Journal of Future Generation Communication and Networking Vol. 13 No. 3
  144. Mr.Kandasamy "Automatic Question Paper Generation Using Bloom’s Taxonomy", International Journal of Future Generation Communication and Networking Vol. 13 No. 3
  145. Vijay. M.N, Vignesh. R.R, Sivaprasath. V, Tamilalakan. S, Indhu. R, "Text Summarization Using Spacy Algorithm", International Journal of Future Generation Communication and Networking, Vol. 13 No. 3
  146. Balaji packiarajan, Gokul gunasekar, Gowtham selvaraj, Mani baarathi rethinakumar, Nitin B. Raut,"Online Shopping Fake Product Review Analysis", International Journal of Future , Vol. 13 No. 3 Generation Communication and Networking, Vol. 13 No. 3
  147. Naveenkumar M, Srithar S, Vijayaganth V, Ramesh kalyan G (2020) "Identifying the Credentials of Agricultural Seeds in Modern Era", International Journal of Advanced Science and Technology, Vol. 29, No. 7s, page. 4458 – 4468
  148. Ms.Indhu R et al., "Emotion based Music Recommendation system using Naive Bayes Classification", International Journal of Future Generation Communication and Networking Vol. 13, No. 3, pp. 1637–1644
  149. Ms.S K Sri Preetha et al., "Real world anamoly object detection from survelliance video using Tensorflow Object Detection Api", Studia Rosenthaliana (Journal for the Study of Research) Volume XII, Issue VI
  150. Sivaramakrishnan Rajendar, Dharani T, Rajasekaran Thangaraj, Gowtham Kumar N, Kavin A, Lavanya M, "Blockchain based Secured Transactions in Rental Applications", International Journal of Future Generation Communication and Networking, Vol. 13 No. 3
  151. Rajasekaran Thangaraj, D. Dinesh, S. Hariharan, Sivaramakrishnan Rajendar, D. Gokul, T.R. Hariskarthi, "Automatic Recognition of Avocado Fruit Diseases using Modified Deep Convolutional Neural Network", International Journal of Grid and Distributed Computing Vol. 13 No. 01
  152. K.S. Agilan, R. Aswathaman, R. Harinisri, M. Salomi, "Abstractive Summarization of Text using Encoder-Decoder Based Architecture", International Journal of Pschycosocial Rehabilitation, Volume 24 - Issue 5
  153. M.Saravanan ,B.Priyadarsini, M.Priyadharshini, M.Sowmiya, N. Sree Brindha, "Smart Icu Patient Observance System In Healthcare", International Journal of Future Generation Communication and Networking, Vol. 13, No. 2, pp.1664-1676
  154. S. Rajapriya, M. Shifa Parveen, S.V. Vasunthra, S. Vinu Bharathi, P. Suresh."An IoT based self propelled irrigation system for agriculture", Journal of Critical Reviews, JCR. 7(8): 2888-2893doi: 10.31838/jcr.07.08.476
  155. S.Raguvaran , R.Anandhi , A.Anbarasi, T.Megala, "Heart Disease Prediction Using Hybrid Machine Learning Algorithms", International Journal of Grid and Distributed Computing Vol. 13 No. 01
  156. Vidhya Kandasamy, Nandha Gopal M, Nawash Basha A, Viknesh B S, Vishnu Kumar M, "Deployment of private cloud for center for research and development", International Journal of Grid and Distributed Computing Vol. 13 No. 01
  157. Ms.M.Salomi et al., "Discovery of Recipes Based on Ingredients using Machine Learning", International Journal of Pschycosocial Rehabilitation, Volume 24 - Issue 8
  158. Dr.N.Prasath et al., "Interpretation of Human Actions from Live Video using Deep Learning Techniques", International Journal of Future Generation Communication and Networking , Vol. 13, No. 3, (2020), pp. 675-683
  159. Dr. J.Jeyabharathi et al., "A Heuristic Search Method Unified in Blockchain Expertise for Supply Chain Management", International Journal of Control and Automation Vol 13 No.4(2020)
  160. Kim, B., Yuvaraj, N., Sri Preethaa, K.R. et al. Enhanced pedestrian detection using optimized deep convolution neural network for smart building surveillance. Soft Comput 24, 17081–17092 (2020). https://doi.org/10.1007/s00500-020-04999-1
  161. Dr.J.Jeyabharathi, S.Asif, Mr.S.Alagumuthukrishnan, "A Novel Constrained based Sequence Pattern Mining for Medical Records", International Journal of advanced science and Technology, Vol 29, 9s (2020) pp.508-516
  162. Mr. K.S. Gautam et al., "An Alternative Frame Selection Approach for motion Detection", International Journal of Advanced Science and Technology Vol. 29 No. 7
  163. A. Mohana Priya, V. Nandhini, S. Pavithira Dharshini, N. Vidhya and R.H. Aswathy, "Geo tracking of waste with triggering alerts and mapping area with High Indexed waste", Journal of Advanced Research in dynamical and control system Volume 12 | 05-Special Issue , Pages: 1026-1033
  164. Mr.Kamaraj K et al., "A WEB APPLICATION DEVELOPMENT FOR INFRASTRUCTURE MANAGEMENT AND SERVICES", Studia Rosenthaliana (Journal for the Study of Research)Volume XII, Issue IV
  165. Vidhya, K., Shanmugalakshmi, R. Deep learning based big medical data analytic model for diabetes complication prediction. J Ambient Intell Human Comput 11, 5691–5702 (2020). https://doi.org/10.1007/s12652-020-01930-2
  166. Srithar, S., Saravanakumar, N.M. An Improved Heterogeneous Motion Prediction Algorithm for Vehicle-to-Vehicle Message Ferrying in VANETs. Wireless Pers Commun 113, 695–714 (2020). https://doi.org/10.1007/s11277-020-07248-8
  167. Ms.K.Vidhya et al., "Student Mood Analyser Using Covolutional Neural Network", Journal of Critical Reviews, 7(11): 2383-2391, doi: 10.31838/jcr.07.19.359
  168. Mr. R. Sivaramakrishnan et al., "Decentralized Voting App Using Ethereum Blockchain", International Journal of Test Engineering and Management
  169. Mr. K Kamaraj et al., "A Web Application Development For Infrastructure Management And Services", Journal for the Study of Research, Vol XII, Issue IV Page no:424-432
  170. Mr. K Kamaraj, "Infrastructure Management And Services - 2", INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, Volume 9 Issue 5
  171. Mr. M. Saravanan et al., "Energy Efficient and Secure Data Transmission using Cooperative Routing Networks", International Journal of Computer Techniques, VOLUME: 11, ISSUE: 012229-6948
  172. Dr. V. Sakthivel e al., "Implementation of Alexa-Based Intelligent Voice Response System for Smart Campus", Innovations in Electrical and Electronics Engineering pp 849-855 https://doi.org/10.1007/978-981-15-2256-7_80
  173. Dr.N.Balaji et al., "Unmanned Arial Vehicle’s Runway Landing System with Efficient Target Detection by Using Morphological Fusion for Military Surveillance System", Journal of Computer Communications Volume 151, 1 Pages 463-472,
  174. S.Srithar et al., "Comfort and Danger Zone Boundary Prediction for Flying Car Safe Overtaking in Highways", International Journal of Recent Technology and Engineering Volume-8 Issue-5

    175. 2019

  175. P.Suresh, R.H.Aswathy, 'An IOT based Innovative Irrigation Model for Smart and Precision Agriculture", Journal of Tierärztliche Praxis, Vol 39, Issue 11
  176. Sathya Balaji et al., "Smart Health Care Prediction for Cardiovascular Disease-A Systematic Review", International Journal of Engineering Research & Technology Vol 8, Issue 11,
  177. Dr.N.Yuvaraj et al., "Artificial Intelligence Model for Earlier Prediction of Cardiac Functionalities Using Multilayer Perceptron ", Journal of Physics Conference Series 1362
  178. Dr.N.Yuvaraj et al., "Intelligent Chatbot Model to Enhance the Emotion Detection in social media using Bi-directional Recurrent Neural Network", Journal of Physics, Conference Series 1362
  179. Dr.N.Yuvaraj et al., "An IoT Based Gradient Descent Approach for Precision Crop Suggestion using MLP", Journal of Physics, Conference Series 1362
  180. M.Naveen kumar, K.Vishnukumar, "Audio based Emotion Detection and Recogniting Tool using Mel Frequency based Cepstral Coefficient", Journal of Physics-Conference series 1362
  181. Dr.N.Yuvaraj e al., "Earlier Prediction of Cardiovascular Disease Using IoT and deep learning approaches", Advances in Ubiquitous Sensing Applications for Health Care - Elsevier
  182. T.Rajasekaran T,Vishnukumar K,Raguvaran S,Kandasamy, "Recognition of Animal Species on Camera Trap Images using Machine Learning and Deep Learning Models", International Journal of Scientific & Technology Research Vol 8, Issue 10
  183. V.Sakthivel et al., "HACRP: A Resource Monitoring and Provisioning Framework for Cloud Applications", Applied Mathematics & Information Sciences 13, No.S1,139-148
  184. Sivaramakrishnan R,Vishnu Kumar K "Intelligent Transportation Cyber-Physical System: On Crowd through Event Detection for Public Urban Transportation", International Journal of Recent Technology and Engineering Vol 8, Issue-2S11
  185. Priyadharshini M et al., "Amplification of Availability in Web Services by Earlier Detection of False Requests during Service-Oriented Application Development", Applied Mathematics & Information Sciences 13, No.S1,165-171
  186. Muthukrishnan, P., Sakthivel, V., Ramachandran, B. et al. Technical analysis on security realization in web services for e-business management. Inf Syst E-Bus Manage 18, 427–438 (2020). https://doi.org/10.1007/s10257-019-00423-w
  187. Ms.K.Vidhya et al.,"Improved Diabetic Data Analytics Model for Complication Prediction", International Journal of Engineering and Advanced Technology Volume – 8 Issue 6S, pp 224-230
  188. R.Divya et al., "Survey on breast cancer detection using neural networks", International Research Journal of Engineering and Technology Volume 6, Issue 3
  189. Mr.V.Sakthivel et al., "Integrated Platform and response system for healthcare using Alexa", International Journal of Advance Research, Ideas and Innovations in Technology vol.5, no.1,pp. 295 -301
  190. R.Divya et al., "Security attacks and detection in cloud using machine learning algorithms", International Research Journal of Engineering and Technology Volume 6, Issue 2,
  191. Ms.A.Padmashree et al., "Survey on clustering attacker activities in IoT data through machine learning techniques", International Journal of Advance Research, Ideas and Innovations in Technology vol.5, no.1,pp. 355 -359
  192. Dr.N.Yuvaraj, "Enhancing the accuracy of digit recognition using machine learning algorithms", International Journal of Advance Research, Ideas and Innovations in Technology vol.5, no.1,pp. 289 -294
  193. Dr.N.Yuvaraj "Identification of Phishing Website using Deep Learning Algorithm", International Research Journal of Engineering and Technology vol.6, no.1
  194. Dr.N.Yuvaraj "Predicting Housing Prices using advanced regression techniques" International Journal of Advance Research, Ideas and Innovations in Technology vol.5, no.1,pp. 370 -374
  195. Ms.G.Jenifa "Ensure the securities in IoT for home monitoring system", International Journal of Advance Research, Ideas and Innovations in Technology vol.5, no.1,pp. 330 -332
  196. Ms.G.Jenifa "Providing Data Integrity in toll booth management system" International Journal of Advance Research, Ideas and Innovations in Technology vol.5, no.1,pp. 347 -350
  197. Ms.R.H.Aswathy "Detection of online spread of terrrorism using web data mining", International Journal of Advance Research, Ideas and Innovations in Technology vol.5, no.1,pp. 342 -346
  198. Dr.N.Prasath et al., "E-voting system using Blockchain", International Research Journal of Engineering and Technology vol.6, no.1,pp. 1714 -1718
  199. Ms.C.S.Madhumathi et al., "Secure Health Care Data using Blockchain - A Survey", International Research Journal of Engineering and Technology vol.6, no.1,pp. 1667 -1671
  200. Dr.N.Prasath et al., "A Secure Cloud Based Food Supply Chain Traceability Provenance Using Blockchain", International Research Journal of Engineering and Technology vol.6, no.1,pp. 1714 -1718
  201. M.Salomi " An intelligent biogdata flavor space recipe-A survey" International Research Journal of Engineering and Technology Volume 6, Issue 1

    202. 2018

  202. Dr.K.Vishnu Kumar "Tweet Analysis Based on Distinct Opinion of Social Media Users" Advances in Big Data and Cloud Computing December 2018
  203. Dr.N.Yuvaraj "Social Interaction and Stress-Based Recommendations for Elderly Healthcare Support System - A Survey" Advances in Big Data and Cloud Computing - Springer
  204. Dr.M.Priyadharshini, Mr.V.Sakthivel "Querying Scalable and Redundant Data via. Recursive Queries in Orm Systems", Journal of Engineering and Applied Sciences
  205. Ms.A.Padmashree, Dr.N.Prasath "Enabling Data Storage on Fog - An attempt towards IoT", Lecture Notes on Data Engineering and Communicaion Technologies
  206. Ram Sundar G et al., "QR Code Based Shopping with Secure Checkout for Smartphones",Journal of Computational and Theoretical Nanoscience Vol. 15, 1–6, May 2018
  207. Sakthivel V et al., "Energy Conserving Resource Allocation and Job Scheduling Using Cloudsim Simulator", International Journal of Science and Innovative Engineering & Technology Vol 2
  208. Suresh P "Conclave of Internet of Things for Smart Applications: A Concise Review" International Journal of Engineering and Technology 7(2.19) April 2018
  209. Joyce Beryl Princess P et al., "Tri - Chrominance Texture Pattern : A New Feature Descriptor", International Journal of Engineering and Technology 7(2.22), PP.15-20, April 2018
  210. Karthic S et al., "A Survey on Location Based Routing Strategies for Wireless Sensor networks", International journal of Pure and Applied Mathematics Volume 118, No.20 , 2018,1314-3395(online), March 2018
  211. S.Hemanandhini, R.Indhu , Akila M " Foreground Object Segmentation from video sequences using speeded-up robust feature",International journal of Pure and Applied Mathematics Volume 118, No.20 , 2018,1314-3395(online), March 2018
  212. Yuvaraj N "A survey on sensors & communication technology in Iot for Smart Crop Cultivation using Machine Learning Algorithms", International Journal for Scientific Research & Development (IJSRD) Vol 6, Issue 01,2321-0613 (Online)
  213. Yuvaraj N "Healthcare Access: A survey on IoT and Machine Learning Algorithms for effective heart rate detection" International Journal for Scientific Research & Development (IJSRD) Vol 6, Issue 01, 2321
  214. Yuvaraj N "An extensive survey on IoT Architecture & Machine Learning algorithms for crowd detection in public transportation" International Journal for Scientific Research & Development (IJSRD) Vol 6, Issue 01, 2321
  215. Yuvaraj N "Issues and Challenges in Wireless Sensor Security : A Survey",International Journal for Scientific Research & Development (IJSRD) Vol 6, Issue 01, 2321
  216. Joyce Beryl Princess P et al., "Methods to mitigate attacks during Live migration of virtual machines- A survey", International journal of Pure and Applied Mathematics Volume 118, No.20 , 1314-3395(online), March 2018
  217. N. Prasath, J. Sreemathy "Optimized dynamic source routing protocol for MANETs", Journal of Culster Computing, Special issue 5

    218. 2017

  218. Yuvaraj N ,K.R.Sri Preethaa "Diabetes prediction in Healthcare systems using machine learning algorithms on Hadoop Cluster" The Journal of networks, Software tools and applications – Springer pp.1386-7857,ISSN: 136-7857
  219. Aswathy R H,P.Suresh Dr.M.Akila "The Performance Evaluation of Transport Layer Protocol in Constrained Environment of IoT" International Journal of Civil Engineering and Technology (Scopus Indexed) Volume 8, Issue 12, pp.243-258, ISSN: 0976-6316
  220. Sakthivel V et al., "A Survey on Cloud Performance monitoring using Virtual Machine", International journal of Pure and Applied Mathematics Volume 116, No.23, Nov 2017
  221. Yuvaraj N "ANFIS based crop yield prediction model" International Journal of Science, Engineering and Technology Research Volume 06, Issue 05, ISSN: 2278 -7798
  222. Sri Preethaa K R "Multilevel Data Security Protection Mechanism for Cloud Storage System" Volume 06, Issue 05, ISSN: 2278- 7798
  223. Yuvaraj N "An Effective Threshold Selection Algorithm for Image Segmentation of Leaf Disease Using Digital Image Processing" International Journal of Science, Engineering and Technology Research Volume 06, Issue 05, ISSN: 2278 -7798
  224. Yuvaraj N " Performance Analysis of different Text classification Algorithms" International Journal of Scientific & Engineering Research vol.8, no.5, pp. 18- 22
  225. Yuvaraj N " Effective On-Page Optimization for Better Ranking" International Journal of Computer Science and Information Technologies vol. 8, no.02, pp. 266-270

    226. 2016

  226. Yuvaraj N "A survey on crop yield prediction models" International Journal of Innovations and Developments Volume 05, Issue 12, ISSN: 2277 -5390
  227. Dr.N.Prasath et al., "Artificial Fish Swarm Algorithm Dynamic Source Routing Protocol for MANET", IIOAB Journal AFSA DSR ISSN: 0976-3104, vol. 7, no. 6, pp. 1–63, Aug 2016
  228. Sri Preethaa K R "Visualizing Social Network: A Survey" International journal of Advances in Natural and Applied sciences Vol 10, issue 10, pages 8-17
  229. Joyce Beryl Princess P et al., "Manipulation of image Segmentation Using Cleverness Artificial Bee Colony Approach", International Journal of Computer, Electrical, Automation, Control and Information Engineering, Vol 10, Issue 3,June 2016
  230. N.Yuvaraj "Engine Optimization for Effective Ranking of Educational Website",Middle-East journal of scientific Research 24(Techniques and algorithms in Emerging Techniques) pp.65-71
  231. N.Yuvaraj "Best Customer Services among the E-Commerce Websites- A Predictive Analysis" International Journal of Engineering and Computer Science Vol.5, Issue 6

    2022

  1. Bernard Rayappa, A., and T. V. P. Sundararajan. "Design of ACS Architecture Using FinFET and CNTFET Devices for Low-Power Viterbi Decoder Using Asynchronous Techniques for Digital Communication Systems." Journal of Circuits, Systems, and Computers (2022). https://doi.org/10.1142/S0218126622500803.
  2. Parameshwaran Ramalingam, Abolfazl Mehbodniya, Julian L. Webber, Mohammad Shabaz, Lakshminarayanan Gopalakrishnan, "Telemetry Data Compression Algorithm Using Balanced Recurrent Neural Network and Deep Learning", Computational Intelligence and Neuroscience, vol. 2022,2022. https://doi.org/10.1155/2022/4886586.
  3. Nithya S, Seethalakshmi V, "MIMO Antenna with Isolation Enrichment for 5G Mobile Information", Mobile Information systems, vol2022, 14 pages, 2022. https://doi.org/10.1155/2022/1802352.
  4. Saravanan, K., Tamilselvan, G. M., Rajendran, A. (2022). Cross Layer QoS Aware Scheduling based on Loss-Based Proportional Fairness with Multihop CRN. Computer Systems Science and Engineering, 42(3), 1063–1077. Vol.42, No.3, 2022, pp.1063-1077, doi:10.32604/csse.2022.020789.

    5. 2021

  5. J. Muralidharan, R.Muthukumaran, M.Ranjith Kumar, M. Rubika. “Smart Shopping Trolley System using IoT.” Journal of Physics: Conference Series 1973, (2021): 1-7.
  6. J.Muralidharan, S.Saran, G.Tamilkavi, S.Thivakar, M. Vivin. “An Automatic Fluid Filling Mechanism Using Delta PLC.” Journal of Physics: Conference Series 1973, (2021): 1-07.
  7. S.Miruthula, NA Logeshwari, VN Manickaraj, M.Praveen, Dr.G.Dhivyasri. “A Review on Unmanned Crop Detection Techniques.” Journal of Physics: Conference Series 1969, no: 012028 (2021): 1-8.
  8. S.Keerthana, B.Kiruthika, R.Lokeshvaran, B.Midhunchakkaravarthi, G.Dhivyasri. “A Review on Smart Waste Collection and Disposal System.” Journal of Physics: Conference Series 1969, no: 12029 (2021).
  9. T.Jagadesh, V. Remya, B.Jaishankar, K.Murugan. “Analysis of static power reduction techniques in shift registers.” Lecture Notes in Mechanical Engineering – Springer, (2021):567-578.
  10. M.D.Pradeep, S.M.Ramesh, B.Gomathy. “An Optimized PV based Plug-in Hybrid Electric Vehicle Charging Station Using Fuzzy-PI Controller Logic.” Studies in Informatics and Control 30, no: 2 (2021): 55-66.
  11. Raja krishnamoorthy, D.Venugopal, M.Sujatha, Sudhakar Sengan, C.Bharatiraja, T.Jayasankar. “Hardware design of real valued NSCT transform for biomedical video compression.” Elsevier Materials Today Proceedings 45, no: P2 (2021): 2192-2197.
  12. B. Jaishankar, Santosh Vishwakarma, Prakash Mohan, Aditya Kumar Singh Pundir, Ibrahim Pateland N. Arulkumar. “Block chain for Securing Healthcare Data Using Squirrel Search Optimization Algorithm.” Intelligent Automation & Soft Computing 32, no: 3 (2021).
  13. V. Thanikachalam, S. Shanthi,K. Kalirajan, Sayed Abdel-Khalek,Mohamed Omri and Lotfi M. Ladhar. “Intelligent Deep Learning Based Disease Diagnosis Using Biomedical Tongue Images.” Computers, Materials & Continua 70, no: 3 (2021).
  14. S.Kirubakaran, C.Kamalanathan, S.Karthick Raja. “Single Phase Energy Management System (EMS) using IoT.” IEEE Xplore, (2021).
  15. J.Muralidharan, E.Srinivas, Francis H. Shajin, P.Rajesh. “On Reducing Test Data Volume for Circular Scan Architecture Using Modified Shuffled Shepherd Optimization.” Journal of Electronic Testing, (2021).
  16. D.Ram Nivas, S.Satheesh Kumar, D.Ganeshkumar. “Design and Implementation of Hands-Free Electronic Sanitizer Dispenser.” Conference 2021 Smart Technologies Communication & Robotics, (2021).
  17. S.Satheesh kumar, Shiyam Prasad, M.Durai selvi, S.Vinith kumar. “Smart Eco-friendly wellness monitor for new normal.” IEEE Xplore, (2021).
  18. J. Haritha R. S. Valarmathi, M. Kalamani. “Soil Urea Analysis Using Mid-Infrared Spectroscopy and Machine Learning.” Intelligent Automation & Soft Computing 32, no: 3 (2021).
  19. S.Mythili, K.Nithya, M.Kalamani , M.Krishnamoorthi. “Predictive Analytics for Improving Physician Insights in Health Informatics.” Conference 2021 Smart Technologies, Communication & Robotics, (2021).
  20. T. Venkatesh, Rekha Chakravarthi. “HGRP: Optimal Neighborhood Discovery in IOT Applications.” Wireless Personal Communications, (2021).
  21. R.Gomathi, D.Sharmila. “Application of Harmony Search Algorithm to Optimize SPARQL Protocol and Resource Description Framework Query Language Queries in Healthcare Data.” Journal of Medical Imaging and Health Informatics 11, no: 11 (2021).
  22. Parameshwaran Ramalingam, Abolfazl Mehbodniya, Julian L. Webber, Mohammad Shabaz and Lakshminarayanan Gopalakrishnan. “Telemetry Data Compression Algorithm Using BalancedRecurrent Neural Network and Deep Learning.” Hindawi Computational Intelligence and Neuroscience 2022.
  23. Bernard Rayappa, TVP Sundararajan. “Design of ACS Architecture Using FinFET and CNTFET Devices for Low-Power Viterbi Decoder Using Asynchronous Techniques for Digital Communication Systems.” Journal of Circuits, Systems and Computers, (2021).
  24. R.Rajalakshmi, S.M.Ramesh, P.Sivakumar, “Improved result of TSV and Slew aware 3D Gated Clock Tree Synthesis using charge recycling configuration”. 3C Tecnología. Glosas de innovación aplicadas a la pyme, Edición Especial, (2021), 667-687. https://doi.org/10.17993/3ctecno.2021.
  25. Suganyadevi, S., V. Seethalakshmi, and K. Balasamy. "A review on deep learning in medical image analysis." International Journal of Multimedia Information Retrieval (2021): 1-20.
  26. Senthilkumar, C., K. Gayathri Devi, K. S. Tamilselvan, and Rajeshwari Hegde. "ANN based Detection and Diagnosis of Neurological Disorder Diseases." Design Engineering (2021): 1111-1119
  27. V.Seethalakshmi, J.Ramprasath, "Improved Network Monitoring Using Software-Defined Networking for DDoS Detection and Mitigation Evaluation"",Wireless Personal Communications Springer, Jan 2021.
  28. N.Rajesh Kumar, K.Siddharthraju, R.Nandakumar, R.P.Meenaakshisundhari, M.Nisha Angeline, P.Vijayakumar, "An Improved Two-Way Secure Key Supervision (TSKS) Scheme for Secure SCADA", Materials Today: Proceedings, Jan 2021.
  29. S.P.Cowsigan, D.Saraswady, "Substrate integrated waveguide cavity backed antenna for IoT applications",Journal of Ambient Intelligence and Humanized Computing, Vol.12, Feb 2021.

    30. 2020

  30. Jakir Hussain G K , Alexpandiyan, Geethapriyan and Navaneethan, "Distributed Cryptographic system for Wireless Networks”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  31. K.Siddharthraju, K.Sabarish, A.Sidharth and R.Sanjaykumar, "A survey on IOT and cloud data security”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  32. Nithya. S, Guru Sabari. S, Navin. K.S and Gowseha. K, "A smart centralised digital medical record system”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  33. K. Kalirajan, M Sabarinathan, B Sundareshan and R Ranjith Kumar, "Digital Autonomous Maintenance System for Efficient Monitoring and Inspection of Machinery Functionalities in Industries”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  34. Singaram M, Renuka S, Vithiya S K and Subathra B, "Design of Frequency Selective Surface for WLAN, C-Band and X-Band Filtering Mechanism”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  35. N. Rajesh Kumar, Divyashree.R, Archana.B.S and Dhevadarshini.A.R, "Technology innovation for vendors using IoT”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  36. T. Shanmugaraja, R. Dharani , G.P. JananePreya , S. Madhan Karthik and K.Murugan, "Architectural Optimization Modified FIR Filter”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  37. Singaram, Vaishnavi and Pavithra, "3D Reconfigurable frequency selective surface”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  38. Chandra Prasad V, Kishor M, Jeevitha Eswaran, Mohamed Riyaz M, Naveen Chandar M and Deepika S, "Compact Broadband Antenna for Wi-Fi Applications”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  39. Chandra Prasad V, Kishor M, Jeevitha Eswaran, Mohamed Riyaz M, Naveen Chandar M and Deepika S, "Compact Broadband Antenna for Wi-Fi Applications”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  40. Finney Daniel S, Santhosh K K, Tamil Selvan R, Uthaya Kumar M and Jaya Vignesh P, "Defect Detection in Fabrics using Modified CNN”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  41. Venugopal D, Sundara Subramanian V J, Sabareeswaran B, Partha Sarathi S and Vijayachandaran P, "A Secured IoT Based Encryption Algorithm for Colour Medical Images”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  42. Chandra Prasad V, Asvitha R, Jeevitha Eswaramoorthi, Gokula Priya S and Janani K, "Narrowband Antenna for GSM Applications with High Directivity”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  43. Jakir Hussain, Arvinth, Ajithkumar and Koorimugesh, "Design and Analysis of Automatic Washroom Cleaning Machine”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  44. Saravanan, Ganesh and Moniesh, "Self Defense System for Women Safety with Location Tracking and SMS Alerting”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  45. Shanmugaraja T, Murugan K, Kavin Raj and Nandhini, "Receptionist Robot Using Raspberry Pi and Arduino”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  46. Venugopal. D, Sharguru. R, Ranjith Kumar. N, Revanth. S.A and Ranjith. A, "Block based compression of color medical images using neural networks”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  47. N.Rajesh Kumar, Sundhar P, SelvaKumar V and Surya S. A, "SVM classifier based crop disease detection”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  48. Shanmugaraja T, Murugan, Bharathi Raja,Elavarasan and Mohan Kumar, "Motorcycle theft avoidance using an fingerprint and number-lock system”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  49. Finney Daniel Shadrach, Shirley Stevany Faryl A, Vinothini S and Pragadeeshwari D, "Pretrained Deep Learning Model for Music Genre Classification”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  50. N.Rajesh Kumar, Sundhar P, SelvaKumar V and Surya S. A, "SVM classifier based crop disease detection”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  51. Singaram M, Finney Daniel Shadrach S, Roshini P, Sandhiya P and Sandhiya S, "A novel compact frequency selective Surface using k and ka band for Satellite applications”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  52. D.Sudarvizhi, Nithiya Selvi B and Sarikaa T, "Foot ulcer recognition and wound healing Analysis using image segmentation and Morphological operations”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  53. D.Sudarvizhi, Deebak P, Gowtham D and Meivel S, "Wireless smart insole using combinational sensors for foot-ulcer detection and pressure distribution”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  54. D Cowsigan.S.P, Saraswady.D, Sri Sowbharanya.K.S, Priya Dharshini.V and Pravin Raj.K.S, "Design, Development and Interpretation of FMSIW and HMSIW for K and Ka Band Applications”, International Journal of Engineering and Advanced Technology (IJEAT), Vol.9, Issue.5, June 2020
  55. Sathishkumar N, Arthika S, Indhu G and Elakkiya K, "Design and Study of Rectangular Micro strip Patch Antenna for WLAN Applications”, International Journal of Advanced Science and Technology, Vol.29, Issue.7, June 2020
  56. Sathishkumar N, Meena D, Kasthuri S and Saveri Mettilda X, "Design and study of frequency reconfigurable antenna for WiMAX / WLAN /Wi-Fi Applications”, International Journal of Advanced Science and Technology, Vol.29, Issue.7, June 2020
  57. V. Chandraprasad, S. Abinaya, S. Archana and S.Sona, "Body Measurement System Using Kinect Sensor”, Journal of Advance Research in Dynamical & Control Systems, Vol.12, Issue.7, August 2020
  58. S.Kirubakaran, K.Saravanan and N.Rajeshkumar, "Design of Discrete Cosine Transform Using Vedic Mathematics”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  59. S.Kirubakaran, K.Siddharthraju, B.Jaishankar, K.Murugan, M.Supriya and S.Sophia , "An Improved load-balancing task allocation scheme for MCS systems”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  60. Reethika A, Bharath.V, Rajeshwari Rengarajan, Allwyn Ganadass A and Alavanthar T, "Identification of spread and type of skin cancer using boundary tracing, support vector machine and minimum distance classifier”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  61. K.Saravanan, S.Kirubakaran and N.Rajeshkumar, "Data Replication Updation for Distributed Data Service in Cloud Computing”, Waffen-und kostumkunde Journal, Vol.11, Issue.6, June 2020
  62. J.Muralidharan, Anand Anbalagan, K.Arun and P.Karthikeyan, "Area efficient design of a redundant binary multiplier Using modified partial product generator and Compressors”, Journal Of Critical Reviews, Vol.7, Issue.13, July 2020
  63. J.Muralidharan, Ravikumar, SriVidya and P.Karthikeyan, "A Novel and Efficient Design of Conflict Free Memory Address Schemes”, Journal Of Critical Reviews, Vol.7, Issue.13, July 2020
  64. J.Muralidharan, R.Dhanagopal, Pankaj Kumar, "Design of High Performance and Functional Verification of Dsp Board Using Vlsi Architecture”, Journal Of Critical Reviews, Vol.7, Issue.4, August 2020
  65. Seethalakshmi V, Nithya S, Aswatha R, Gunanandhini S, Kayathiridevi K, Sumathi K” Performance Analysis and Simulation of Microstrip patch antenna using CST Studio for Wi-Fi applications”, Waffen-und kostumkunde Journal, Vol.09,no.8, August 2020.
  66. Manikandan M, Dhivyasri G, Chandran V, Nirmal D, Prajoon P” Luminous power improvement in InGaN V-Shaped Quantum Well LED using CSG on SiC Substrate”, IOP Conference Series: Materials Science and Engineering, August 2020.
  67. K. Kalirajan, R.Jamuna,G. Shanthi, L.Raja,G. Harikrishnan,” Edge Detection Based Feature Extraction for Intelligent Car Parking System”, Waffen-und kostumkunde Journal, Vol.09,no.8, August 2020.
  68. Mr.S.Satheesh Kumar, R. Sowmya, Dr.B. Maruthi Shankar, N. Lingaraj, Dr.S.A. Sivakumar,”Analysis of Connected Word Recognition systems using Levenberg Marquardt Algorithm for cockpit control in unmanned aircrafts” ,Elsevier-Materials today Proceedings, August 2020.
  69. Kathirvelu M, Rajendran A, "Design of High Performance Binary Circuits for Low Power Applications”, Bioscience Biotechnology Research Communications, Vol.13,no.6, August 2020.
  70. S.Kirubakaran, K.Saravanan, C.Kamalanathan, R.Gowrishankar, Senthilkumar.J,” Tree Based Routing Algorithm for Zigbee Wireless Networks”, Journal Of Critical Reviews, Vol.7, no.7, August 2020
  71. M.Supriya, R.Dhivyadevi,T. Shanmugaraja, R. Siddharthraju, K.Murugan, T.Venkatesh, B. Jai Shankar, "Multi-Ported Memory on FPGA For A High Performance FIR Filters", International Journal of Advanced Science and Technology, vol. 29, no. 7 July 2020
  72. T.Venkatesh, T. Shanmugaraja, R.Dhivyadevi, M. Supriya, A.Maheshwari, "A Perspective approaches of Clustering in Wireless Sensor Networks Survey", International Journal of Advanced Science and Technology, vol. 29, no. 7 July 2020
  73. T.Shanmugaraja,B. Jai Shankar,K. Siddharthraju, K.Murugan, T. Venkatesh, R.Dhivyadevi, M.Supriya,"Parametric Optimization of Architectural Modified FIR Filter", International Journal of Advanced Science and Technology, vol. 29, no. 7 July 2020
  74. K. Murugan,Finney Daniel Shadrach, R. Anitha, B. Jai Shankar,"Facial Emotion Recognition using Swarm optimization Technique", International Journal of Advanced Science and Technology, vol. 29, no. 7 July 2020
  75. S.Satheesh Kumar, D.Selvakumar N. Jeeva J.S.Sujin S.P.Karthi, " Hand Gesture Control Robot for Fire Detection and Prevention",International Journal of Future Generation Communication and Networking,Vol.13, no.4, Sep 2020.
  76. Nithya S, Seethalakshmi V, Gunanandhini S, Saranya G, "Design of High Gain Microstrip Patch Antenna for 5G Communication using CST", National Taiwan University of Science and Technology, Vol.35, no.3 Sep 2020
  77. T.Jagadesh, K.Balamurugan, S.Vivekanandan, C.J.Vignesh V.Kamalkumar," Hand Gesture Control Robot for Fire Detection and Prevention",International Journal of Future Generation Communication and Networking,Vol.13, no.4, Oct 2020.
  78. R Sowmya, J.Rejina Parvina, S. Gokul Kumar, A. Elakya, K. Priyadharsini, "Nickel material based battery life and vehicle safety management system for automobiles", Elsevier-Materials today Proceedings, Oct 2020
  79. S. Chandraprabha, C.Dinesh,A. Mohamed Ibrahim G.Saravanan," LSTM Model Based Wind Speed Forecasting",International Journal of Future Generation Communication and Networking,Vol.13, no.4, Oct 2020.
  80. Ramesh Muthiya, Dinesh Elangovan, "Design and Implementation of Crypt Analysis of Cloud Data Intrusion Management System",The International Arab Journal of Information Technology, Vol.17, no.6, Nov 2020.
  81. V.Seethalakshmi, J.Ramprasath, "Secure Accessof Resources in Software-defined Networks using Dynamic Access Control List",International Journal of Communication System, Nov 2020.
  82. M.Manikandan, G.Dhivyasri, D.Nirmal, J.Ajayan, L.Arivazhagan, P.Prajoon, "Numerical Investigation of Traps ans Optical Response in III-V Nitride Quantum LED",Optical and Quantum Electronics, Nov 2020.
  83. S.Kirubhakaran, Karthickraja R, Kumar R, Jegan Antony Marcilin L, Manikandan R, "COVID-19 prediction and symptom analysis using wearable sensors and IoT",International Journal of Pervasive Computing and Communications © Emerald Publishing Limited, Nov 2020.
  84. G.Pradeepkumar, M.D.SaranyaK, Tamilselvan, Jhanani Shree U, Mazher Iqbal J L, S. Kavitha, "Investigation on Watermarking Algorithm for Secure Transaction of Electronic Patient Record by Hybrid Transform", International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud) (I-SMAC), Dec 2020.
  85. Mr.S.Satheesh Kumar, N. Nanthini, B.Maruthi Shankar, R.Senthil Ganesh, "Deep Learning approach for Minimizing Disease Spread using Face Identification and Contact Tracing", International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud) (I-SMAC), Dec 2020.

    86. 2019

  86. M.G.Sumithra, Particle Swarm Optimization (PSO) with fuzzy means (PSO-FCM)–based segmentation and machine learning classifier for leaf diseases prediction, Concurrency and Computation- Practice and Experience, Special Issue/ pp. 1-13, 2019.
  87. C.Karthikeyini, Analysis and Identification of Macronutrients of Leaf, International journal of Innovative Research in Science, Engineering and Technology, Vol. 8, No. 03, pp. 22251-22260, 2019.
  88. C.Karthikeyini, Smart Pressure Ulcer avoidance system based on Braden scale International journal of Innovative Research in Science, Engineering and Technology, Vol. 8, No. 03, pp.2540-2543, 2019.
  89. M.G.Sumithra, An intensity factorized thresholding based segmentation technique with gradient discrete wavelet fusion for diagnosing stroke and tumor in brain MRI, Multidimensional Systems and Signal Processing, Vol.1, no.13, pp. 0923-6082, 2019.
  90. V.Seethalakshmi, Development of Amphibious drone for flood and forest rescue, International Journal of Innovative, Research in Science, Engineering and Technology, Vol. 8, Issue 03, 2019.
  91. S.Nithya, Energy Efficient spectrum analysis using Cognitive radio technology, International Research Journal of Engineering and Technology, Vol. 6 Issue 3, March 2019.
  92. S.Nithya, Real time vision system for thread counting in woven fabric, International Research Journal of Engineering and Technology, Vol.6 No. 3 pp.7973-7975, March 2019.
  93. G.K Jakir Hussain, Deployment of AI Powered Drones for City Surveillance and Monitoring, International Research Journal of Engineering and Technology, Vol. 6, No. 3, March 2019.
  94. G.K Jakir Hussain, E-Parking Reservation System Based on IoT for Smart Cities, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 8, No.3, March 2019
  95. M.Santhanaraj, Higher Order Low Pass FIR Filter Design Using IPSO Algorithm, International Journal of Trend in Scientific Research and Development, Vol. 3, No.3, March 2019.
  96. M.Santhanaraj, Vehicle Security System using Raspberry Pi, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 8, No.3, 2019.
  97. K.Kalirajan, IoT based Smart Energy Monitoring and Controlling, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 8, no.3, pp. 2594-2599, March 2019.
  98. N.Rajesh Kumar, Smart crop field monitoring and automation irrigation system using IoT, International Research Journal of Engineering and Technology, Volume 6, Issue 2, March 2019.
  99. V.Seethalakshmi, Design and analysis of wideband antenna for 5G wireless communication, International Journal of Innovative Research in Science, Engineering, and Technology, Vol. 8, Issue 03, 2019.
  100. D.Sudarvizhi, Identification and analysis of foot ulceration using load cell technique, International research journal of engineering and technology Vol. 6, No. 3, March 2019.
  101. R.Dhivya Devi, Data transfer through human body using red tacton, International journal of advanced research in electrical, Electronics and Instrumentation engineering, Vol. 8, No.1, Jan 2019.
  102. D.Sudarvizhi, Approaches for detection and analysis of wound ulcer using image processing technique, International research journal of engineering and technology, Vol. 6, No. 3, March 2019.
  103. S.P.Cowsigan, Enhancing survival during fire accidents using Quad copter, International Journal of Trend in Scientific Research and Development , Vol. 3, No.3,March 2019.
  104. R.Aswatha, High performance partial product binary to decimal converter based multiplier, International Journal for Science and advance research in Technology, Vol. 5, No. 3, pp. 932-934, March 2019.
  105. R.Mohanabarathy, Real time monitoring of water Quality, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 8, No.3, March 2019.
  106. M.Singaram, Dorsal Hand Vein Authentication System, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 8, No. 3, March 2019.
  107. V.Chandraprasad, Detection and intimation of human presence using UAV (Drones), International Journal of Trend in Scientific Research and Development, Vol. 3, No. 3, March 2019
  108. S.P.Cowsigan, Automatic Intensity Controller and Helmet Detection Using PIC Microcontroller, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 8, No.3, March 2019.

    109. 2018

  109. V. Seethalakshmi, "Gesture Based Message Teller for Disabled Person via Voice and GSM” IJSRD - International Journal for Scientific Research & Development, Jan 2018, Vol.6 (01), pp. 98-102.
  110. D. Sudarvizhi, "IoT Enabled Foot Pressure Monitoring and Analysis,” International Journal for Research and Development in Technology 2018, vol.2 (9), ISSN: 2349-3585.
  111. S.Nithya, "A new high speed wide fan in carry look ahead adder design using Manchester carry chain”, International research journal of engineering and technology (IRJET), June 2018, vol.5 (1), ISSN: 2395-0072
  112. S.Nithya, "An Optimized Approach for deaf and dumb people using air writing” International research journal of engineering and technology (IRJET), June 2018, vol.5 (1) ISSN: 2395-007
  113. R.Aswatha, "Home Automation using Light Fidelity Technique” International research journal of engineering and technology (IRJET), June 2018, vol.5 (3), pp. 60-65, ISSN: 2395-0072
  114. B.Jaishankar, "Design of area efficient fault tolerant parallel FFTS using partial summation and parallel correction”, International Journal of Intellectual Advancements and Research in Engineering Computations, June 2018, vol.6 (1), pp. 89-95, ISSN: 2348-2079.
  115. B.Jaishankar, "Amphibot for Sewage Monitoring System”, IJSRD - International Journal for Scientific Research & Development, 2018, vol.6 (2), pp. 56-60, ISSN: 2321 0613.
  116. R.Mohanabarathy, "Real time outdoor safety management based on embedded systems” IJSRD -International Journal for Scientific Research & Development”, June 2018, vol.6 (1), ISSN: 2321 0613.
  117. G. K. Jakir Hussain, "Lung pattern classification for interstitial lung diseases using a ANN-BACK propagation network”, International journal of research and development in technology, April 2018, Vol.9 (4), pp. 256-260.
  118. G. K. Jakir Hussain, "Rain drop removing by using image smoothing and morphological process”, International journal of research and development in technology, April 2018, Vol.9 (4), pp. 101-106.
  119. M.Santhanaraj, "Brain tumor detection using K-SVD denoising and fuzzy c means clustering” IJSRD -International Journal for Scientific Research & Development, March 2018, Vol. 6(02), 2321-0613.
  120. M.Santhanaraj, "Image De-noising using K-SVD and Guided filtering”, IJSRD - International Journal for Scientific Research & Development”, March 2018, Vol.6 (02), pp. 66-70.
  121. B.Jaishankar, "Design of low complexity fault tolerant parallel FFTs using partial summation and parallel correction”, International Journal of Pure and Applied Mathematics, March 2018, Vol.118 (20), pp. 767-771.
  122. D.Sudarvizhi, "Pedobarography insoles with wireless data transmission”, International research journal of engineering and technology, Jan2018, Vol.5 (1), pp. 283-286.

    123. 2017

  123. N.Rajesh Kumar, "BRAM-Based Multipored Memory Designs on FPGA”, International Journal of Advanced Research in Computer and Communication, November 2017, Vol. 6 (11), pp. 92-96.
  124. R.Mohanabarathy, "Real time echo cancellation in traced audio signal using embedded system”, International journal of advanced research methodology in engineering and technology, December 2017, Vol.1 (3), pp. 65-69. ISSN 2456-6446.
  125. V. Seethalakshmi, "Increasing randomness using DCM-based tunable True Random Number Generator”, IJARCCE-International Journal of Advanced Research in Computer and Communication Engineering, November 2017, Vol.6 (11), pp. 569-574.
  126. Karthikeyini.C, "Built-in Self-test based on Bit swapping and Cell Ordering using Low Power Scan Method”, International Journal of Advanced Research in Computer and Communication Engineering, November 2017, Vol.6, (11), pp. 97-101.

    127. 2016

  127. Dr.K.Bommanna Raja, Ms.Malliga.L, A Novel Content Based Medical Image Retrieval Technique with Aid of Modified Fuzzy C-Means Clustering (CBMIR-MFCM), Journal of Medical Imaging and Health Informatics, vol.6, no 3, pp.700-709, 2016.
  128. Dr.K.Bommanna Raja, Mr.P.Suresh, Functional Mribold interpretation of Brain functions using independent component analysis, Asian Journal of Information technology, vol.15 (10), pp. 1607-1620, 2016.
  129. Dr.K.Bommanna Raja, Ms.Nirmala Jaganathan, Analysis of Deaf Speakers Speech Signal for Understanding the Acoustic Characteristics by Territory Specific Utterances, Circuits and Systems, issue 7, pp.1709-1721,2016.
  130. Dr.K.Bommanna Raja, Mr.Ravindra Kumar Selvaraj, A Multi stage Adaptive Singular value decomposition Approach for Fetal ECG signal extraction in multichannel input system for prenatal health monitoring, Asian Journal of Information Technology, vol.15 (6), pp.1049-1055, 2016.
  131. Dr.K.Bommanna Raja, Ms.Maria Dhayana Latha, Region based Light Absorption Technique with Image segmentation for Tissue Classification, Asian Journal of Research in Social Sciences and Humanities, vol. 6,pp 46 – 58,2016.
  132. Dr.K.Bommanna Raja, Ms.Maria Dhayana Latha, Enhanced Tissue Classification Based on Multi Attribute Sectional Light Absorption Estimation Using Fuzzy Rule Sets, Middle-East Journal of Scientific Research, vol. 23, no.1, pp.34-42, 2016.
  133. Ms.R.Dhivya Devi, An optimized VLSI approach for the tumor detection, International journal of research in electronics, vol. 3, issue 1, 2016.
  134. Ms.S.Nithya, Mr.C.Ashwin, Mr.C.Karthikeyan, Mr.M.Ajithkumar, Advanced Secure Voting System with IoT, International Journal of Engineering and computer science, vol. 5, pp.no 16033-16037, 2016.
  135. Ms.R.Karthiga, Mr.S.Gowtham, Mr.A.Dinesh, Mr.Gnanasekaran.B, Data logging system for vehicle International Journal On Engineering Technology, vol. III, pp.no 2349-3968 - 2016.
  136. Ms. R. Karthiga, Ms.S.Dhivya, Ms. M.Cynthia, Ms.M.Anitha, Embedded based vehicle safety system using GSM technology, International Journal On Engineering Technology and Sciences, vol. III, pp.no 2349-3976, 2016.
  137. Ms. S. Nithya, Mr.C. Arjun, Mr. M. Ashok, Mr.B. Jeevanantham, System Automation And Production Monitoring In Industries Using Arduino With IoT Technology, International Journal Of Engineering and Computer Science, vol. 5, pp.no 16029-16032, 2016.

    138. 2015

  138. Dr.M.Kathirvelu, Mr.N.Sethuramalingam, Mr.M.Vignesh, Mr.K.Vijayakumar Mr.L.Vasudevamoorthy, Low cost mixture module for entertainment industry, International journal of advances in engineering and emerging technology, Vol .7, 2015.
  139. Dr.M.Kathirvelu, Ms.K.Vidhya, Study on graph based SoC verification, International journal of applied engineering research. vol. 10, pp.no. 0973-4562, 2015.
  140. Dr.M.Kathirvelu, Ms. Catherine Arokia Reshma, Design of low power TCAM using STT-RAM based architecture, International journal of applied engineering research. Vol .10, issue 70, 2015.
  141. Dr.B.Jaisankar, Mr. Finney Daniel Shadrach, Mr.S.Venkatesh, Mr.M.Singaram, Implementation of low cost automatic gear suggestion system, International journal on recent and innovation trends in computing communication. vol. 3, pp.no: 2321-8169, 2015.
  142. Ms .M.Vilashini, Ms.Akanksha Krishna Bhakare, Eye gesture recognition using vague logic, Journal of emerging technologies and innovative research. vol. 2, pp.no. 2349-5162, June 2015.
  143. Mr.V.Govindaraj, Ms.M.Kasthuri, Low transition test pattern generator for BIST based applications, International journal of scientific engineering and technology research. vol. 3, pp. 0252-0255, 2014.
  144. Ms.N.Sudha, Ms.P.S.Vishnu Priya, Ms.S.V.Lakshmi, Segmentation of WCE images using fuzzy active contour method, International journal of science and research. vol. 4, 2015.
  145. Ms.S.Nithya, Ms.M.Soundarya, Ms.J.Rohini, Ms.V.Pavithra, Ms.V.Ramya, Enhancement of security using finger vein recognition, International journal of engineering research, vol. 3, 2015.
  146. Ms.S.Nithya, Ms.G.Suganthi, Ms.S.Yuva bharathi, Ms.S.Sowmiyabharani, Automatic medicine prescribing system using bio sensors, International journal of innovative science and applied engineering research. vol. 13, 2015.
  147. Mr.V.Santhanaraj, Ms.D.Santhiya, Reduction of power in adaptive edge enhanced image scalar using ETA adder, International journal of research and scientific innovations. vol. 2, 2015.
  148. Mr.V.Santhanaraj, Ms.D.Santhiya, VLSI implementation of adaptive edge enhanced image scalar using ETA adder, International journal of electronic circuits and systems. vol. 4, 2015.
  149. Mr.V.Santhanaraj, Mr.S.Prasanth, Mr.K.Sarathkumar, Mr.R.Vishnuchander, Mr.T.Vijayaragavan, Segmentation and detection of magnetic resonance image based on K- mean algorithm, International journal of advances in engineering and emerging technology. vol. 7, 2015.
  150. Mr.V.Santhanaraj, Mr.Siddharathraju, Ms.R.Dhivya Devi, Mr.S.Prabhakar, Alternative approach of low power multi bit flip flop in integrated circuits, International journal of latest technology in engineering management and applied science. vol. 4, 2015.
  151. Ms.K.Jeyanthi, Ms.M.Vasuky, Segmentation of microwave images using quadrature filters, International journal of advanced research in electrical electronics and instrumentation engineering. vol. 4, 2015.
  152. Ms.K.Jeyanthi, Ms.M.Vasuky, Artifact removal technique for detection of breast cancer, International journal of electronics and communication engineering and technology. vol. 6, pp.no 01-07, 2015.
  153. Ms.S.Prema, Ms.P.Abinaya, Ms.S.Balajeevitha, Ms.M.Janani, Ethernet IP core verification using system Verilog HDL, International journal of advanced information and communication technology. vol.1, 2015.
  154. Ms.S.Prema, Ms.P.S.Vishnu Priya, Ms.S.V.Lakshmi, Performance comparison of various clock gating techniques, IOSR Journal of VLSI and signal processing, vol. 5, 2015.
  155. Ms.S.Nithya, Ms.S.Sindhu, Mr.S.Sivaraja, An efficient SRECRP protocol for secured energy constraint routing in MANET, International journal of computer science engineering technology, vol. 5, pp. no.51-56, 2015.
  156. Ms.R.Kiruthika, Mr.S.Vadivel, Secured and smart rationing for public distribution system using RFID and GSM, Journal of microcontroller engineering and applications. vol. 2, 2015.
  157. Ms.R.Saranya, Ms.R.Meenakumari, Medical image cryptography through multimodal biometrics, International journal of advanced research in electrical electronics and instrumentation engineering. vol. 4, 2015.
  158. Mr.Chandraprasad, Mr.G.Pradeep Kumar, Mr.M.Singaram, Automatic speed control in restricted areas, International journal of scientific research, vol. 4, 2015.
  159. Ms.D.Sudarvizhi, Ms.S.Gokula Priya, Ms.P.Gowshika, Ms.P.Keerthana, A bar code based courier mail box system using GSM technology, International journal of engineering trends in engineering and development, vol. 2, 2015.
  160. Ms.D.Sudarvizhi, Ms.A.Keerthana, Ms.A.Nesika, Ms.D.Nandhini, Automatic glucose infusion and control system using solenoid valve, International journal of engineering trends in engineering and development, vol 2, 2015.
  161. Ms.R.Karthiga, Dr.S.Mangai, Authentication using face and ear recognition based on principal component analysis, International journal of applied engineering research. vol. 10, 2015.
  162. Ms.R.Karthiga, Dr.S.Mangai, Feature level fusion using face and palm print biometrics for secured authentication, International journal of intellectual advancements and research in engineering computations. vol. 1 (01), pp 1-7, 2014.
  163. Ms.R.Karthiga, Mr.S.Saravana Kumar, Multimodal palm veins- Face biometric authentication, International journal on engineering technology and sciences, vol. 2, 2015.
  164. Ms.S.Nithya, Ms.S.Sindhu, Mr.S.Sivaraja, Comparative analysis of black hole attack in MANET, International journal of engineering and management research. vol. 5, pp.no.202-206, 2015.
  165. Dr.M.Kathirvelu, Ms.S.Suganya, Design and implementation of low power adder using recursive approach, Australian journal of basic and applied sciences, vol. 9(27), pp.655-658, 2015.
  166. Dr.K.Bommanna Raja, Mr.Sriram Selvaraj, Naïve Bayesian Classifier for Acute Lymphocytic Leukemia Detection, ARPN journal of Engineering and Applied Sciences, vol.10, no.16, pp.6888-6892, 2015.

    167. 2014

  167. Mr.V.Govindaraj, Ms.K.Hemalatha, Improving compression ratio using code based test data compression methods, International journal of science, engineering and technology research. vol. 3, 2014.
  168. Mr.V.Govindaraj, Ms.M.Kasthuri, A new low power BIST using hybrid LFSR, International journal of VLSI and embedded systems, vol. 5, March 2014.
  169. Ms.N.Sudha, Novel approach for classification of bowel tumor detection in small intestine, International journal of engineering research and applications. vol. 4, 2014.
  170. Ms.K.Jeyanthi, Ms.K.Subhashini, Masses detection and classification in ultrasound images, IOSR Journal of pharmacy and biological sciences. vol. 9, 2014.
  171. Ms.K.Jeyanthi, Ms.K.Subhashini, Breast cancer detection and classification in high resolution ultrasound images, International journal of innovative research in electrical, electronics, instrumentation and control engineering. vol. 2, 2014.
  172. Ms.K.Jeyanthi, Ms.Vignesh, Automatic multiple object tracking system, International journal of innovative research in electrical, electronics, instrumentation and control engineering. vol. 2, 2014.
  173. Mr.M.Santhanaraj, Ms.S.Radhika, Ms.J.Nandhubhashini, Intelligent railway level crossing assistance, CIIT journal on artificial intelligent systems and machine learning. vol. 6, 2014.
  174. Mr.M.Santhanaraj, Mr.K.C.Gokul Krishnan, Mr.K.S.Gopinath, Identification of irregularities in oral movement using EMG sensors, CIIT journal on artificial intelligent systems and machine learning. vol. 6, 2014.
  175. Mr.V.P.Ajay, Ms.N.Koushika, Ms.S.Dhivyabharathi, Ms.S.Indhumathi, Cognitive radio network modeling using game theoretic approach for effective resource allocation, International journal of advanced research in computer and communication engineering. vol. 3, 2014.
  176. Mr.V.P.Ajay, Mr.V.Selvakumar, Hybrid routers for wireless network on chip, International journal of advanced research in computer and communication engineering, vol. 3, 2014.
  177. Ms.S.Nithya, Ms.S.Bhuvaneshwari, Ms.G.Dhivya, Ms.K.B.Kirthika, A novel approach for secured data transmission in VANET through clustering, IOSR journal of electronics and communication engineering.vol. 9, pp. no 23-30, 2014.
  178. Ms.R.Saranya, Secure transmission of medical images through biometric identification, International journal of innovative research in electrical, electronics, instrumentation and control engineering, vol. 2, 2014.
  179. Ms.R.Saranya, Ms.B.Chinnavedi, Ms.B.Deepika, Ms.R.Gnanasowmiya, Multimodal biometric recognition using SIFT & K - means algorithm, International journal of innovative research in electrical, electronics, instrumentation and control engineering, vol. 2, 2014.
  180. Mr.N.Sathish Kumar, Reduction of manual coupling and side lobe level in linear phased array antenna, International journal of advanced research in electrical, electronics, and instrumentation engineering, vol. 2, 2013.
  181. Mr.N.Sathish Kumar, Mr.V.Gnanaprakash, Mr. Finney Daniel, Back propagation neural network for defect detection of woven fabric, International journal of computer application, vol. 86, no. 1, 2014.
  182. Mr.K.Siddarthraju, Efficient FIR filter based on distributed arithmetic, International journal of advanced research in electrical, electronics, and instrumentation engineering, vol. 2, 2014.
  183. Mr.S.Balamurali, Reduction of manual coupling and side lobe level in linear phased array antenna International journal of advanced research in electrical, electronics, and instrumentation engineering, vol. 2, 2013.
  184. Ms.R.Kiruthika, Mr.S.Vadivel, Incorporating mobility to sensor networks during node failure and their analysis for radio propagation models Journal of communication engineering and system, vol 4, 2014.
  185. Dr.K.Bommanna Raja, Ms.P.R.Vijayalakshmi, Secure key exchange in new multiparty identity based authenticated key agreement protocol, Journal of theoretical and applied information technology. vol. 64, pp. no 3, 2014.
  186. Dr.K.Bommanna Raja, Mr.D.Raghupathi Kumar, Combined low latency and weighted fair queuing based scheduling of an input queued switch, Journal of computer science, vol. 10 (8), pp.no 1447-1457, 2014
  187. Dr.K.Bommanna Raja, Ms.Gayathri .V.Panicker, Ms.Bharathi.V, Ms.Geethu.P, Studies on web based patient support system for health monitoring and quality of life, International journal of chemical environmental and biological sciences. vol. 2, pp.no: 2320- 4087, 2014.
  188. Dr.K.Bommanna Raja, Mr.Sriram selvaraj, K - Means clustering based segmentation of lymphocytic nuclei for acute lymphocytic leukemia detection, International journal of applied engineering research. vol. 9(21) pp.no 11423 - 11432, 2014.
  189. Ms.N.Sudha, Ms.P.S.Vishnu Priya, Ms.S.V.Lakshmi, Analysis of bowel images using wireless capsule endoscopy, International journal of scientific engineering and technology research. vol. 4, 2015.

    190. 2013

  190. Dr.B.Jaisankar, An improved power gating technique for low power circuit using asynchronous logic, International journal of advanced computing and communication systems. vol. 1, 2014.
  191. Ms .M.Vilashini, Ms.V.Yuvapriya, Low cost 160x130 uncooled infra-red sensor array I- manager’s journal on embedded system, vol. 2, pp. no 2, 2013.
  192. Ms.S.Nithya, Ms.S.Bhuvaneshwari, Ms.G.Dhivya, Ms.K.B.Kirthika, A survey on vehicular adhoc network, International journal of advanced research in electrical electronics and instrumentation engineering, vol. 2, 2013.
  193. Mr. Finney Daniel Shadrach, Mr. Rajesh Natarajan, Mr.N.Sathish Kumar, Free Space FSS Filter for 5GHz WLAN, International Journal of Engineering Research & Technology vol. 2, 2013.
  194. Mr. Finney Daniel Shadrach, Mr.Michaelraj Kingston, R, Dr. Ramesh J , Performance Analysis of Steepest Descent Decoding Algorithm for LDPC Codes, International Journal On Recent Trends in Engineering and Technology, vol. 9, No. 1, July 2013.

    195. 2012

  195. Dr.M.Kathirvelu, Dr.T.Manigandan, Design of low power, high speed FIR filter with optimized PDP adders and flip flops for DSP applications, European journal of scientific research. vol. 76, pp.no 214-225, 2012.
  196. Dr.M.Kathirvelu, Dr.T.Manigandan, Design of low power high speed multipliers using optimized PDP full adder, Journal of computational information systems, pp.no:6347-6356, 2012
  197. Dr.B.Jaisankar, Dr. K.Duraiswamy, A contour let based block matching process for effective audio denoising, International review on computers and software, vol. 8, pp.no 3, 2013.

    2022

  1. MotiLal Rinawa, Rajneesh Sharma Prasad, Ramchandra Baviskar, R.Sampathkumar, Radhika G Deshmukh, “Study on Wear Properties of Aluminium Alloy for Different Mass of SiC Particles”, Materials Today: Proceedings, March 2022.
  2. Madavan, R., Saroja, S., Karthick, A., “Performance analysis of mixed vegetable oil as an alternative for transformer insulation oil”, Biomass Conversion and Biorefinery, March 2022.
  3. S. V. Kogilavani, J. Prabhu, R. Sandhiya, M. Sandeep Kumar, UmaShankar Subramaniam, Alagar Karthick, “COVID-19 Detection Based on Lung CT Scan Using Deep Learning Techniques”, Computational and Mathematical Methods in Medicine, March 2022.
  4. S. Saroja, R. Madavan, S. Haseena, M. Blessa Binolin Pepsi, Alagar Karthick, “Human Centered Decision-Making for COVID-19 Testing Center Location Selection: Tamil Nadu - A Case Study”, Computational and Mathematical Methods in Medicine, March 2022.
  5. Aadyasha Patel, O. V. Gnana Swathika, Umashankar Subramaniam, T. Sudhakar Babu, Alok Tripathi, Samriddha Nag, Alagar Karthick, “A Practical Approach for Predicting Power in a Small-Scale Off-Grid Photovoltaic System using Machine Learning Algorithms”, International Journal of Photoenergy, March 2022.
  6. R. R. Remya, Angeline Julius, T. Y. Suman, V. Mohanavel, Alagar Karthick, C. Pazhanimuthu, Antony V. Samrot, M. Muhibbullah, "Role of Nanoparticles in Biodegradation and Their Importance in Environmental and Biomedical Applications", Journal of Nanomaterials, vol. 2022,15 pages,2022. https://doi.org/10.1155/2022/6090846.
  7. J. Karpagam, Chandrashekhar K. Patil, K.V. Pradeep Kumar, Ankur Dutt Sharma, RaviKumar Goyal, Moti Lal Rinawa, M. Sudhakar, Fabrication of Al-Zr -Mg-Ni matrix composite with TiC reinforcement by multi-pass recursive friction stir processing and its characterization, Materials Today: Proceedings,2022.
  8. Uthirasamy, R., V. Kumar Chinnaiyan, S. Vishnukumar, Alagar Karthick, V. Mohanavel, Umashankar Subramaniam, and M. Muhibbullah. "Design of Boosted Multilevel DC-DC Converter for Solar Photovoltaic System." International Journal of Photoenergy 2022 (2022).
  9. Rangaraj, R., S. Sathish, T. L. D. Mansadevi, R. Supriya, Raviteja Surakasi, M. Aravindh, Alagar Karthick et al. "Investigation of Weight Fraction and Alkaline Treatment on Catechu Linnaeus/Hibiscus cannabinus/Sansevieria Ehrenbergii Plant Fibers-Reinforced Epoxy Hybrid Composites." Advances in Materials Science and Engineering 2022 (2022).
  10. Elango, K. S., B. Prabu, S. Sathish, Alagar Karthick, V. Sampathkumar, Sanjeev Kumar, V. Mohanavel, M. Ravichandran, M. Muhibbullah, and Sameh M. Osman. "Mechanical and Durability Studies on Ficus exasperata Leaf Ash Concrete." Advances in Civil Engineering 2022 (2022).
  11. Kumar, R. Ranjith, S. Thanigaivel, A. K. Priya, Alagar Karthick, Chandrabhanu Malla, P. Jayaraman, M. Muhibbullah, Razan A. Alshgari, and Abdulnasser Mahmoud Karami. "Fabrication of MnO2 Nanocomposite on GO Functionalized with Advanced Electrode Material for Supercapacitors." Journal of Nanomaterials 2022 (2022).
  12. Kumar, R. Ranjith, S. Thanigaivel, Nibedita Dey, A. K. Priya, Alagar Karthick, V. Mohanavel, S. Kannadhasan, M. Muhibbullah, and Sameh M. Osman. "Performance Evaluation of Cyclic Stability and Capacitance of Manganese Oxide Modified Graphene Oxide Nanocomposite for Potential Supercapacitor Applications." Journal of Nanomaterials 2022 (2022).
  13. Aravindh, M., S. Sathish, R. Ranga Raj, Alagar Karthick, V. Mohanavel, Pravin P. Patil, M. Muhibbullah, and Sameh M. Osman. "A Review on the Effect of Various Chemical Treatments on the Mechanical Properties of Renewable Fiber-Reinforced Composites." Advances in Materials Science and Engineering 2022 (2022).
  14. Chandrika, V. S., A. Anamika, C. Jeeva, Bhagavathi Perumal, S. Sanal Kumar, J. Femila Roseline, and Ishwarya Komalnu Raghavan. "Natural Fiber Incorporated Polymer Matrix Composites for Electronic Circuit Board Applications." Advances in Materials Science and Engineering 2022 (2022).

    15. 2021

  15. Pandiyan, Pitchai, Subramani Saravanan, Natarajan Prabaharan, Ramji Tiwari, Thangam Chinnadurai, Neelakandan Ramesh Babu, and Eklas Hossain. "Implementation of Different MPPT Techniques in Solar PV Tree under Partial Shading Conditions." Sustainability 13, no. 13 (2021): 7208.
  16. Chandrika, Vanitha Selvaraj, Mohammed El Hadi Attia, Athikesavan Muthu Manokar, Fausto Pedro Garcia Marquez, Zied Driss, and Ravishankar Sathyamurthy. "Performance enhancements of conventional solar still using reflective aluminium foil sheet and reflective glass mirrors: energy and exergy analysis." Environmental Science and Pollution Research (2021): 1-9.
  17. Vijaya, R., K. Maheswari, V. S. Chandrika, T. Ajith Bosco Raj, R. Sreeparimala, and S. Karthick. "Comparison of Fuzzy Logic Systems and its Applications using Mathematical and Technological Perspective." framework 12, no. 02 (2021).
  18. Khasim, Syed, M. S. Rohokale, D. Sathish Kumar, B. Sarath Chandra, Shaik Shakeer Basha, and Rahul Neware. "Artificial Heavy-Duty Structural Technology For Ai Mobile Robots To Control Dynamic Programming."
  19. Basha, Shaik Shakeer, Diana Moses, G. Saravanan, Sumaya Sanober, Syed Khasim, and S. Selvakanmani. "Deep Convolutional Neural Networks For Analyzing Electromagnetic Waves Using Maxwell Equation Model."
  20. Dr.A.M. Saravanan; Dr.R. Rajavignesh; Dr. Baranilingesan. I; Dr.S.P. Anandaraj; Dr. S. Selvakanmani; Purnendu Shekhar Pandey. "Intelligent load forecasting analysis with machine learning algorithms to improve efficiency". Int. J. of Aquatic Science, 12, 2, 2021, 1719-1724.
  21. Dr.V. Shanmugasundaram; Anjali Nighoskar; Sampathkumar R; Dr C Balakrishnan; K. Suresh; Dr Sudharsan Jayabalan. "Improve The Effectiveness In The Solar Tracking System Using Nodemcu Microcontroller". Int. J. of Aquatic Science, 12, 2, 2021, 2026-2032.
  22. Dr.Shaik Shakeer Basha; Dr.Sumaya Sanober; P. Praveena; Dr.S M Udhaya Sankar; Dr.Syed Khasim; Naveen P. "A Survey On Ai In Different Application Domains". Int. J. of Aquatic Science, 12, 2, 2021, 2018-2025.
  23. Sumesh, K. R., G. Saikrishnan, P. Pandiyan, L. Prabhu, S. Gokulkumar, A. K. Priya, Petr Spatenka, and Syam Krishna. "The influence of different parameters in tribological characteristics of pineapple/sisal/TiO2 filler incorporation." Journal of Industrial Textiles (2021): 15280837211022614.
  24. Thangaraj, Rajasekaran, S. Anandamurugan, P. Pandiyan, and Vishnu Kumar Kaliappan. "Artificial intelligence in tomato leaf disease detection: a comprehensive review and discussion." Journal of Plant Diseases and Protection (2021): 1-20.
  25. Kumar, Pitchai Marish, Rengaraj Saravanakumar, Alagar Karthick, and Vinayagam Mohanavel. "Artificial neural network-based output power prediction of grid-connected semitransparent photovoltaic system." Environmental Science and Pollution Research (2021): 1-10.
  26. Chandrika VS, Karthik TS, Bhaskaran J, Hemanth B, Loganathan MK. “Sustainable Energy Harvesting for Self-Powered Micro/ Nanosystems Enabled by Nanotechnology”. J Nucl Ene Sci Power Generat Technol (2021) 10-9.
  27. Gurusamy, P., T. Sathish, V. Mohanavel, Alagar Karthick, M. Ravichandran, Omaima Nasif, Saleh Alfarraj, Velu Manikandan, and S. Prasath. "Finite element analysis of temperature distribution and stress behavior of squeeze pressure composites." Advances in Materials Science and Engineering 2021 (2021).
  28. Baleanu, Dumitru, S. Hemalatha, P. Duraisamy, P. Pandiyan, and Subramanian Muthaiah. "Existence results for coupled differential equations of non-integer order with Riemann-Liouville, Erdélyi-Kober integral conditions." AIMS Mathematics 6, no. 12 (2021): 13004-13023.
  29. Ms Shanthi D L, Anitha Christy Angelin.P, Preethi S, Dasari Anantha Reddy, Dr. Surindar Gopalrao Wawale, Abdus Subhahan D. 2021. “Deep Learning Using Genetic Algorithm And Evolutionary Algorithm For Automation Of Irrigation Systems”. Drugs and Cell Therapies in Hematology 10 (1):2946-54.
  30. J.Jeyabharathi, N G Praveena, Sindhuja V, M.Sreevani, Ranjan Walia, Dr Badugu Suresh. 2021. “Genetic Algorithm Approach For Medical Image Segmentation And Analysis”. Drugs and Cell Therapies in Hematology 10 (1):2985-92.
  31. Ms.Sonia, Dhruva Sreenivasa Chakravarthi, Sushmitha S P, Dr.R.Rajavignesh, C Balakrishnan, Mr. Manikandan Ganesan. 2021. “Smart Healthcare Environment: Automated And Wearable Nano/Bio-Medical Smart Device”. Drugs and Cell Therapies in Hematology 10 (1):2965-72.
  32. Sakthivel S, Dr Chirra Kesava Reddy, Sridhar V, D. I. Ghadage, Jyothi N.M, M.Karpagam. 2021. “Analysis of Machine Learning Techniques for Agriculture Crop Predicting System”. Drugs and Cell Therapies in Hematology 10 (1):2938-45.
  33. Saravanan, N., V. Yamunadevi, V. Mohanavel, V. Kumar Chinnaiyan, Murugesan Bharani, P. Ganeshan, K. Raja, and Alagar Karthick. "Effects of the interfacial bonding behavior on the mechanical properties of E-glass fiber/nanographite reinforced hybrid composites." Advances in Polymer Technology 2021 (2021).
  34. Chinnaiyan, V. Kumar, Chandrashekhar K. Patil, Milind M. Patil, Prasad Ramchandra Baviskar, Alagar Karthick, P. Selvakumar, and S. Rajkumar. "Review on application of phase change material for BIPV system." Materials Today: Proceedings (2021).
  35. Chandrika V S , Kannadasan B, Srikanth Renikunta, M. NAGABUSHANAM4 , Ranjan Walia and V Gopu, “Automatic Detection Of Emotions In Vehicle Drivers Based On Analysis Of Biomedical Data To Improve The Performance”, International Journal of Biology, Pharmacy and Allied Sciences, (2021), 10-11.
  36. Shanthi D L , Surapaneni Krishna Mohan, Preethi S, Dasari Anantha Reddy, Surindar Wawale And Abdus Subhahan D, “The Smart Irrigation Sector Determines the Best Development Approach for Certain Optimized Problems Using Machine Learning”, International Journal of Biology, Pharmacy and Allied Sciences (2021), 10-11.
  37. Jeyabharathi. J , Praveena G.N, Sindhuja V, Sreevani.M, Ranjan Walia and Badugu Suresh. “Approach to the Genetic Algorithm for Segmenting and Analysing Medical Images”, International Journal of Biology, Pharmacy and Allied Sciences (2021), 10-11.
  38. Sonia Chhabra , Dhruva Sreenivasa Chakravarthi, Sushmitha S P, Rajavignesh.R, Balakrishnan.C And Dillip Narayan Sahu. “Smart Health Environment: Nano/Bio-Medical Smartdevice Automated and Portable”, International Journal of Biology, Pharmacy and Allied Sciences (2021), 10-11.
  39. Jyoti A. Dhanke , Umamaheswari K, Sowmiya S, Vigneshwaran.K, Vinothini.C And Dharmbir Singh. “Micro and Nano-Technology (MNT) Applications in Healthcare to Build Artificial Organs that Replace Damaged Human Tissue due to Radioactivity”, International Journal of Biology, Pharmacy and Allied Sciences (2021), 10-11.
  40. Chandrika, V. S., J. Samson Isaac, Jackson Daniel, K. Kathiresan, C. T. Muthiah, E. Fantin Irudaya Raj, and Ram Subbiah. "Experimental investigation of the solar distiller using nano-black paint for different water depths." Materials Today: Proceedings (2021).
  41. Saravanan, G., Shailesh S. Parkhe, Chetan M. Thakar, Vaibhav V. Kulkarni, Hari Govind Mishra, and G. Gulothungan. "Implementation of IoT in production and manufacturing: An Industry 4.0 approach." Materials Today: Proceedings (2021).
  42. Podder, Amit Kumer, Anik Kumar Das, Eklas Hossain, Nallapaneni Manoj Kumar, Naruttam Kumar Roy, Hassan Haes Alhelou, Alagar Karthick, and Amer Al-Hinai. "Integrated modeling and feasibility analysis of a rooftop photovoltaic systems for an academic building in Bangladesh." International Journal of Low-Carbon Technologies 16, no. 4 (2021): 1317-1327.
  43. Raja, Thandavamoorthy, Vinayagam Mohanavel, Thanikodi Sathish, Sinouvassane Djearamane, Palanivel Velmurugan, Alagar Karthick, Omaima Nasif et al. "Thermal and Flame Retardant Behavior of Neem and Banyan Fibers When Reinforced with a Bran Particulate Epoxy Hybrid Composite." Polymers 13, no. 22 (2021): 3859.
  44. Rajendran, Vijayakumar, Harichandran Ramasubbu, Karthick Alagar, and Vignesh Kumar Ramalingam. "Performance analysis of domestic solar air heating system using V-shaped baffles–an experimental study." Proceedings of the institution of mechanical engineers, part E: journal of process mechanical engineering 235, no. 5 (2021): 1705-1717.
  45. Srinivasan, D., G. Veerappan, M. Ravichandran, C. Anand Chairman, S. Marichamy, V. Mohanavel, and A. Karthick. "Investigation on electric erosion behavior of nickel-based super alloy (Waspaloy: Ni, Cr, Co, Mo, Ti, Al) using response surface methodology." Surface Topography: Metrology and Properties 9, no. 3 (2021): 035006.
  46. Alagarsamy, S. V., R. Balasundaram, M. Ravichandran, V. Mohanavel, Alagar Karthick, and S. Sathiya Devi. "Taguchi approach and decision tree algorithm for prediction of wear rate in zinc oxide-filled AA7075 matrix composites." Surface Topography: Metrology and Properties 9, no. 3 (2021): 035005.
  47. Singh, Digvijay, Rubina Chaudhary, and Alagar Karthick. "Review on the progress of building-applied/integrated photovoltaic system." Environmental Science and Pollution Research 28, no. 35 (2021): 47689-47724.
  48. Prasad, Arani Rajendra, Ramalingam Shankar, Chandrashekhar K. Patil, Alagar Karthick, Amit Kumar, and Robbi Rahim. "Performance enhancement of solar photovoltaic system for roof top garden." Environmental Science and Pollution Research 28, no. 36 (2021): 50017-50027.
  49. Sathish, Thanikodi, Vinayagam Mohanavel, Khalid Ansari, Rathinasamy Saravanan, Alagar Karthick, Asif Afzal, Sagr Alamri, and C. Ahamed Saleel. "Synthesis and characterization of mechanical properties and wire cut EDM process parameters analysis in AZ61 magnesium alloy+ B4C+ SiC." Materials 14, no. 13 (2021): 3689.
  50. Naveenkumar, Rasaiah, Manickam Ravichandran, Balasubramaniam Stalin, Aritra Ghosh, Alagar Karthick, Lawrence Sundar Raj Leo Aswin, Swaminathan Shanmugasundaram Harini Priyanka, Shanmugavelan Pradeep Kumar, and Sundramurthy Kiran Kumar. "Comprehensive review on various parameters that influence the performance of parabolic trough collector." Environmental Science and Pollution Research 28, no. 18 (2021): 22310-22333.
  51. Naveenkumar, Rasaiah, Manickam Ravichandran, Vinayagam Mohanavel, Alagar Karthick, Lawrence Sundar Raj Leo Aswin, Swaminathan Shanmugasundaram Harini Priyanka, Sundramurthy Kiran Kumar, and Shanmugavelan Pradeep Kumar. "Review on phase change materials for solar energy storage applications." Environmental Science and Pollution Research (2021): 1-42.
  52. Subramaniam, Umashankar, M. Monica Subashini, Dhafer Almakhles, Alagar Karthick, and S. Manoharan. "An Expert System for COVID-19 Infection Tracking in Lungs Using Image Processing and Deep Learning Techniques." BioMed Research International 2021 (2021).
  53. Hmidet, Ali, Umashankar Subramaniam, Rajvikram Madurai Elavarasan, Kannadasan Raju, Matias Diaz, Narottam Das, Kashif Mehmood, Alagar Karthick, M. Muhibbullah, and Olfa Boubaker. "Design of Efficient Off-Grid Solar Photovoltaic Water Pumping System Based on Improved Fractional Open Circuit Voltage MPPT Technique." International Journal of Photoenergy 2021 (2021).
  54. Vetrivel Sezhian, M., K. Giridharan, D. Peter Pushpanathan, G. Chakravarthi, B. Stalin, Alagar Karthick, P. Manoj Kumar, and Murugesan Bharani. "Microstructural and mechanical behaviors of friction stir welded dissimilar AA6082-AA7075 joints." Advances in Materials Science and Engineering 2021 (2021).
  55. Guggari, Geetanjali S., S. Shivakumar, G. A. Manjunath, R. Nikhil, Alagar Karthick, Abhilash Edacherian, C. Ahamed Saleel, Asif Afzal, S. Prasath, and B. Saleh. "Thermal and mechanical properties of vinyl ester hybrid composites with carbon black and glass reinforcement." Advances in Materials Science and Engineering 2021 (2021).
  56. Munimathan, Arunkumar, T. Sathish, V. Mohanavel, Alagar Karthick, R. Madavan, Ram Subbiah, Chandran Masi, and S. Rajkumar. "Investigation on heat transfer enhancement in microchannel using Al2O3/water nanofluids." International Journal of Photoenergy 2021 (2021).
  57. Stalin, B., M. Ravichandran, Alagar Karthick, M. Meignanamoorthy, G. T. Sudha, S. Karunakaran, and Murugesan Bharani. "Investigations on microstructure, mechanical, thermal, and tribological behavior of Cu-mwcnt composites processed by powder metallurgy." Journal of Nanomaterials 2021 (2021).
  58. Sathish, T., S. Tharmalingam, V. Mohanavel, K. S. Ashraff Ali, Alagar Karthick, M. Ravichandran, and Sivanraju Rajkumar. "Weldability investigation and optimization of process variables for TIG-welded aluminium alloy (AA 8006)." Advances in Materials Science and Engineering 2021 (2021).
  59. Yoganandam, K., Vigneshwaran Shanmugam, A. Vasudevan, D. Vinodh, N. Nagaprasad, Balasubramaniam Stalin, Alagar Karthick, Chandrabhanu Malla, and Murugesan Bharani. "Investigation of dynamic, mechanical, and thermal properties of Calotropis procera particle-reinforced PLA biocomposites." Advances in Materials Science and Engineering 2021 (2021).
  60. Sathish, T., V. Mohanavel, Alagar Karthick, M. Arunkumar, M. Ravichandran, and S. Rajkumar. "Study on Compaction and machinability of silicon nitride (Si3N4) reinforced copper alloy composite through P/M route." International Journal of Polymer Science 2021 (2021).
  61. Ali, K. S., V. Mohanavel, M. Ravichandran, S. Arungalai Vendan, T. Sathish, and A. Karthick. "Microstructure and Mechanical properties of friction stir welded SiC/TiB2 reinforced aluminum hybrid composites." Silicon (2021): 1-11.
  62. Chinnadurrai, C. L., S. Ravindran, and S. Udaiyakumar. "Energy Management of a Microgrid based on LSTM Deep Learning Prediction Model." In 2021 Smart Technologies, Communication and Robotics (STCR), pp. 1-6. IEEE, 2021.
  63. Yoganandam, K., Vigneshwaran Shanmugam, A. Vasudevan, D. Vinodh, N. Nagaprasad, Balasubramaniam Stalin, Alagar Karthick, Chandrabhanu Malla, and Murugesan Bharani. "Investigation of dynamic, mechanical, and thermal properties of Calotropis procera particle-reinforced PLA biocomposites." Advances in Materials Science and Engineering 2021 (2021).
  64. Pannerselvam, Anandhraj, Mohana Sundaram Kuppusamy, Jayaraman Shanmugapriyan, Vishnu Kumar Kaliappan, and Ravishankar Sathyamurthy. "Experimental Investigation of Removal of Flue Gas Emissions Exhaust from Municipal Solid Waste Incinerator using Photo-Voltaic based Electrostatic Precipitator." (2021).
  65. Sugavanam, K. R., K. Mohana Sundaram, R. Jeyabharath, and P. Veena. "Convolutional Neural Network-based harmonic mitigation technique for an adaptive shunt active power filter." Automatika 62, no. 3-4 (2021): 471-485.
  66. K. Mohana Sundaram, P. Prakash, D. Karthikeyan, Wubishet Degife Mammo. “Improved Carbon Nanotube Field Effect Transistor for Designing a Hearing Aid Filtering Application.” Journal of nanomaterials 2021
  67. Chandrika V S, Alagar Karthick, Experimental Analysis of Solar Concrete Collector for Residential Buildings, International Journal of Green Energy, Taylor & Francis, February 2021.
  68. Chandrika V S, Alagar Karthick, Ravishankar Sathyamurthy, Performance Assessment of Free Standing and Building Integrated Grid Connected Photovoltaic System for Southern Part of India, Building Services Engineering Research and Technology, SAGE Publishers, Volume-42, Issue-2, Dec-2020
  69. Chandrika V S, RavishankarSathyamurthy, Performance Enhancements of Conventional Solar Still Using Reflective Aluminium Foil Sheet and Reflective Glass Mirrors: Energy and Exergy Analysis, Environmental Science and Pollution Research, Springer, February 2021.
  70. G.Saravanan, S.Chandraprabha, C.Dinesh, A.Mohamed Ibrahim, IOT Materials Enabled Indoor Light Illumination Monitoring System, Materials Today: Proceedings, February 2021.
  71. J.Karpagam, L.Prabu, V.Krishnaraj, S.Sathish, S.Gokulkumar, N.Karthi, Experimental Investigation on Mechanical Properties of Flax/Banana/Industrial Waste Tea Leaf Fiber Reinforced Hybrid Polymer Composites, Materials Today: Proceedings, Elsevier, March 2021.
  72. V.J.Vijayalakshmi, A.Amudha, M.Siva Ramkumar, G.Emayavaramban, Modeling, Simulation and Design of Luo Converter for DC Micro Grid Application, IEEE Explore, March 2021.
  73. R.Uthirasamy, S.Vishnukumar, S.Aswath, G.Aloy Anuja Mary, Design and Development of Vehicle Breakdown Assistance System: i - Touch, Materials Today: Proceedings, Elsevier, March 2021.
  74. I.Baranilingesan, N. Yogambal Jayalakshmi, R. Shankar, Umashankar Subramaniam Alagar Karthick, Novel Multi-Time Scale Deep Learning Algorithm for Solar Irradiance Forecasting, Energies, MDPI, April 2021
  75. I.Baranilingesan, Optimization Algorithm-Based Elman Neural Network Controller for Continuous Stirred Tank Reactor Process Model, Current Science, Vol. 120, No.8 April 2021.
  76. G.Saravanan, A Review Paper on Wireless Sensor Network Techniques in Internet of Things, Materials Today: Proceedings, Elsevier, April 2021
  77. C.Pazhanimuthu, I.Baranilingesan, Alagar Karthick, An improved control Algorithm for Series Hybrid Active Power Filter based on SOGI-PLL under Dynamic Load Conditions, Solid State Communications, May 2021.

    78. 2020

  78. Ravikumar P, High Performance Single-Input three output DC-DC High Gain Converter for fuel Cell- Based Electric Vehicles, Electrical Engineering Springer, March, 2020.
  79. Karthick A, Baranilingesan I, Performance enhancement of copper indium diselenide photovoltaic module, Asia-pacific Journal of Chemical, March, 2020.
  80. Gowrishankar A, Experimental Validation of Solar Photovoltaic based Unified Power Quality Conditioner with Modified Power Angle Control Scheme, Journal of Testing and Evaluation, April, 2020.
  81. Karthick A, Investigation of a binary eutectic mixture of Phase change material for building Integrated Photovoltaic modules, Solar Energy Materials and Solar Cells, Elsevier, April, 2020.
  82. Kumar Chinnaiyan V, Ultrasonic Sight, IEEE Xplore Digital Library, April, 2020
  83. Uthirasamy R, Karpagam J, Vijayalakshmi V J, Ravikumar P, Soft Switched Stepped DC-DC-AC Hybrid Converter, International Journal of Scientific & Technology Research, April, 2020
  84. Uthirasamy R, Kumar Chinnaiyan V, Karpagam J, Vijayalakshmi V J, Ravikumar P, Mitigation of Power Quality issues on Hybrid Boost Converter: A Comparative Analysis, Journal of Electrical Systems, April, 2020.
  85. Vijayalakshmi V J, Centralized Attendance Monitoring System, IEEE Xplore Digital Library, April, 2020.
  86. Karpagam J, Smart Irrigation System using IoT, IEEE Xplore Digital Library, April, 2020.
  87. Vignesh C J, Revathi R, Material Optimization Design for Induction Motor, Indian Scientific Journal of Research in Engineering and Management, April 2020.
  88. Karthick A, Status of BIPV and BAPV System for Less Energy-Hungry Building in India—A Review, Applied Sciences, April, 2020.
  89. Jagadesh T, Autonomous Indoor Mapping using Raspberry Pi, International Journal for Research in Engineering, Science and Management, April, 2020.
  90. Mohamed Ibrahim A, Design and Implementation of Solar Axis Tracking System, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, April, 2020.
  91. Divya S, Autonomous E-Rationing System, International Journal of Science and Innovative Engineering & Technology, May, 2020.
  92. Jagadesh T, Implementation of Prewitt Operator based Edge Detection Algorithm using FPGA, International Journal for Research in Applied Science & Engineering Technology, May, 2020.
  93. S.Chandraprabha,C.Dinesh, A.Mohamed Ibrahim, G.Saravanan, LSTM MLSTM Model Based Wind Speed Forecasting Model Based Wind Speed Forecasting, International Journal of Future Generation Communication and Networking, Vol. 13 No. 4, Oct-2020.
  94. B.Lalitha, G.Ramya, T.Gulam Mohammed Moinuddeen, Comparative Analysis of Multilevel Converter based on Harmonic Distribution, TEST Engineering and Management, Volume-83, Aug-2020.
  95. B.Lalitha, R.Sampath Kumar, K.Lakshmi, G.Ramya, T.Gulam Mohammed Moinuddeen, Harmonic Analysis of Reduced Device Count Multilevel Converter, Advances in Mathematics: Scientific Journal, Research Publications, Volume-9, Issue-10, Sep-2020.
  96. R.Uthirasamy, V.Kumar Chinnaiyan, J.Karpagam, V.J.Vijayalakshmi, Automatic Water Management System for Farming and Bio Medical Applications, Bioscience Biotechnology Research Communications, Volume-13, Issue-4, 2020.
  97. R.Uthirasamy, J.Karpagam, V.Kumar Chinnaiyan, V.J.Vijayalakshmi, P.Ravikumar, Mitigation of Power Quality Issues on Hybrid Boost Converter: A Comparative Analysis, Journal of Electrical Systems, Volume-16, Issue-4, 2020.
  98. R.Uthirasamy, J.Karpagam, V.J.Vijayalakshmi, Umashankar Subramaniam, Extended Boost DC-DC-AC Converter for Electric Vehicle Applications, IOP Conference Series:Materials Science and Engineering, Volume-937, 2020.
  99. K.Balamurugan, S.Vivekanandan, C.J.Vignesh, V.Kamalkumar, Design and Analysis of Power Efficient 3-Tap FIR Digital Filter using Folding Architecture, International Journal of Future Generation Communication and Networking, Vol. 13 No. 4, Oct-2020.
  100. C.Pazhanimuthu, V.S.Chandrika, I.Baranilingesan, S.Ravindran, P.Praveena, Implementation of IOT Based Smart Energy Management System in College Campus, International Journal of Future Generation Communication and Networking, Vol. 13 No. 4, Oct-2020.
  101. R.Revathi, V.Kumar Chinnaiyan, N.Senthilnathan, J.Sevugan Rajesh, A Review of Demand Response Opportunities and Challenges for Residential Applications in Smart Grid, International Journal of Future Generation Communication and Networking, Vol. 13 No. 4, Oct-2020.
  102. R.Revathi, J.Sevugan Rajesh, R.Karthikeyan, Hybrid DPSO based MPPT Control of High Static Gain Converter in Photovoltaic System for DC Microgrid Applications, IOP Conference Series:Materials Science and Engineering, Vol. 1 No. 937, Oct-2020.
  103. G.Saravanan, A.Mohamed Ibrahim, D.Sathishkumar, V.S.Chandrika, U.Vanitha, IoT based Speed Control of BLDC Motor with Harris Hawks Optimization Controller, International Journal of Grid and Distributed Computing, Vol. 13 No. 1, Jul-2020.
  104. R.Uthirasamy, V.Kumar Chinnaiyan, J.Karpagam, V.J.Vijayalakshmi, Stepped DC Link Converters for Solar Power Applications, Green Energy, Scrivener Publishing, Wiley, Aug-2020.
  105. C.Dinesh, G.Puthilibai, DineshKumar Singaravelu, S.Chitradevi, M.Sudhakar, M.Keerthika, Experimental Investigation Regarding Emissivity of Black Nickel Coated on Aluminium Surface, Materials Today: Proceedings, Elsevier, Volume-33, Issue-7, 2020.
  106. V.S.Chandrika, RaghuramPradhan, G.Thilagavathi, D.Muruganandam, K.Hariprasad, J.Adlin Paul, Study on the Thermal Resistance Comparison on Al with SiO2 Composites for Electronics Chips, Materials Today: Proceedings, Elsevier, Volume-33, Issue-7, 2020.
  107. G.Saravanan, S.Vivekanandan, A.K.Saravanan, A.Rajendraprasad, D.Muruganandam, M.Sudhakar, Study on Natural Fiber Composites of Jute, Pineapple and Banana Compositions Percentage of Weight Basis for Thermal Resistance and Thermal Conductivity, Materials Today: Proceedings, Elsevier, Volume-33, Issue-7, 2020.
  108. V.S.Chandrika, E.Parimalasundar, Kumar NMG, Selvarasu Ranganathan, Kumar Reddy Cheepati, Performance Analysis of CHB and CSD Multilevel Inverter for PV and Fuel Cell Integration with Reduced THD, International Journal of Electrical Engineering and Technology, Volume-11, Issue-9, Nov-2020.
  109. R.Sampathkumar, D.Sathish Kumar, B.Lalitha, R.Revathi, A.Gowrishankar, Performance Analysis of Power Quality Improvement for Hybrid Renewable Energy Source using Multilevel Inverter, International Journal of Future Generation Communication and Networking, Vol. 13 No. 4, Oct-2020.
  110. G.Saravanan, C.Dinesh, A.Mohamed Ibrahim, V.Kumar Chinnaiyan, Investigation of Controller Design for EV System with Manta Ray Foraging Optimization Approaches, Solid State Technology, Volume-63, Issue-6, Nov-2020.
  111. Baranilingesan I, Aswin S, Jagadesh P, Keerthi Aravind S P, Kesava Suriyan P, Automatic Switching of Three Phase Induction Motor during Fault Condition, International Journal of Engineering and Advanced Technology, Volume-9, Issue-6, August 2020.
  112. Ravikumar P, Abirami K, Anushiya R, Elakkiya M, Harshidha P R, Solar Powered Unmanned Cleaning Robot, International Journal of Engineering and Advanced Technology, Volume-9, Issue-6, August 2020.
  113. Ravikumar P, Akash B, Hari Krishnan R, Lakshmi Narayanan S, Arunodhayan N, Solar Powered Low Voltage Pump Display, International Journal of Engineering and Advanced Technology, Volume-9, Issue-6, August 2020.
  114. Vijayalakshmi V J, Devaprakash L, Gowtham K, Murali R, Muralidharan K, Cloud Based Attendance Monitoring, International Journal of Engineering and Advanced Technology, Volume-9, Issue-6, August 2020.
  115. Vijayalakshmi V J, Uthirasamy R, Bharathi S, Madhuleka K, Pattern Recognition through Dip for Wind Turbine , International Journal of Engineering and Advanced Technology, Volume-9, Issue-6, August 2020.
  116. Sampathkumar R, Naveen N, Sarjun Hallaj M, Sudharson S R, Design and Implementation of Borewell Child Rescue Machine, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  117. Chandrika V S, Nithika P, Sujitha R, Vannatharini P, Design and Implementation of Smart GIL System, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  118. Vivekanandan S, Kamaludeen J, Sriram T, Saravanakumar V, Shabareeshan M, Crash Detection and Rescue System for Vehicles, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  119. Mohamed Ibrahim A, Murali Ram S, Prakash S K, Ragghav S, Rahul S, A Novel Method to Generate Maximum Power Using Maximum Power Point Tracker in Solar PV Systems, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  120. Sathish Kumar D, Subashree P, Nethra M, Rajashree V, Vanmathy P, Design and Implementation of Smart Medicine Box, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  121. Divya S, Samyuktha R, Srinithi G S, Renugasri G, Sumithra S, Design of Autonomous E - Rationing System, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  122. Revathi R, Muthunivedha R, Pragadhe S, Susma S, Tharunika S, Design of Smart Power System, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  123. Jagadesh T, Praveen R, Neu Pramod M, Sridhar S R, Autonomous Indoor Mapping Using Rasphberry Pi, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  124. Dinesh C, Selvakumar S, Srivathsalyan N, Naresh P, Design and Development of a Portable Spot Welding Machine for Joining Metal Using HCT, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  125. Lalitha B, Nidyadarsanaa S, Pavithra N, Shalini K, Shanmathi V S, An Efficient MPPT Controller for Variable Frequency Drives in Water Pumping System, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  126. Pazhanimuthu C, Jerine Victor R, Sri Gowtham Priyan U S, Nithin M, Vijay E, Cost Effective Pyrheliometer for Solar Radiation Measurement, International Journal of Future Generation Communication and Networking, Volume-13, Issue-4, September 2020.
  127. Kumar Chinnaiyan V, Abarna M, Lourde Teresha A, Devisri R, Maithreyini M, Helping Hand for Unsighted People - Acousticsight, International Journal of Recent Technology and Engineering, Volume-9, Issue-3, September 2020.
  128. Karpagam J, Bavithra P, Infranta Merlin I, Kousalya J, IoT based Smart Farming, International Journal of Recent Technology and Engineering, Volume-9, Issue-3, September 2020.
  129. Kamalkumar V, Chaarumathi P, Divya S R, Divyajothi R, Mehereethaa K V, Voice Controlled Fire Fighting Robot, International Journal of Recent Technology and Engineering, Volume-9, Issue-3, September 2020.
  130. Kamalkumar V, Chandhini G, Chitra B, Kiruthikadevi P, Bhagya Sasi, IoT based Underground Drainage Monitoring System, International Journal of Recent Technology and Engineering, Volume-9, Issue-3, September 2020.
  131. Vijayalakshmi V J, Guna, Hariharan, Mohan Kumar, Mitigation of Harmonics in Power Network with Real Time Data Based on Etap, International Journal of Recent Technology and Engineering, Volume-9, Issue-10, October 2020.
  132. Karpagam J, Aldrin Jose, Andrew Franklin Raj A, Arunmozhi T M, Kuttiraj G, Dual Source Self Displaying Water Pumps, International Journal of Engineering and Advanced Technology, Volume-10, Issue-1, October 2020.
  133. Praveena P, Arabi Madharshan, Aravinth, Dheneshraajan, Gokul, Hybrid Electric Charging Station using Raspberry Pi, International Journal of Engineering and Advanced Technology, Volume-10, Issue-1, October 2020.

    134. 2019

  134. R.Revathi, Solar Powered Smart Garbage Can for Waste Segregation, International Journal of Engineering Science and Computing, Vol. 9, Issue 3, pp.20163-20164, March 2019.
  135. A.Mohamed Ibrahim, Real time Monitoring system of Industrial Machines with Node MCU using IoT in American International Journal of Research in Science, Technology, Engineering & Mathematics, Special Issue, pp. 107-109, 2019.
  136. S.Divya, Animal Health Monitoring, Rumination and Location Tracking by GSM Module and MQTT based Cloud Server, International Journal of Intellectual Advancements and Research in Engineering Computations, Vol.7, Issue.2, 2019.
  137. Gowrishankar A, SPV based UPQC with modified Power Angle Control scheme for enhancement of Power Quality, Journal of Circuits, Systems and Computers, World Scientific publishing Company, May, 2019 .
  138. G.Saravanan, Machine Learning based Secure Data Analyzing for FPGA based Solar PV Fed Speed Control of Brushless DC Motor using Versatile Threshold Optimization Technique, International Journal of Wavelets, Multi Resolution and Information Processing, World Scientific Publishing Company, August, 2019.
  139. Mohamed Ibrahim A, Predictive machine learning and data acquisition for power quality improvement in FACTS devices with optimum power flow control based on cross difference progression and coordination examining algorithm, International Journal of Wavelets, Multi resolution and Information Processing, World Scientific Publishing Company, August, 2019.
  140. Sathishkumar D, Adaptive power management strategy based optimization and estimation of a renewable energy storage system in standalone micro grid with machine learning and data monitoring, International Journal of Wavelets, Multi resolution and Information Processing, World Scientific Publishing Company, September, 2019.
  141. Karthick A, Performance evaluation of building Integrated Photovoltaic systems for residential buildings in south India, Building services engineering research and technology, Sage publishers, October, 2019.
  142. Karthick A, Building Integrated Photovoltaic modules and the integration of phase change materials for equatorial applications, Building services engineering research and technology, Sage publishers, October, 2019.
  143. Saravanan G, Sathish kumar D, Mohamed Ibrahim A, Enhanced Chaotic Grasshopper Optimization Algorithm based PID Controller for Automatic Voltage Regulator System, International Journal of Recent Technology and Engineering, Blue Eyes Publication, December, 2019.

    144. 2018

  144. R.Uthirasamy, V. Kumar Chinnaiyan, J.Karpagam, Investigation on Three-Phase Seven-Level Cascaded DC-link Converter using Carrier Level Shifted Modulation Schemes for Solar PV System Applications, Renewable Power Generation, IET, Vol.12, Issuse.4, pp.439-449, 2018.
  145. V. Kumar Chinnaiyan, Cascaded Structure Multilevel Inverter with Reduced Power Electronic Components, Electric Power Components and Systems, Taylor & Francis, 2018.
  146. J. Prasanth Ram, V. Kumar Chinnaiyan, Design and Testing of Two Phase Array Reconfiguration Procedure for Maximizing Power in Solar PV Systems under Partial Shade Conditions (PSC), Energy Conversion and Management, Elsevier, Vol.178, pp.92-110, 2018.
  147. J.Prasanth Ram, A Simple Sensorless and fixed Reconfiguration Scheme for Maximum Power Enhancement in PV Systems, Energy Conversion and Management, Elsevier, Vol.172, pp.402-417, 2018.
  148. J.Prasanth Ram, Extended Analysis on Line-Line and Line-Ground Faults in PV Arrays and a Compatibility Study on Latest NEC Protection Standards, Journal of Energy Conversion and Management, Elsevier, Vol.196, pp. 988-1001, 2018.
  149. J.Prasanth Ram, Detection and identification of global maximum power point operation in solar PV applications using a hybrid ELPSO-P&O tracking technique, IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 7, pp. 121432-121445, 2018.

    150. 2017

  150. V. Kumar Chinnaiyan, Multilevel Inverter Topology using Single Source and Double Source Module with Reduced Power Electronic Components, Journal of Engineering, IET, Vol (5), pp.139-148, 2017.
  151. V. Kumar Chinnaiyan, Simulated Annealing Based Selective Harmonic Elimination for Multi-Level Inverter, Elsevier Energy Procedia, Vol-117, pp.855-861, 2017.
  152. V. Kumar Chinnaiyan, Single-Ended Resonant Inverter for Photovoltaic Applications, Power Research, A Journal of CPRI, Vol.12, Issue3, pp.555-560, 2017.
  153. V. Kumar Chinnaiyan, An Analysis of Cuckoo Search Algorithm based Selective Harmonic Elimination for Multilevel Inverter, International Journal of Circuit Theory and Applications, Vol.9, pp. 6631-6637, 2017.
  154. V. Kumar Chinnaiyan, A Review on Multilevel Inverter: Topologies, Control Strategies and Application, Power Research, A Journal of CPRI, Vol.11, Issue.4, pp.715-724, 2017.
  155. V. Kumar Chinnaiyan, Interleaved Flyback Micro Inverter based Solar Photovoltaic Power Generation System, Power Research, A Journal of CPRI, vol.12, Issue.2, pp.241-244, 2017.
  156. V. Kumar Chinnaiyan, Modeling and Simulation of High-Efficiency Interleaved Flyback Micro-inverter For Photovoltaic Applications, Materials Today, Elsevier, Vol.4, Issuse.9, pp.10417-10421, 2017.
  157. R.Uthirasamy, Distinct Exploration on Two-level and Hybrid Multilevel Converter for Standalone Solar PV Systems, In Proceedings of 2nd International Conference on Intelligent Computing and Applications, pp. 301-316, 2017.
  158. R.Uthirasamy, Performance Analysis of Z-source and Boost Multilevel Inverter, International Journal of Control Theory and Applications, Vol.9. pp.3599-3605, 2017.
  159. V.Karthikeyan, Recent Advances and Challenges of Fuel Cell Based Power System Architectures and Control, A review: Renewable and Sustainable Energy Reviews, 73, pp.10-18, 2017.
  160. V.Karthikeyan, Recent Advances and Challenges of Fuel Cell Based Power System Architectures and Control, A review: Renewable and Sustainable Energy Reviews, 73, pp.10-18, 2017.
  161. S. Vivekanandan, Technology and Key Strategy of IE4 PMBLDC Motor Drive for Electric Vehicle, International Journal of Engineering Research and Applications, Vol.7, Issue.2, pp.25-31, 2017.
  162. S. Vivekanandan, P.Kamalakannan, Design and Simulation of Solar Powered B-4 Inverter Induction Motor, International Journal of Applied Research Motor Indian Journal of Applied Research, Vol.6, Issue.9, 2017.
  163. S. Vivekanandan, A Novel Camera based Mobile Robot with Obstacle Avoidance and Fire Extinguish Control, International Journal of Engineering Research and Applications Vol.6, Issue.4, pp. 5-7, 2017.
  164. D.Sathish Kumar, Smart Wheel Chair using Advanced Mechanism, International Journal of Latest Engineering Research and Application, Vol.2, Issue 4, pp.47-50, 2017.
  165. A.Mohamed Ibrahim, An Electronic Stick Guidance for Visually Impaired People Navigation using Audio System, International Journal of Engineering Science and Computing, Vol.7, Issue.4, pp.6303, April 2017.
  166. K.Sivakumar, Comparative Analysis of Different Charge Controllers, International Journal of Innovative Research in Technology, Vol. 3, Issue 11, pp.191-194, April 2017.
  167. P.K.Arun Kumar, Detection and Classification of Complex Power Quality Disturbances using S-transform Amplitude Matrix based Decision Tree for Different Noise Levels, International Transactions on Electrical Energy Systems, Wiley Blackwell, Vol.27, Issue.4, pp.2286-2292, April 2017.
  168. P.K.Arun Kumar, Performance Analysis of Z-source and Boost Multilevel Inverter, International Journal of Control Theory and Applications, Vol.9, pp.3599-3605, 2017.
  169. R.Uthirasamy, V. Kumar Chinnaiyan, J.Karpagam, V.J.Vijayalakshmi, Design and Analysis of Stepped DC Link Hybrid Converter for Solar PV Systems, Journal of Electrical Systems, Vol.13, Issue.3, pp.558-567, 2017.
  170. R.Uthirasamy, J.Karpagam, V.J.Vijayalakshmi, P.Ravikumar, Implementation of Multilevel Inverter for Solar powered Industrial UPS Systems, International Journal of Electrical and Electronics Engineers, Vol.9, Issuse.2, pp426-438, Dec 2017.
  171. J.Karpagam, R.Uthirasamy, P.Ravikumar, Investigation on Hybrid Power Converters for Cascading Solar PV Systems, IEEE 4th International Conference on Electrical Energy Systems (ICEES), pp. 88-93, 2017.
  172. V.Karthikeyan, HCC-based Interleaved Boost Converter with Optimal Switching Frequency Control of Wind Energy Conversion System for DC Microgrid Application, The Journal of Engineering, Vol. 2017, Issue. 8, pp. 495–505, 2017.
  173. V.Karthikeyan, Energy Storage Systems in Solar-Wind Hybrid Renewable Systems, Smart Energy Grid Design for Island Countries, Springer, (pp. 189-222), 2017.
  174. V.Karthikeyan, Light-load Efficiency Improvement by Extending ZVS Range in DAB-Bidirectional DC-DC Converter for Energy Storage Applications, Energy, Elsevier, Vol.130, pp.15-21, July 2017.
  175. K.Sivakumar, Optimal Battery Charging of Solar Powered Vehicle and Monitoring using Lab VIEW, International Journal for Research in Applied Science & Engineering Technology, Vol.5, Issuse.VII, pp.853-857, July 2017.
  176. K.Sivakumar, Recent Trends and Improvisations in FPGA, IOSR Journal of Electrical and Electronics Engineering, Volume 12, Issue 3 Ver. II, pp.71-77, 2017.
  177. R.Shobana, Incorporating Maximized Solar Power using Centered Differentiation and Steepest Descent Algorithm in Economic Dispatch Problem with Thermal and Wind Generators, International Journal of Pure And Applied Mathematics, Volume 116 No. 21, pp.275-281, 2017
  178. S.Sriramprakash, Stress Detection in Working Place, Elsevier Procedia, 7th International Conference on Advances in Computing & Communications, pp.359-366, 2017.
  179. G.Ramya, Comparative Study on Control Methods for PMSM based Wind Energy using PI and Fractional Order Controller, International Journal of Control Theory and Applications Vol.10, Issuse.29, pp. 253-263, 2017.

    180. 2016

  180. J.Rizwana, Ms.R.Jeevitha, Minimization of fuel cost in Generating Power System by using an Efficient Gravitational Search Algorithm, Discovery Engineering, Volume 4, Issue 11, 2016.
  181. J.Rizwana, Imperialist Competitive Algorithm For Minimization of losses by optimally Locating FACTS Controllers in Power System, IU-Journal of Electrical & Electronics Engineering, Volume 15, Issue 14, 2016.
  182. V. Kumar Chinnaiyan, R.Uthirasamy, Power Quality Mitigation on New DC Link Cascaded Multilevel Inverter using Space Vector Width Modulation Technique, International Journal of Printing, packaging & Allied Sciences, Vol.4, Issue.4, pp.2518-2534, December 2016.
  183. V. Kumar Chinnaiyan, J.Karpagam, R.Uthirasamy, Performance Analysis of High Power Converters for Renewable Energy Resources, International conference on Innovations in Green Energy and Healthcare Technologies, pp. 1-5, 2016
  184. S. Vivekanandan, Modeling and Simulation of Multi Input Boost Converter for Renewable Energy Applications, Journal of Scientific Engineering and Applied Science, Vol.2, Issue 2, pp.489-494, 2016.
  185. S. Vivekanandan, Design of Transformer-less Grid Connected Hybrid Photovoltaic and Wind Energy System using MPPT Algorithm, International Journal of Engineering Research and Science & Technology, 2016.
  186. D.Sathish Kumar, B.Lalitha, A.Mohamed Ibrahim, Revelation of Audio and Textual using Multicasting Technique, International Journal of Recent trends in Engineering and Research, Vol.2. Issue 11, pp.60-68, Nov 2016.
  187. V.J.Vijayalakshmi, Classification of Power Quality Events using Support Vector Machine and S-Transform, IEEE 2nd International Conference on Contemporary Computing and Informatics (IC3I), pp. 279-284, 2016.
  188. A.Mohamed Ibrahim, Condition Monitoring of Squirrel Cage Induction Machine using Neuro Controller, Journal of Electrical Engineering, Vol.6, pp.1-8, October 2016.
  189. P.K.Arun Kumar, C.K. Hemapriya, Classification of Power Quality Events using Support Vector Machine and S-Transform, IEEE 2nd International Conference on Contemporary Computing and Informatics (IC3I), pp. 279-284, 2016.

    190. 2015

  190. S.Vivekanandan, G.Saravanan, S.Krishna Prabhu, P.Kamalakannan, Performance parameters analysis of three phase full controlled converters using PSIM simulation, International Journal of Engineering Research and General Science , Volume 3, Issue No.2, pp. 273-278, April 2015.
  191. S.Vivekanandan, G.Saravanan, S.Krishna Prabhu, P.Kamalakannan, SADE based PID controller design for position control system applications, International Journal of Applied Engineering Research , Volume 10 , Issue No.29, pp. 22634-22637, 2015.
  192. B.Lalitha, CDS Quantum dots sensitized cu doped Znonano structured thin films for solar cell application, Super lattices and Microstructures, Volume 83, pp 147-156, 2015.
  193. R.Revathi, Fuzzy logic based MPPT for solar power generation system with seven level inverter, International Journal of Applied Engineering research, Volume 10, Issue No.38, pp. 29144 -29150, 2015.
  194. A.Mohamed Ibrahim, Condition Monitoring of Squirrel Cage Induction Machine using Neuro Controller, Journal of Electrical Engineering, 2015.
  195. V. Kumar Chinnaiyan, Design of two-stage soft-switched module inverter for Photovoltaic Applications, Journal of CPRI, Volume.11, Issue No.1, pp.145-154, March 2015.
  196. V. Kumar Chinnaiyan, Structure of boost DC- link cascaded Multilevel Inverter for Uninterrupted power supply, The Institution of Engineering & Technology- Power Electronics, pp.1-12, 2015.
  197. V. Kumar Chinnaiyan, J.Karpagam, Influence of irradiance, ambient conditions and AC power output on micro inverter temperature-overview, Journal Power Research, Vol.11, Issue 2, 391-400, 2015.
  198. S. Vivekanandan, G.Saravanan, S.Krishna Prabhu, P.Kamalakannan, Chaotic differential evolution algorithm based PID controller for automatic Voltage regulator system, International Journal of Scientific and Research Publications, volume 5, issue 6, pp. 1-6, June 2015.
  199. G.Saravanan, Differential Evolutionary Algorithm Based PID Controller Design for Antenna Azimuth Position Control system, International Journal of Research Studies in Science, Engineering and Technology, Volume 2, Issue 11, November 2015.
  200. D.Sathish Kumar, Automatic Weed detection and plantation of crops in Agricultural Field, S S International Journal of Multidisciplinary Research, Volume 2, Issue 6, pp.112-115, September 2015.
  201. M.Premkumar, D.Sathish Kumar, Stability Control of a Multicopter using Accelerometer, S S International Journal of Multidisciplinary Research, Volume 2, Issue 08, November 2015.
  202. M.Premkumar, D.Sathish Kumar, A.Mohamed Ibrahim, Gesture and Stability control of Quadcopter using 3-Axis Accelerometer, International Journal on Recent Technologies in Mechanical and Electrical Engineering, Volume.2, Issue No.10, October 2015.
  203. M.Premkumar, Mohamed Ibrahim, Condition Monitoring of Squirrel Cage Induction Machine using Neuro Controller, Journal of Electrical Engineering, 2015.
  204. B.Lalitha, Semi-Autonomous Coconut Harvesting Robot, International Journal on Recent Technologies in Mechanical and Electronics Engineering, Volume 2, Issue 10, October 2015.
  205. V.J.Vijayalakshmi, Single-Objective Optimization of Profit and Emission Under Deregulated Environment, Procedia Technology, Elsevier, 2015.
  206. V.J.Vijayalakshmi, Dual Phase analysis based linear regression trained Neural network for selected harmonic elimination in a multilevel inverter, International Journal of Applied Engineering research, Volume 10, Issue No. 3, pp. 6651-6658, 2015.
  207. Mr.A.Mohamed Ibrahim , Damping of Low Frequency Oscillations using Power System Stabilizer for SMIB System, S S International Journal of Multidisciplinary Research, Volume 2, Issue 09, December 2015.
  208. P.M.Sneha Angeline, Ergonomic bicycle based torque assisting scheme, S S International Journal of Multidisciplinary Research, Volume 2, Issue 09, December 2015.
  209. P.M.Sneha Angeline, Performance Monitoring of Transformer Parameters, International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Volume 3, Issue 8, August 2015.
  210. R.Revathi, Jeevitha, Differential Evolutionary Algorithm Based PID Controller Design for Antenna Azimuth Position Control system, International Journal of Research Studies in Science, Engineering and Technology, Volume 2, Issue 11, November 2015.
  211. R.Revathi, Control of Irrigation using GSM Technology, International Journal on Recent Technologies in Mechanical and Electronics Engineering, Volume 2, Issue 11, November 2015.
  212. R.Jeevitha, Hepatitis B Disease Diagnosis Using Meta-Cognitive Neural Network and Extreme Learning Machine, International Journal of Applied Engineering Research,Volume.10, Issue No.20, 2015
  213. J.Rizwana, Minimization of losses and FACTS installation cost using proposed Differential Gravitational Search Algorithm Optimization Technique, Journal of Vibration and Control, 2015.
  214. S.Jose Infant Puvani, Optimal Positioning of Superconducting Fault Current Limiter in Smart Grid, i-manager’s Journal on Instrumentation & Control Engineering, Volume 3, Issue 1, pp. 1-8, January 2015.
  215. .R.Sowmya, Ergonomic bicycle based torque assisting scheme, S S International Journal of Multidisciplinary Research, Volume 2, Issue 09, December 2015.

    216. 2014

  216. P.Kannan, Tracking/ erosion resistance analysis of Nano-Al(OH)3 filled silicone rubber insulating materials for high voltage DC Applications, Journal of Electrical Engineering and Technology, Volume 19 Issue No. 1, pp. 355-363, 2014.
  217. D.Sathish Kumar, Transient Modelling and Analysis of Advanced Inverter Model, International Journal of Industrial Electronics and Control, Volume 6, Issue No.1, pp.15-23, 2014.
  218. M.Premkumar, Single phase module integrated converter topology for Microgrid network, International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Volume 2, issue 3, March 2014.
  219. V.J.Vijayalakshmi, Investigation of Effect on Voltage Crumples phenomenon in power system circuit stagnant synchronous compensator , Australian Journal of Basic and Applied sciences, Volume 8, Issue No. 16, pp. 34-39, 2014.
  220. V.J.Vijayalakshmi, SHE in multilevel inverters by Dual phase analysis, Australian Journal of Basic and Applied sciences, Volume 8, Issue No. 18, pp. 292-298, December 2014.
  221. V.J.Vijayalakshmi, Harmonic elimination in multilevel inverters for solar applications using dual phase analysis based Neural networks, Journal of Theoretical and Applied Information Technology ,Volume 68, Issue No. 2, pp. 287-293, SNIP:0.655, SJR:0.193, October 2014.
  222. V.J.Vijayalakshmi, Selective Harmonic Elimination for three phase voltage source inverter, American journal of Electrical and Electronics Engineering, Volume 2, Issue No.1, pp. 17-20, 2014.
  223. R.Revathi, Control Strategies for a Hybrid multilevel inverter by generalized three dimensional space vector modulation, International Journal of Emerging Researches in Engineering Science and Technology, Volume 1, Issue No.2, pp. 36-43, December 2014.
  224. R.Revathi, Maximum power point tracking in PV panel using soft computing based seeker optimization algorithm and seven level inverter configuration, International Journal of Emerging researches in Engineering science and technology, Volume 1, Issue No.1, November 2014.
  225. V.J.Vijayalakshmi, Comparision of current control strategies of shunt active power filter, Applied Mechanics and Materials, Volume 573, pp. 59-65, 2014.
  226. V.J.Vijayalakshmi, Step and search control Method to track the maximum power in wind energy conversion systems – A study, International Review on Modelling and Simulations, Volume 6, Issue 8, pp 787-895, 2014.

    227. 2013

  227. M.Prem Kumar, Unmanned multi-functional robot using Zigbee adopter network for defense application, International Journal of Advanced Research in Computer Engineering & Technology (IJARCET), Volume 2, Issue 1, pp.47-55, January 2013.
  228. B.Lalitha, A Microchip Wireless based Wearable Physiological parameters Monitoring system, International Journal of Latest Research in Science and Technology, Volume 2, Issue No. 2, pp 71-74, Mar-April 2013.
  229. B.Lalitha, Real Time Controlling and Testing in an Embedded Processor under Multitasking Environment, International Journal of Engineering Research and Development, Volume 6, Issue 8, pp 187-195, 2013.

    2022

  1. S, Dharani Kumar, and Suresh Kumar S. “Influence of Post Weld Cryogenic Treatment on the Ballistic Penetration Resistance of Friction Stir-Welded AZ31B Magnesium Alloy.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, (March 2022).
  2. Kumar, P. Manoj, Rajasekaran Saminathan, A. Sumayli, Manoj Mittal, A. S. Abishek, AS Atharsh Kumaar, Tadimarri Dinesh Kumar Reddy, and Moti Lal Rinawa. "Experimental analysis of a heat sink for electronic chipset cooling using a nano improved PCM (NIPCM)." Materials Today: Proceedings (2022).
  3. Kumar, P. Manoj, Prashant Chauhan, Amit Kumar Sharma, Moti Lal Rinawa, A. J. Rahul, M. Srinivas, and A. Tamilarasan. "Performance study on solar still using nano disbanded phase change material (NDPCM)." Materials Today: Proceedings (2022).
  4. Aravindh, M., S. Sathish, R. Ranga Raj, Alagar Karthick, V. Mohanavel, Pravin P. Patil, M. Muhibbullah, and Sameh M. Osman. "A Review on the Effect of Various Chemical Treatments on the Mechanical Properties of Renewable Fiber-Reinforced Composites." Advances in Materials Science and Engineering 2022 (2022).
  5. Mohanavel, Vinayagam, K. Ravi Kumar, T. Sathish, Palanivel Velmurugan, Alagar Karthick, M. Ravichandran, Saleh Alfarraj, Hesham S. Almoallim, Shanmugam Sureshkumar, and J. Isaac JoshuaRamesh Lalvani. "Investigation on Inorganic Salts K2TiF6 and KBF4 to Develop Nanoparticles Based TiB2 Reinforcement Aluminium Composites." Bioinorganic Chemistry and Applications 2022 (2022).
  6. Sathishkumar, M., M. Manikandan, N. Arivazhagan, B. Arulmurugan, Senthil Kumaran Selvaraj, M. Vignesh, S. Rajakumar, and S. Rajkumar. "Hot corrosion behaviour of constant and pulsed current welded Hastelloy X in Na2SO4, V2O5, and NaCl salt mixture at 900° C." Materials Research Express (2022).
  7. Senthil Kannan, N., Parameshwaran, R., Saravanakumar, P. T., Kumar, P. M., & Rinawa, M. L. (2022). Performance and Quality Improvement in a Foundry Industry using Fuzzy MCDM and Lean Methods. Arabian Journal for Science and Engineering, 1-12.
  8. Vasanthaseelan, S., E. Joel, A. E. Kabeel, R. Bharathwaaj, Ravishankar Sathyamurthy, and B. Madhu. "Multi-intractable analysis for alternative Diesel–Ethanol–Canola methyl ester ternary blend." Energy Reports 8 (2022): 455-462.
  9. Rakesh, K. M., Ramachandracharya Srinidhi, S. Gokulkumar, K. S. Nithin, S. Madhavarao, S. Sathish, Alagar Karthick, M. Muhibbullah, and Sameh M. Osman. "Experimental Study on the Sound Absorption Properties of Finger Millet Straw, Darbha, and Ripe Bulrush Fibers." Advances in Materials Science and Engineering 2021 (2021).
  10. Raj Mohan, R. Venkatraman, R, Raghuraman, S. Kumar, P. Manoj, Rinawa, Moti Lal, Subbiah, Ram, Arulmurugan, B. Rajkumar, S, Processing of Aluminium-Silicon Alloy with Metal Carbide as Reinforcement through Powder-Based Additive Manufacturing, Scanning, SCI, Hindawi, 10.1155/2022/5610333
  11. K. Ravi Kumar, V. Mohanavel, and K. Kiran, Mechanical Properties and Characterization of Polylactic Acid/Carbon Fiber Composite Fabricated by Fused Deposition Modeling, Journal of Materials Engineering and Performance, SCI, Springer, https://doi.org/10.1007/s11665-021-06566-7
  12. R. Rangaraj , S. Sathish, T. L. D. Mansadevi, R. Supriya, Raviteja Surakasi, M. Aravindh, Alagar Karthick , V. Mohanavel , M. Ravichandran , M. Muhibbullah , and Sameh M. Osman, Investigation of Weight Fraction and Alkaline Treatment on Catechu Linnaeus/Hibiscus cannabinus/Sansevieria Ehrenbergii Plant Fibers-Reinforced Epoxy Hybrid Composites, Advances in Materials Science and Engineering, Hindawi, SCI, https://doi.org/10.1155/2022/4940531, https://downloads.hindawi.com/journals/amse/2022/4940531.pdf
  13. Moti Lal Rinawa, P. Pitchandi, N. Vigneshkumar, Manoj Kumar Pasupathi, Experimental analysis of the metal roofed industrial building using nano-silica disbanded crude wax (NDCW), Materials Today: Proceedings, DOI:10.1016/j.matpr.2021.12.253
  14. M. Balaji, S.N. Dinesh, S. Raja, Ram Subbiah, P. Manoj Kumar, Lead time reduction and process enhancement for a low volume product, Materials Today: Proceedings, 2021,https://doi.org/10.1016/j.matpr.2021.12.240. (https://www.sciencedirect.com/science/article/pii/S2214785321079700)
  15. Karthikeyan S, Mohan K and Arivazhagan S Multi objective optimization of FSW process parameters to enhance the tensile strength and hardness of AA7068 welded joints, Surface Topography: Metrology and Properties, 2021, 9(4), 045010

    16. 2021

  16. Vasanthaseelan S., Joel E., A.E. Kabeel, Bharathwaaj R., Ravishankar Sathyamurthy, B. Madhu, Multi-intractable analysis for alternative Diesel–Ethanol–Canola methyl ester ternary blend, Energy Reports, Volume 8, Supplement 1, 2022, Pages 455-462, https://doi.org/10.1016/j.egyr.2021.11.051. (SCIE, IF=6.87) (https://www.sciencedirect.com/science/article/pii/S2352484721011951)
  17. Nitish Kaushik, P. Saravanakumar, S. Dhanasekhar, Rajasekaran Saminathan, Moti Lal Rinawa, Ram Subbiah, Rajneesh Sharma, P. Manoj Kumar, Thermal analysis of a double-glazing window using a Nano-Disbanded Phase Changing Material (NDPCM), Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.11.537 (https://www.sciencedirect.com/science/article/pii/S221478532107560X)
  18. D. Ramya, A. Krishnakumari, P.T. Dineshkumar, Mudit Prakash Srivastava, L. Vadivel Kannan, G. Puthilibai, P. Manoj Kumar, Investigating the influence of nanoparticle disbanded phase changing material (NDPCM) on the working of solar PV, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.11.419. (https://www.sciencedirect.com/science/article/pii/S2214785321074423)
  19. Prakash K , Subramaniyan , Chandrasekaran , Kalidasan , Amarkarthik , Manoj Kumar , Saravanakumar, Experimental Analysis of the Vapour Compression Refrigeration System with Microchannel Condenser using R134a and R1234yf Refrigerant, 2021, Journal of Engg. Research, ICMMM Special Issue DOI:10.36909/jer.ICMMM.15661 (https://kuwaitjournals.org/jer/index.php/JER/article/view/15661)
  20. T. Kannan , B.Arulmurugan , L. Feroz ali , L.Rajeshkumar, performance analysis of AA3103 and AA6063 dissimilar weld joints by friction stir welding, Songklanakarin Journal of Science and Technology https://rdo.psu.ac.th/sjstweb/Ar-Press/2021Sep/18.pdf
  21. K. M. Rakesh, Ramachandracharya Srinidhi, S. Gokulkumar , K. S. Nithin, S. Madhavarao, S. Sathish, Alagar Karthick , M. Muhibbullah , and Sameh M. Osman Experimental Study on the Sound Absorption Properties of Finger Millet Straw, Darbha, and Ripe Bulrush Fibers, Advances in Materials Science and Engineering, 2021, SCI, https://doi.org/10.1155/2021/7382044
  22. Vennimalai Rajan A., Sridhar S., Senthilkumar C., Radha Krishnan B., Sundaresan R., Review – Investigation of bio-absorbable magnesium AZ91 alloy using powder metallurgy technique, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.12.125. (https://www.sciencedirect.com/science/article/pii/S2214785321078500)
  23. Anandha Moorthy A, Jegan M.M, Prakash Kanna G, Senthilkumar C, Radha Krishnan Beemaraj, Experimental investigation of Al7075 reinforced with WC and SiC metal matrix composites, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.10.239. (https://www.sciencedirect.com/science/article/pii/S2214785321067468)
  24. P. Arunkumar, N. Muthukumaran, M. Muthu Samy, L. Prabhu, R. Rajeshwari, Investigation on effect of process parameters in abrasive Jet Machining process using full factorial design, Materials Today: Proceedings, Volume 47, Part 15,2021, Pages 5395- 5400, https://doi.org/10.1016/j.matpr.2021.06.169.
  25. A. Mohan Kumar, R. Rajasekar, P. Manoj Kumar, R. Parameshwaran, Alagar Karthick, V. Mohanavel, T. Sakthi, M. Muhibbullah, "Investigation of Drilling Process Parameters of Palmyra Based Composite", Advances in Materials Science and Engineering (Hindawi, Impact Factor: 1.726), Volume 2021, Article ID 4222344, 2021. https://doi.org/10.1155/2021/4222344, (Hindawi, Impact Factor: 1.726)
  26. A. Mohan Kumar, R. Rajasekar, P. KEC, Manoj Kumar,R . Parameshwaran, Alagar Karthick, and M. Muhibbullah, Comparative analysis of Drilling Behaviour of Synthetic and Natural Fiber-Based Composites, Advances in Materials Science and Engineering, https://doi.org/10.1155/2021/9019334, (Hindawi, Impact Factor: 1.726)
  27. Moti Lal Rinawa, S.D. Anitha Selvasofia, P. Manoj Kumar*, Ram Subbiah, Rajasekaran Saminathan, Manoj Kumar Singh, P.T. Saravanakumar, G. Infant Tony Brain, Vimal Kumar Eswarlal, “Analyzing an evacuated tube solar water heating system using twin-nano/paraffin as phase change material”, Materials Today Proceedings (Elsevier Publications, Cite Score 1.8), ISSN: 2214-7853. https://doi.org/10.1016/j.matpr.2021.10.500 (Scopus Indexed)
  28. Anbuchezhian Nattappan, G. Suganya Priyadharshini, T. Satish Kumar, T. Velmurugan, M. Makeshkumar, and Haiter Lenin Allasi, Investigation into Mechanical Properties and Sliding Wear Behavior of Friction Stir Processed Surface Composite Material, Advances in Materials Science and Engineering (Hindawi, Impact Factor: 1.726), https://doi.org/10.1155/2021/8337568
  29. Naveen R, Kumar M, Mathan A, Dhushyanath D, “Investigation on the effect of stacking sequence on mechanical properties of a basalt and carbon fiber hybrid composite”, Journal of Engineering Research, November 2021. https://doi.org/10.36909/jer.ICMMM.15803. (SCIE - Impact Factor – 0.62).
  30. Pradeep Devaenthiran, Kumar Murugesan, Sangaravadivel Palaniappan, “Experimental investigation and analysis on effect of fiber orientation on mechanical properties of synthetic and natural fiber reinforced hybrid composite”, Journal of Engineering Research, November 2021. https://doi.org/10.36909/jer.ICMMM.15719. (SCIE - Impact Factor – 0.62).
  31. K. B. Prakash, Yahya Ali Fageehi, Rajasekaran Saminathan, P. Manoj Kumar , S. Saravanakumar, Ram Subbiah, B. Arulmurugan, and S Rajkumar, Influence of Fiber Volume and Fiber Length on Thermal and Flexural Properties of a Hybrid Natural Polymer Composite Prepared with Banana Stem, Pineapple Leaf, and S-Glass, Advances in Materials Science and Engineering, https://doi.org/10.1155/2021/6329400 September
  32. Selvasofia, S.A., Sarojini, E., Moulica, G., Thomas, S., Tharani, M., Saravanakumar, P.T. and Kumar, P.M., 2021. Study on the mechanical properties of the nanoconcrete using nano-TiO2 and nanoclay. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.08.242 (Scopus)
  33. Saravanakumar, P.T., Arunkumar, SP, Brailson Mansingh, B., *Kumar, P.M., Ram Subbiah, Vimal Kumar Eswarlal, 2021. Investigating the Effect of Thermal Cycling on Thermal Characteristics of the Nano-Silica based Phase Changing Material (PCM). Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.09.095 (Scopus) (industry collobarated)
  34. Francis Luther King, M., Putta Nageswara Rao, Sivakumar A, Vamsi Krishna Mamidi, Richard, S., Vijayakuma,r M., Arunprasath, K., *Kumar, P.M., 2021. Thermal Performance of a Double-Glazed Window Integrated with a Phase Change Material (PCM). Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.09.099 (Scopus)
  35. Rayed, A. M., Esakki, B., Arunkumar, P., Banik, S. C., & Aly, K. (2021). Optimization of UAV structure and evaluation of vibrational and fatigue characteristics through simulation studies. International Journal for Simulation and Multidisciplinary Design Optimization, 12, 17. (Scopus)
  36. Yuvaraj K P, Sowmya S , Anandkumar R , Sudarvizhi D, Balaji D, Hari Shankar S B , Paalpandi K , Gokularaman B. (2021). Role of tool pin profile and rotational speed on mechanical properties and microstructural behaviour of friction stir welded AA7075- T651 and AA6061 Dissimilar Alloy Joints. Design Engineering, 13852-13860. (Scopus)
  37. V.Bhuvaneswari L.Rajeshkumar, K.Nimel Sworna Ross, Influence of bioceramic reinforcement on tribological behaviour of aluminium alloy metal matrix composites: Experimental study and analysis, Journal of Materials Research and Technology, https://doi.org/10.1016/j.jmrt.2021.09.090 (SCI)
  38. K Ravi Kumar, Nisha Soms, S. Selvakumar & V.S. Sreebalaji (2021): Investigation and optimization of machining through hole by abrasive water jet machining in AA6063/Bagasseash/TiN hybrid composites, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2021.1954194, Taylor & Francis, SCI, IF=4.616
  39. Mohan Kumar, R. Rajasekar, Manoj Kumar,R, Parameshwaran, Alagar Karthick, M. Muhibbullah, Comparative analysis of Drilling Behavior of Synthetic and Natural Fiber-Based Composites. Advances in Materials Science and Engineering .https://www.hindawi.com/journals/amse/20.21/9019334/
  40. Mohan Kumar, R. Rajasekar, Manoj Kumar,R, Alagar Karthick, V. Mohanavel, T. Sakthi, M. Muhibbullah,. Investigation of Drilling Process Parameters of Palmyra Based Composite. Advances in Materials Science and Engineering https://www.hindawi.com/journals/amse/2021/4222344/.
  41. Moti Lal Rinawa, S.D. Anitha Selvasofia, P. Manoj Kumar, Analyzing an evacuated tube solar water heating system using twin-nano/paraffin as phase change material. Materials Today Proceedings. https://www.sciencedirect.com/science/article/pii/S2214785321071224#!.
  42. Anbuchezhian Nattappan, G. Suganya Priyadharshini, T. Satish Kumar, T. Velmurugan, M. Makeshkumar, and Haiter Lenin Allasi. Investigation into Mechanical Properties and Sliding Wear Behavior of Friction Stir Processed Surface Composite Material. https://www.hindawi.com/journals/amse/2021/8337568/.
  43. Devarajan, Balaji, R. Saravanakumar, S. Sivalingam, V. Bhuvaneswari, Fatemeh Karimi, and L. Rajeshkumar. "Catalyst derived from wastes for biofuel production: a critical review and patent landscape analysis." Applied Nanoscience (2021): 1-25.
  44. Ramesh, Mari, Krishnaswamy Marimuthu, Palanisamy Karuppuswamy, and LakshmiNarasimhan Rajeshkumar. "Microstructure and properties of YSZ-Al2O3 functional ceramic thermal barrier coatings for military applications." Boletín de la Sociedad Española de Cerámica y Vidrio (2021).
  45. Ramesh, M., L. Rajeshkumar, and R. Bhoopathi. "Carbon substrates: a review on fabrication, properties and applications." Carbon Letters (2021): 1-24.
  46. Mahendran, R., P. Rajkumar, L. Nirmal Raj, S. Karthikeyan, and L. Rajeshkumar. "Effect of deep cryogenic treatment on tool life of multilayer coated carbide inserts by shoulder milling of EN8 steel." Journal of the Brazilian Society of Mechanical Sciences and Engineering 43, no. 8 (2021): 1-11.
  47. Rufuss, D. Dsilva Winfred, S. Arulvel, V. Anil Kumar, P. A. Davies, T. Arunkumar, Ravishankar Sathyamurthy, A. E. Kabeel et al. "Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination." Renewable Energy 181 (2022): 219-234.
  48. Arun Kumar, S., P. Suresh Mohan Kumar, Ravishankar Sathyamurthy, and A. Muthu Manokar. "A comparative analysis of the role of carbon dioxide in multi-slope solar stills." International Journal of Ambient Energy (2021): 1-10.
  49. Abd Elnaby Kabeel, Paul Durai Leon Dharmadurai, Sathiyaseelan Vasanthaseelan, Ravishankar Sathyamurthy, Bharathwaaj Ramani, Athikesavan Muthu Manokar and Ali Chamkha, “Experimental studies on natural convection open and closed solar drying using external reflector.” Environmental Science and Pollution Research (2021)
  50. GaneshKumar, Poongavanam, Duraiswamy Sakthivadivel, Rajendran Prabakaran, Shanmugarajan Vigneswaran, Manivannan SakthiPriya, Amrit Kumar Thakur, Ravishankar Sathyamurthy, and Sung Chul Kim. "Exploring the thermo-physical characteristic of novel multi-wall carbon nanotube—Therminol-55-based nanofluids for solar-thermal applications." Environmental Science and Pollution Research (2021): 1-12.
  51. Kumar, Poongavanam Ganesh, Shunmugharajan Vigneswaran, Megaraj Meikandan, Duraisamy Sakthivadivel, Mohammad Salman, Amrit Kumar Thakur, Ravishankar Sathyamurthy, and Sung Chul Kim. "Exploring the photo-thermal conversion behavior and extinction coefficient of activated carbon nanofluids for direct absorption solar collector applications." Environmental Science and Pollution Research (2021): 1-13.
  52. Bhuvaneswari, V., L. Rajeshkumar, and K. Nimel Sworna Ross. "Influence of bioceramic reinforcement on tribological behaviour of aluminium alloy metal matrix composites: Experimental study and analysis." Journal of Materials Research and Technology (2021).
  53. Rafeek, Mohamed Thalib Mohamed, Vimala Muthu, Muthu Manokar Athikesavan, Ravishankar Sathyamurthy, and Abd Elnaby Kabeel. "Experimental investigation of an active inclined solar panel absorber solar still—energy and exergy analysis." Environmental Science and Pollution Research (2021): 1-14.
  54. Dhanapal, Balaji, Ravishankar Sathyamurthy, Abd Elnaby Kabeel, and Amrit Kumar Thakur. "Optimization of thermal efficiency on solar parabolic collectors using phase change materials—experimental and numerical study." Environmental Science and Pollution Research (2021): 1-14.
  55. Elsheikh, Ammar H., T. Muthuramalingam, S. Shanmugan, Ahmed Mohamed Mahmoud Ibrahim, B. Ramesh, Ahmed B. Khoshaim, Essam B. Moustafa, Badr Bedairi, Hitesh Punchal, and Ravishankar Sathyamurthy. "Fine-tuned artificial intelligence model using pigeon optimizer for prediction of residual stresses during turning of Inconel 718." Journal of Materials Research and Technology (2021).
  56. Thakur, Amrit Kumar, Ravishankar Sathyamurthy, R. Velraj, R. Saidur, and Jang-Yeon Hwang. "Augmented performance of solar desalination unit by utilization of nano-silicon coated glass cover for promoting drop-wise condensation." Desalination 515 (2021): 115191.
  57. Thakur, Amrit Kumar, Ravishankar Sathyamurthy, R. Velraj, I. Lynch, R. Saidur, A. K. Pandey, Swellam W. Sharshir, Zhenjun Ma, P. GaneshKumar, and A. E. Kabeel. "Sea-water desalination using a desalting unit integrated with a parabolic trough collector and activated carbon pellets as energy storage medium." Desalination 516 (2021): 115217.
  58. Rufuss, D. Dsilva Winfred, S. Arulvel, V. Anil Kumar, P. A. Davies, T. Arunkumar, Ravishankar Sathyamurthy, A. E. Kabeel et al. "Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination." Renewable Energy 181 (2022): 219-234.
  59. Sathish, S, Prabhu, L, Gokulkumar, S. Karthi, N, Balaji, D, Vigneshkumar, N. Extraction, Treatment and Applications of Natural Fibers for Bio-Composites – A Critical Review, International Polymer Processing, 2021, SCI, IF-0.781
  60. Anandkumar, R., S. Ramesh Babu, and Ravishankar Sathyamurthy. "Investigations on the Mechanical Properties of Natural Fiber Granulated Composite Using Hybrid Additive Manufacturing: A Novel Approach." Advances in Materials Science and Engineering 2021 (2021).
  61. Senthil kumar, C, Manojkumar,P. Experimental analysis on inactive region of evacuvated tube solar collector using twisted tapes, Materials Today Proceedings (2021). (Scopus)
  62. Kumar, M., C. Senthilkumar, E. Joel, S. Vasanthaseelan, and M. Logeaswaran. "Effect of WS2 and Redmud reinforcements on mechanical behaviour of Al6061-T6 surface composite." Materials Today: Proceedings (2021). (Scopus)
  63. Kumar, P. Manoj, C. Senthil Kumar, K. Muralidharan, Y. Muniratnam, K. Abraham, V. Manikandan, P. Michael Joseph Stalin, and S. Jeevan Prasanth. "Augmenting the performance of conventional solar still through the nano-doped black paint (NDBP) coating on absorber." Materials Today: Proceedings (2021). (Scopus)
  64. Udhayakumar.N, An Experimental Study on Emission Characteristics in Compression Ignition Engine with Silver and Zinc Coated Catalytic Converter" has been accepted for publication, Materials Today: Proceedings. April 2021 (Scopus)
  65. Arulmurugan, B Balaji, D Rajkumar, S, Kamaraj, M, Mageshwaran, V, Sathishkumar, M; Manikanda, M, Arivazhagan N, Influence of filler wire and welding process to mitigate the microsegregation of alloy C2000 using continuous and pulsed current gas tungsten arc welding techniques, Journal of Materials Engineering and Performance, (2021): 1-18. Springer, impact factor 1.652, SCI
  66. Sabarinathan, P., V. E. Annamalai, and P. Sangeetha. "Mechanical and Abrasion Resistance Properties of Concrete Containing Recycled Abrasive Waste as Partial Replacement of Fine Aggregate." Arabian Journal for Science and Engineering (2021): 1-10. Impact Factor: 1.711, Springer (SCI) https://doi.org/10.1007/s13369-021-05649-w
  67. Prakash, K. B., C. Subramaniayan, M. Chandrasekaran, P. Manoj Kumar, and S. Saravanakumar. "Development of mathematical model to study the effect of indoor air quality parameters and optimization using response surface methodology." Materials Today: Proceedings (2021). March (Scopus) https://doi.org/10.1016/j.matpr.2021.03.087
  68. Babu, P. Nikhil, D. Mohankumar, P. Manoj Kumar, M. Makeshkumar, M. Gokulnath, K. Gurubalaji, G. Harrish, and M. Ashok. "Energy efficient refrigeration system with simultaneous heating and cooling." Materials Today: Proceedings (2021).https://doi.org/10.1016/j.matpr.2021.03.072
  69. Kumar, M., Senthilkumar, C., Joel, E., Vasanthaseelan, S., Logeaswaran, M. "Effect of DMLS Process on Mechanical and Tribological Behavior of Alsi10mg Alloy and its Process Optimization Using GRA.” Materials Today Proceedings (accepted for publication), March 2021.
  70. Manojkumar, S., and M. Kumar. "Elimination of visor defects using 7 QC tools." Materials Today: Proceedings (2021).
  71. Arulmurugan, B., M. Sathishkumar, D. Balaji, K. Muralikrishnan, S. Pranesh, V. Praveen, K. Praveen Kumar, N. Arivazhagan, and M. Manikandan. "Development of arc welding technique to preclude microsegregation in the dissimilar joint of Alloy C-2000 and C-276." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2021): 09544089211000011.. https://doi.org/10.1177/09544089211000011 (SCI)
  72. Arulmurugan, B., M. Sathish Kumar, T. Kannan, S. Karuppiah, N. Kumaraguru, E. Ponsundar, G. Ragu, and M. Manikandan. "Investigation on mechanical and microstructure characteristics of nickel based C-2000 super alloy using laser beam welding." Materials Today: Proceedings 43 (2021): 3044-3049. (Scopus)
  73. Makeshkumar, M., S. R. Surender, R. Madesh, M. Sasi Kumar, and K. P. Shankar. "Investigation on surface modified Al7075 with niobium by friction stir processing." Materials Today: Proceedings (2021) https://doi.org/10.1016/j.matpr.2021.01.094. (Scopus)
  74. Karthi, N., K. Kumaresan, G. Rajeshkumar, S. Gokulkumar, and S. Sathish. "Tribological and Thermo-Mechanical Performance of Chemically Modified Musa Acuminata/Corchorus Capsularis Reinforced Hybrid Composites." Journal of Natural Fibers (2021): 1-14.. https://doi.org/10.1080/15440478.2020.1870614 (SCI)
  75. Prabhu, L., V. Krishnaraj, S. Sathish, S. Gokulkumar, N. Karthi, L. Rajeshkumar, D. Balaji, N. Vigneshkumar, and K. S. Elango. "A review on natural fiber reinforced hybrid composites: chemical treatments, manufacturing methods and potential applications." Materials Today: Proceedings (2021). (Scopus)
  76. Karthi, N., K. Kumaresan, S. Sathish, L. Prabhu, S. Gokulkumar, D. Balaji, N. Vigneshkumar et al. "Effect of weight fraction on the mechanical properties of flax and jute fibers reinforced epoxy hybrid composites." Materials Today: Proceedings (2021). (Scopus)
  77. Gokulkumar, S., P. R. Thyla, S. Sathish, N. Karthi, L. Prabhu, P. Vignesh, R. Vishnu, K. Srikanth, and S. Vishnu Prasath. "Acoustical and mechanical optimization of Camellia Sinensis/Ananas Comosus/GFRP/Epoxy composites by TOPSIS & Weighted Aggregates Sum Product Assessment method." Materials Today: Proceedings (2021). https://doi.org/10.1016/j.matpr.2020.12.998 (Scopus)
  78. Mohankumar D, Shashank, Pazhaniappan Y, Nithesh Kumar RA, Ragul R, Manoj Kumar P, Nikhil Babu P, "Computational study of heat-transfer in extended surfaces with various geometries”, IOP Conf. Ser.: Mater. Sci. Eng. Vol.1059, pp. 012055. (Scopus)
  79. P. Manoj Kumar, S. Arunthathi, S. Jeevan Prasanth, T. Aswin, A. Anish Antony, Deepak Daniel, D. Mohankumar, P. Nikhil Babu (2021), Investigation on a desiccant based solar water recuperator for generating water from atmospheric air, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.12.506. (Scopus)
  80. P. Manoj Kumar, D. Sudarvizhi, P. Michael Joseph Stalin, A. Aarif, R. Abhinandhana, A. Renuprasanth, V. Sathya, N. Thirukkural Ezhilan (2021), Thermal characteristics analysis of a phase change material under the influence of nanoparticles, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.12.505 (Scopus)
  81. Kumar, P. Manoj, D. Sudarvizhi, K. B. Prakash, A. M. Anupradeepa, S. Boomiha Raj, S. Shanmathi, K. Sumithra, and S. Surya. "Investigating a single slope solar still with a nano-phase change material." Materials Today: Proceedings (2021). https://doi.org/10.1016/j.matpr.2020.12.804 (Scopus)
  82. Sathish, S., N. Karthi, L. Prabhu, S. Gokulkumar, D. Balaji, N. Vigneshkumar, TS Ajeem Farhan, A. AkilKumar, and V. P. Dinesh. "A review of natural fiber composites: Extraction methods, chemical treatments and applications." Materials Today: Proceedings (2021)., https://doi.org/10.1016/j.matpr.2020.12.1105. (Scopus)
  83. Bhuvaneswari, V., M. Priyadharshini, C. Deepa, D. Balaji, L. Rajeshkumar, and M. Ramesh. "Deep learning for material synthesis and manufacturing systems: A review." Materials Today: Proceedings (2021)., https://doi.org/10.1016/j.matpr.2020.11.351. (Scopus)
  84. Selvakumar, S., V. S. Sreebalaji, and K. Ravikumar. "Machinability Analysis and Optimization in Micro turning on tool wear for Titanium Alloy." Materials and Manufacturing Processes (2021): 1-11., DOI: 10.1080/10426914.2020.1866198 (WoS, IF: 3.046, Q2)

    85. 2020

  85. Kumar, K. Ravi, T. Pridhar, and S. C. Vettivel. "Influence on Mechanical Behaviour and Characterization of A6063/Bagasse and Titanium Nitride Hybrid Composites." Transactions of the Indian Institute of Metals 74, no. 2 (2021): 473-486. https://doi.org/10.1007/s12666-020-02143-z
  86. Rajesh kumar, L., A. Saravanakumar, V. Bhuvaneswari, M. P. Jithin Karunan, N. Karthick Raja, and P. Karthi. "Tribological behaviour of AA2219/MOS2 metal matrix composites under lubrication." In AIP Conference Proceedings, vol. 2207, no. 1, p. 020005. AIP Publishing LLC, 2020. https://doi.org/10.1063/5.0000042. (Scopus)
  87. Rajesh kumar, L., S. Sivalingam, K. Prashanth, and K. Rajkumar. "Design, analysis and optimization of steering knuckle for all terrain vehicles." In AIP Conference Proceedings, vol. 2207, no. 1, p. 020003. AIP Publishing LLC, 2020. https://doi.org/10.1063/5.0000044 (Scopus)
  88. Saravanakumar, A., L. Rajeshkumar, N. S. Sanjay kumar, R. Sivakumar, S. Sriramthilak, and R. Vignesh. "Multi response optimization of aluminium alloy machining using full factorial design of experiments." In AIP Conference Proceedings, vol. 2207, no. 1, p. 020002. AIP Publishing LLC, 2020. https://doi.org/10.1063/5.0000221 (Scopus)
  89. Gokulkumar, S., P. R. Thyla, R. ArunRamnath, and N. Karthi. "Acoustical analysis and drilling process optimization of camellia sinensis/ananas comosus/GFRP/epoxy composites by TOPSIS for indoor applications." Journal of Natural Fibers (2020): 1-18.https://doi.org/10.1080/15440478.2020.1726240 (WoS, IF: 2.624).
  90. Rajesh Kumar, L & Amirthagadeswaran, K. S. "Corrosion and wear behaviour of nano Al2O3 reinforced copper metal matrix composites synthesized by high energy ball milling." Particulate Science and Technology (2019)., doi: 10.1082/+. (Scopus and WoS) (IF:1.619)
  91. Kumar, P. Manoj, K. Mylsamy, K. B. Prakash, M. Nithish, and R. Anandkumar. "Investigating thermal properties of Nanoparticle Dispersed Paraffin (NDP) as phase change material for thermal energy storage." Materials Today: Proceedings (2020), https://doi.org/10.1016/j.matpr.2020.02.800 (Scopus).
  92. Kumar, P. Manoj, R. Anandkumar K. Mylsamy and K. B. Prakash. "Experimental investigation on thermal conductivity of nanoparticle dispersed paraffin (NDP)." Materials Today: Proceedings (2020), https://doi.org/10.1016/j.matpr.2020.02.798. (Scopus).
  93. Kumar, P. Manoj, R. Anandkumar, D. Sudarvizhi, K. Mylsamy, and M. Nithish. "Experimental and Theoretical Investigations on Thermal Conductivity of the Paraffin Wax using CuO Nanoparticles." Materials Today: Proceedings 22 (2020): 1987-1993 (Scopus).
  94. Kumar, P. Manoj, K. Mylsamy, P. T. Saravanakumar, R. Anandkumar, and A. Pranav. "Experimental Study on Thermal Properties of Nano-TiO2 Embedded Paraffin (NEP) for Thermal Energy Storage Applications." Materials Today: Proceedings 22 (2020): 2153-2159. (Scopus).
  95. Sumesh, K. R., and K. Kanthavel. "Effect of TiO2 nano-filler in mechanical and free vibration damping behavior of hybrid natural fiber composites." Journal of the Brazilian Society of Mechanical Sciences and Engineering 42, no. 4 (2020). [WoS, IF: 1.755]
  96. Chelladurai, S. J. S., and R. Arthanari. "Prediction of hardness of stir cast LM13 aluminum alloy‐copper coated short steel fiber reinforced composites using response surface methodology." Materialwissenschaft und Werkstofftechnik 51, no. 2 (2020): 221-229. [Scopus and WoS, IF 0.556]
  97. Srinivasan, R., T. Pridhar, R. Kirubakaran, and A. Ramesh. "Prediction of wear strength of squeeze cast aluminium hybrid metal matrix composites using response surface methodology." Materials Today: Proceedings 27 (2020): 1806-1811. [Scopus]
  98. Sumesh, K. R., K. Kanthavel, and V. Kavimani. "Machinability of hybrid natural fiber reinforced composites with cellulose micro filler incorporation." Journal of Composite Materials (2020): 0021998320918020 (WoS, IF: 1.972).
  99. Gokulkumar, S., P. R. Thyla, L. Prabhu, S. Sathish, and N. Karthi. "A comparative study on epoxy based composites filled with pineapple/areca/ramie hybridized with industrial tea leaf wastes/GFRP." Materials Today: Proceedings 27 (2020): 2474-2476.
  100. Ramesh, M., C. Deepa, L. Rajesh Kumar, M. R. Sanjay, and Suchart Siengchin. "Life-cycle and environmental impact assessments on processing of plant fibres and its bio-composites: A critical review." Journal of Industrial Textiles (2020): 1528083720924730. https://doi.org/10.1177/1528083720924730. (WoS, IF: 2.01)
  101. L.Rajesh kumar, Saravanakumar, A., V. Bhuvaneswari, and G. Gokul. "Optimization of wear behaviour for AA2219-MoS2 metal matrix composites in dry and lubricated condition." Materials Today: Proceedings 27 (2020): 2645-2649.. https://doi.org/10.1016/j.matpr.2019.11.087 (Scopus).
  102. Karthi, N., K. Kumaresan, S. Sathish, S. Gokulkumar, L. Prabhu, and N. Vigneshkumar. "An overview: Natural fiber reinforced hybrid composites, chemical treatments and application areas." Materials today: proceedings 27 (2020): 2828-2834. https://doi.org/10.1016/j.matpr.2020.01.011 (Scopus).
  103. Sathish, S., K. Kumaresan, L. Prabhu, S. Gokulkumar, N. Karthi, and N. Vigneshkumar. "Experimental investigation of mechanical and morphological properties of flax fiber reinforced epoxy composites incorporating SiC and Al2O3." Materials Today: Proceedings 27 (2020): 2249-2253. (Scopus). July – December 2020
  104. Anand Kumar R, Dinesh.S.N, Pranav.A, and Nithish.M. "Applying Lean Thinking For Effective Utilization of Resources in Education Sector." Waffen-Und Kostumkunde Journal, Volume 11 (6) (2020), pp. 218-225 (Scopus).
  105. N Udhayakumar, S. Ramesh Babu, M P Ragulraja, E P Ranganathan,M Santhoshkannan, M Ranjith Kumar, "An Experimental Study of Emission Characteristics in Compression Ignition Engine with Diesel – Ethanol Blend Using Surfactant” Waffen-Und Kostumkunde Journal, Volume 11 (7) (2020), pp. 69-75 (Scopus).
  106. Shanmugaraja, M., Mr R. Bharathwaaj, Mr E. Joel, and Mr S. Vasanthaseelan. "Augmenting Productivity Using TQM Principles." (Scopus)
  107. Vasanthaseelan, S., G. Jaya Surya, L. Karthi, G. Karthikeyan, and M. Mohanraj. "Design and Fabrication of Integrated Electronic Traffic Monitoring System For Commercial Vehicle." (Scopus)
  108. Joshuva, A., R. Sathish Kumar, S. Sivakumar, G. Deenadayalan, and R. Vishnuvardhan. "An insight on VMD for diagnosing wind turbine blade faults using C4. 5 as feature selection and discriminating through multilayer perceptron." Alexandria Engineering Journal 59, no. 5 (2020): 3863-3879. (WoS, IF: 3.3)
  109. Sumesh, K. R., and K. Kanthavel. "Optimizing various parameters influencing mechanical properties of banana/coir natural fiber composites using grey relational analysis and artificial neural network models." Journal of Industrial Textiles (2020): doi: 10.1177/1528083720930304. (WoS, IF:2.01)
  110. Sumesh, K. R., and K. Kanthavel. "Grey relational optimization for factors influencing tensile, flexural, and impact properties of hybrid sisal banana fiber epoxy composites." Journal of Industrial Textiles (2020): doi: 10.1177/1528083720928501. (WoS, IF:2.01).
  111. Saravanakumar, A., Rajeshkumar, L., Balaji, D., Jithin Karunan M.P., Prediction of Wear Characteristics of AA2219-Gr Matrix Composites Using GRNN and Taguchi-Based Approach. Arab J Sci Eng, 45(11), 9549-9557 (2020). https://doi.org/10.1007/s13369-020-04817-8. (WoS, IF: 1.711)
  112. Kumar, P. Manoj, and K. Mylsamy. "A comprehensive study on thermal storage characteristics of nano-CeO2 embedded phase change material and its influence on the performance of evacuated tube solar water heater." Renewable Energy 162 (2020): 662-676. https://doi.org/10.1016/j.renene.2020.08.122. (WoS, IF:6.274)
  113. Manoj Kumar, P., K. Mylsamy, Karthick Alagar, and K. Sudhakar. "Investigations on an evacuated tube solar water heater using hybrid-nano based organic phase change material." International Journal of Green Energy 17, no. 13 (2020): 872-883. https://doi.org/10.1080/15435075.2020.1809426. (WoS, IF: 1.388)
  114. Karthick, Alagar, Muthu Manokar Athikesavan, Manoj Kumar Pasupathi, Nallapaneni Manoj Kumar, Shauhrat S. Chopra, and Aritra Ghosh. "Investigation of inorganic phase change material for a semi-transparent photovoltaic (STPV) module." Energies 13, no. 14 (2020): 3582.. (WoS, IF: 2.676)
  115. Arulmurugan.B, S. Rajkumar, Lijalem Mulugeta & Nega Tesfie, "Investigation on Effect of Turbulence Intensity and Rib Tabulator in Moisture Diffusion through Membrane”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 23, pp.11711-11720 (Scopus)
  116. Arulmurugan, Balasubramanian, Mathiyazhan Sathish Kumar, Devarajan Balaji, Shankarlal Sathish, Sivan Rajkumar, Natarajan Arivazhagan, C. D. Naiju, and Manoharan Manikandan. Investigation on the Effect of Pulsed Frequency on Microstructure and Hardness of Alloy C-2000 by Current Pulsing. No. 2020-28-0420. SAE Technical Paper, 2020. doi:10.4271/2020-28-0420. (Scopus)
  117. Prabhu, L., V. Krishnaraj, S. Gokulkumar, S. Sathish, M. R. Sanjay, and S. Siengchin. "Mechanical, chemical and sound absorption properties of glass/kenaf/waste tea leaf fiber-reinforced hybrid epoxy composites." Journal of Industrial Textiles (2020): 1528083720957392. https://doi.org/10.1177/1528083720957392. (WoS, IF: 2.01)
  118. Pasupathi, Manoj Kumar, Karthick Alagar, Matheswaran Mm, and Ghosh Aritra. "Characterization of Hybrid-nano/Paraffin Organic Phase Change Material for Thermal Energy Storage Applications in Solar Thermal Systems." Energies 13, no. 19 (2020): 5079.. (WoS, IF: 2.676)
  119. P Babu, P. Nikhil, V. Dhinesh, A. Ashif, Aswin V. Vijay, and D. Mohankumar. "Design and fabrication of NACA 0018 straight bladed vertical axis wind turbine." In IOP Conference Series: Earth and Environmental Science, vol. 573, no. 1, p. 012047. IOP Publishing, 2020. (Scopus)
  120. Rajeshkumar, L., R. Suriyanarayanan, K. Shree Hari, S. Venkatesh Babu, V. Bhuvaneswari, and MP Jithin Karunan. "Influence of Boron Carbide Addition on Particle Size of Copper Zinc Alloys Synthesized by Powder Metallurgy." In IOP Conference Series: Materials Science and Engineering, vol. 954, no. 1, p. 012008. IOP Publishing, 2020. (Scopus).
  121. Rajeshkumar, L., V. Bhuvaneswari, B. Pradeepraj, and C. Palanivel. "Design and Optimization of Static Characteristics for a Steering System in an ATV." In IOP Conference Series: Materials Science and Engineering, vol. 954, no. 1, p. 012009. IOP Publishing, 2020. (Scopus).
  122. Prabhu, L., V. Krishnaraj, S. Sathish, S. Gokulkumar, M. R. Sanjay, and S. Siengchin. "Mechanical and Acoustic Properties of Alkali-Treated Sansevieria ehrenbergii/Camellia sinensis Fiber–Reinforced Hybrid Epoxy Composites: Incorporation of Glass Fiber Hybridization." Applied Composite Materials (2020): 1-19. (WoS, IF: 2.16)
  123. Balaji, D., M. Ramesh, T. Kannan, S. Deepan, V. Bhuvaneswari, and L. Rajeshkumar. "Experimental investigation on mechanical properties of banana/snake grass fiber reinforced hybrid composites." Materials Today: Proceedings 42 (2021): 350-355. https://doi.org/10.1016/j.matpr.2020.09.548. (Scopus)
  124. Gunasekaran, N., M. Shanmugaraja, R. Bharathwaaj, J. Shilpha Dharshini, M. Vivishnu Kumar, and PS Yogesh Kumar. "ANALYSIS AND REDUCTION OF HEAT TRANSFER IN A FURNACE OF REFINERY." In Journal of Physics: Conference Series, vol. 1706, no. 1, p. 012176. IOP Publishing, 2020.. (Scopus)
  125. Rajeshkumara, L., and D. Balajia. "Study of Mechanical and Tribological Properties of Bio-Ceramics Reinforced Aluminium Alloy Composites." Solid State Technology 63, no. 5 (2020): 4552-4560.. (Scopus)
  126. Kumar, P. Manoj, G. Mukesh, S. Naresh, D. Mohana Nitthilan, and R. Kishore Kumar. "Study on Performance Enhancement of SPV Panel Incorporating a Nanocomposite PCM as Thermal Regulator." In Materials, Design, and Manufacturing for Sustainable Environment, pp. 587-597. Springer, Singapore, 2021. https://doi.org/10.1007/978-981-15-9809-8_44. (Scopus)
  127. Anbuchezhian, N., Balaji Devarajan, Ms. A. K. Priya, and L. Rajeshkumar. "Machine Learning Frameworks for Additive Manufacturing–A Review." Solid State Technology 63, no. 6 (2020): 12310-12319. (Scopus)
  128. Kumar, R. Sathish, S. Sivakumar, A. Joshuva, G. Deenadayalan, and R. Vishnuvardhan. "Bio-fuel production from Martynia annua L. seeds using slow pyrolysis reactor and its effects on diesel engine performance, combustion and emission characteristics." Energy (2020): 119327. (WoS, IF: 6.082)
  129. Madesh, R., M. Makeshkumar, S. R. Surender, K. P. Shankar, and M. Sasi Kumar. "Performance characteristics of GMAW process parameters of multi-bead overlap weld claddings." In IOP Conference Series: Materials Science and Engineering, vol. 988, no. 1, p. 012013. IOP Publishing, 2020. (Scopus)
  130. Kumar, R. Anand, S. SS Sindhu, M. Kumaresan, S. Sathish, N. Karthi, J. Vignesh, S. P. Sidharth, K. V. Shreedhar, and P. Subash Rajasekar. "Wear performance and Mechanical properties of Unidirectional Sisal/Carbon/Flax Hybrid Reinforced Epoxy Composites." In IOP Conference Series: Materials Science and Engineering, vol. 988, no. 1, p. 012010. IOP Publishing, 2020. (Scopus)
  131. Ramesh, M., C. Deepa, M. Tamil Selvan, L. Rajeshkumar, D. Balaji, and V. Bhuvaneswari. "Mechanical and water absorption properties of Calotropis gigantea plant fibers reinforced polymer composites." Materials Today: Proceedings (2020). https://doi.org/10.1016/j.matpr.2020.11.480. (Scopus)
  132. Chandrika, V. S., Alagar Karthick, Nallapaneni Manoj Kumar, P. Manoj Kumar, B. Stalin, and M. Ravichandran. "Experimental analysis of solar concrete collector for residential buildings." International Journal of Green Energy 18, no. 6 (2021): 615-623. https://doi.org/10.1080/15435075.2021.1875468
  133. Prabhu, L., Krishnaraj, V., Sathish, S., Gokulkumar, S., Karthi, N., Rajeshkumar, L., Balaji, D., Vigneshkumar, N., Elango, K.S., Karpagam, J. and Vijayalakshmi, V.J., 2021. Experimental investigation on mechanical properties of flax/banana/industrial waste tea leaf fiber reinforced hybrid polymer composites. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.02.111

    134. 2019

  134. Manoj Kumar, P., K. Mylsamy, and P. T. Saravanakumar. "Experimental investigations on thermal properties of nano-SiO2/paraffin phase change material (PCM) for solar thermal energy storage applications." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 42, no. 19 (2020): 2420-2433. (Taylor and Francis, Impact Factor: 0.894), https://doi.org/10.1080/15567036.2019.1607942 (Scopus and WoS).
  135. Kumar, P. Manoj, and K. Mylsamy. "Experimental investigation of solar water heater integrated with a nanocomposite phase change material." Journal of Thermal Analysis and Calorimetry 136, no. 1 (2019): 121-132. (Springer, Impact Factor: 2.209), Online ISSN: 1588-2926, Volume 136, Issue No. 1, April 2019, pp.121 – 132. https://doi.org/10.1007/s10973-018-7937-9. (Scopus and WoS)
  136. Kumar, P. Manoj, P. T. Saravanakumar, K. Mylsamy, P. Kishore, and K. B. Prakash. "Study on thermal conductivity of the candle making wax (CMW) using nano-TiO2 particles for thermal energy storage applications." In AIP Conference Proceedings, vol. 2128, no. 1, p. 020027. AIP Publishing LLC, 2019. https://doi.org/10.1063/1.5117935. (Scopus)
  137. Kumar, P. Manoj, R. Anandkumar, D. Sudarvizhi, K. B. Prakash, and K. Mylsamy. "Experimental investigations on thermal management and performance improvement of solar PV panel using a phase change material." In AIP Conference Proceedings, vol. 2128, no. 1, p. 020023. AIP Publishing LLC, 2019. https://doi.org/10.1063/1.5117935. (Scopus)
  138. Kishore, P., P. Manoj Kumar, and D. Dinesh. "Wear analysis of Al 5052 alloy with varying percentage of tungsten carbide." In AIP Conference Proceedings, vol. 2128, no. 1, p. 040003. AIP Publishing LLC, 2019. https://doi.org/10.1063/1.5117935. (Scopus)
  139. P.Manoj Kumar and K.Mylsamy (2019), "Performance Analysis of Evacuated Tube Collector Using Diffuse Reflectors”, Indian Journal of Environmental Protection, ISSN: 0253 – 7141, Volume 39, Issue No. 2, February 2019, pp.163 – 166. (Scopus)
  140. Sathish, S., K. Kumaresan, L. Prabhu, S. Gokulkumar, N. Karthi, and N. Vigneshkumar. "Experimental investigation of mechanical and morphological properties of flax fiber reinforced epoxy composites incorporating SiC and Al2O3." Materials Today: Proceedings 27 (2020): 2249-2253., doi.org/10.1016/j.matpr.2019.09.106.
  141. John, Aashish, Kiran Jacob Johny, Balasubramanian Arulmurugan, Sivan Rajkumar, Natarajan Arivazhagan, Chooriyaparambil Damodaran Naiju, and Manoharan Manikandan. Investigation on Microstructure and Mechanical Properties of Corrosion Resistance Alloy C-2000 Fabricated by Conventional Arc Welding Technique. No. 2019-28-0177. SAE Technical Paper, 2019. (Scopus and WoS)
  142. Prabhu, L., V. Krishnaraj, S. Gokulkumar, S. Sathish, and M. Ramesh. "Mechanical, chemical and acoustical behavior of sisal–tea waste–glass Fiber reinforced epoxy based hybrid polymer composites." Materials Today: Proceedings 16 (2019): 653-660., https://doi.org/10.1016/j.matpr.2019.05.142. (Scopus)
  143. Gokulkumar, S., P. R. Thyla, L. Prabhu, and S. Sathish. "Measuring methods of acoustic properties and influence of physical parameters on natural fibers: A review." Journal of Natural Fibers (2019)., https://doi.org/10.1080/15440478.2019.1598913. (Scopus and WoS)
  144. Prabhu, L., V. Krishnaraj, S. Sathish, S. GokulKumar, and N. Karthi. "Study of mechanical and morphological properties of jute-tea leaf fiber reinforced hybrid composites: Effect of glass fiber hybridization." Materials Today: Proceedings 27 (2020): 2372-2375. doi.org/10.1016/j.matpr.2019.09.132.
  145. Rajesh Kumar, L & Amirthagadeswaran, KS 2019, ‘Variation of Properties of copper alumina nanocomposites synthesized by mechanical alloying’, Materials and Technology, Slovenia, doi:10.17222/mit.2018.122. (Scopus and WoS)
  146. Saravankumar, P. T., V. Suresh, V. Vijayan, and A. Godwin Antony. "Ecological effect of corn oil biofuel with SiO2 nano-additives." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 41, no. 23 (2019): 2845-2852. https://doi.org/10.1080/15567036.2019.1576079. (Scopus and WoS)
  147. Saravanakumar, P. T., D. Somasundaram, and M. M. Matheswaran. "Thermal and thermo-hydraulic analysis of arc shaped rib roughened solar air heater integrated with fins and baffles." Solar Energy 180 (2019): 360-371., https://doi.org/10.1016/j.solener.2019.01.036. (Scopus and WoS)
  148. Sengottaiyan Sivalingam, Gurusamy Sureshkannan, ‘Effect of PCGTAW on the Inconel 690 alloy with respect to microsegregation attainment in comparison with the base metal processed with autogenous welding’ (2019) doi:10.17222/mit.2018.114. (Scopus and WoS)
  149. Vasanthaseelan S, Karthikeyan S, Kumaresan N, Rajesh V,. ‘Optimization of Rubber Seed oil Biodiesel Extraction using Soxhlet Extraction’. International Journal of Mechanical and Production Engineering Research and Development; Vol.9: pp.183–190. (2019) (Scopus)
  150. Arulmurugan, B., Kunjan Modi, Amrutkar Pranit Sanjay, Patil Apurva Yashwant, N. Rickwith, C. G. Mohan, P. Subramani, M. Agilan, M. Manikandan, and N. Arivazhagan. "Effect of post-weld heat treatment on the microstructure and tensile properties of electron-beam-welded 21st century nickel-based super alloy 686." Sādhanā 44, no. 2 (2019): 38. [SCIE indexed, Springer, Annexure 1, impact factor 0.761]
  151. Gokulkumar, S., P. R. Thyla, L. Prabhu, and S. Sathish. "Characterization and comparative analysis on mechanical and acoustical properties of Camellia Sinensis/Ananas Comosus/Glass fiber hybrid polymer composites." Journal of Natural Fibers (2019): 1-17. doi.org/10.1080/15440478.2019.1675215, 1-17.
  152. Gokulkumar, S., P. R. Thyla, L. Prabhu, S. Sathish, and N. Karthi. "A comparative study on epoxy based composites filled with pineapple/areca/ramie hybridized with industrial tea leaf wastes/GFRP." Materials Today: Proceedings 27 (2020): 2474-2476. doi.org/10.1016/j.matpr.2019.09.221, 1-3.

    153. 2018

  153. K.B.Prakash, A.Amarkarthik, S.Jegadheeswaran and P.Manoj Kumar "The Performance and Exergy Analysis on Vapour Compression Refrigeration System with Micro-Channel Condenser and Thermostatic Expansion Valve", International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), ISSN(P): 2249-6890; ISSN(E): 2249-8001, Volume 8, Special Issue 7, pp.372-83. (2018), (Scopus Indexed)
  154. Saravanakumar, A., and P. Sasikumar. "Flexural behavior and microstructure of hybrid metal matrix composites." J Mater Environ Sci 9 (2018): 2951-2955.
  155. Saravanakumar, A., R. Saravanakumar, S. Sivalingam, and V. Bhuvaneswari. "Prediction capabilities of mathematical models for wear behaviour of AA2219/MgO/Gr hybrid metal matrix composites." International Journal of Mechanical and Production Engineering Research and Development 8, no. 8 (2018): 393-399. (Scopus).
  156. Avinash, A., P. Sasikumar, and A. Murugesan. "Understanding the interaction among the barriers of biodiesel production from waste cooking oil in India-an interpretive structural modeling approach." Renewable Energy 127 (2018): 678-684. (Scopus) (Wos) (EBSCO).
  157. Avinash, A., and A. Murugesan. "Prediction capabilities of mathematical models in producing a renewable fuel from waste cooking oil for sustainable energy and clean environment." Fuel 216 (2018): 322-329. (Scopus) (Wos) (EBSCO).
  158. Arulmurugan, B., and M. Manikandan. "Improvement of Metallurgical and Mechanical Properties of Gas Tungsten arc Weldments of Alloy 686 by Current Pulsing." Transactions of the Indian Institute of Metals 71, no. 12 (2018): 2953-2970. (Springer, Annexure 1, impact factor 1.07).
  159. Arulmurugan B, Manikandan M, Agilan M, Jerome S, Srikanth A, Arivarasu M, Arivazhagan N. Investigation on Metallurgical and Mechanical Properties of 21st Century Nickel-based Superalloy 686 by Electron Beam Welding Technique, Sådhanå (2018) 43:117 [SCIE indexed, Springer, Annexure 1, impact factor 0.761]
  160. Sathish, S., K. Kumaresan, L. Prabhu, and S. Gokulkumar. "Experimental investigation of mechanical and FTIR analysis of flax fiber/epoxy composites incorporating SiC, Al2O3 and graphite." Revista Romana de Materiale 48, no. 4 (2018): 476. [Scopus, WOS].
  161. Saravanakumar, A., and S. Sivalingam. "Dry Sliding wear of AA2219/Gr Metal matrix composites." Materials Today: Proceedings 5, no. 2 (2018): 8321-8327.
  162. Saravanakumar, A., S. C. Karthikeyan, and B. Dhamotharan. "Optimization of CNC Turning Parameters on Aluminum Alloy 6063 using TaguchiRobust Design." Materials Today: Proceedings 5, no. 2 (2018): 8290-8298.
  163. Saravanakumar, A., S. Dhanabal, E. Jayanand, and P. Logeshwaran. "Analysis of process parameters in surface grinding process." Materials Today: Proceedings 5, no. 2 (2018): 8131-8137. (Scopus).
  164. Arulmurugan B, Manikandan M, Investigations on Microstructure and Corrosion behavior of Superalloy 686 weldments by Electrochemical Corrosion Technique”, IOP Conf. Series: Materials Science and Engineering 310 (2018) 012071 doi:10.1088/1757-899X/310/1/012071 [Scopus indexed journal]
  165. Sathish, S., K. Kumaresan, L. Prabhu, S. Gokulkumar, S. Dinesh, and N. Karthi. "Experimental testing on mechanical properties of various natural fibers reinforced epoxy hybrid composites." Indian Journal of Science and Technology 11 (2018): 25. (Scopus).
  166. N.Karthi, S.Sathish, K.Kumaresan, L.Prabhu, S.Gokulkumar. 2018. "Enhanced Fiber Strength for Harsh Exterior Environment - An Experimental." International Journal of Mechanical and Production Engineering Research and Development (Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC PVT. LTD.)) 8 (8): 414-419 (Scopus).

    167. 2017

  167. Ramesh, Manickam, Ravi Logesh, Manivannan Manikandan, Nithyanandam Sathesh Kumar, and Damodaran Vishnu Pratap. "Mechanical and water intake properties of banana-carbon hybrid fiber reinforced polymer composites." Materials Research 20, no. 2 (2017): 365-376. (Scopus) (WoS).
  168. Bhoopathi, R., M. Ramesh, R. Rajaprasanna, G. Sasikala, and C. Deepa. "Physical properties of glass-hemp-banana hybrid fiber reinforced polymer composites." Indian J. Sci. Technol 10, no. 7 (2017): 1-7. (Scopus).
  169. Ramesh, M., and P. Sudharsan. "Experimental investigation of mechanical and morphological properties of flax-glass fiber reinforced hybrid composite using finite element analysis." Silicon 10, no. 3 (2018): 747-757. (Scopus) (WoS).
  170. Ramesh, M., K. Palanikumar, and K. Hemachandra Reddy. "Plant fibre based bio-composites: Sustainable and renewable green materials." Renewable and Sustainable Energy Reviews 79 (2017): 558-584. (Scopus) (WoS) (EBSCO).
  171. Ramesh, M., and A. Gopinath. "Measurement and analysis of thrust force in drilling sisal-glass fiber reinforced polymer composites." In IOP Conference Series: Materials Science and Engineering, vol. 197, no. 1, p. 012056. IOP Publishing, 2017. (Scopus).
  172. Avinash, A., and A. Murugesan. "Economic analysis of biodiesel production from waste cooking oil." Energy Sources, Part B: Economics, Planning, and Policy 12, no. 10 (2017): 890-894. (Scopus) (WoS)
  173. Murugesan, A., and A. Avinash. "Optimization of biodiesel production from raw and purified bio-oil." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 39, no. 10 (2017): 978-984. (Scopus) (WoS).
  174. Murugesan, A., D. Subramaniam, A. Avinash, and P. Sasikumar. "Evaluation of bio-diesel properties: a statistical approach." International Journal of Ambient Energy 38, no. 3 (2017): 273-279. (Scopus)
  175. Manikandan, M., N. Arivazhagan, M. Arivarasu, K. Mageshkumar, Deva N. Rajan, B. Arul Murugan, P. Prasanth, S. Sukumar, and R. Vimalanathan. "Analysis of metallurgical and mechanical properties of continuous and pulsed current gas tungsten arc welded alloy C-276 with duplex stainless steel." Transactions of the Indian Institute of Metals 70, no. 3 (2017): 661-669. (Scopus) (WoS).
  176. Arulmurugan, B., and M. Manikandan. "Development of welding technology for improving the metallurgical and mechanical properties of 21st century nickel based superalloy 686." Materials Science and Engineering: A 691 (2017): 126-140. (Scopus) (WoS).
  177. Sathyamoorthy, V., S. Deepan, S. P. Sathya Prasanth, and L. Prabhu. "Optimization of machining parameters for surface roughness in end milling of magnesium AM60 alloy." Indian Journal of Science and Technology 10, no. 32 (2017): 1-7. (Scopus) (Wos)
  178. S. Deepan, K. T. Shahul Gasnikhan, P. Soundiraraj and I. Rajkumar. (2017). Advancement in Clicker Machine and Die. Front. Cur. Trends. Engg. Tech. Vol. 1(2), pp. 75 – 78 (Scopus).
  179. L. Rajesh kumar, A.Saravanakumar, S.Sivalingam (2017) Dry Sliding wear of AA2219/Gr Metal matrix composites. Material today proceedings. (Scopus)
  180. Koundinya, Sandeep, and K. Sreeram. "Bio-mass utilization in high pressure cogeneration boiler." In AIP Conference Proceedings, vol. 1859, no. 1, p. 020032. AIP Publishing LLC, 2017. https://doi.org/10.1063/1.4990185 (Scopus)
  181. Anandkumar, R Babu, Balaji.D 2017. Suggestions on the Methodology of Parameters in Fused Deposition Modeling Processes. International Refereed Journal of Engineering and Science (IRJES) 6 (4), 61-63 (Scopus)
  182. Sathish, S., K. Kumaresan, L. Prabhu, and N. Vigneshkumar. "Experimental investigation on volume fraction of mechanical and physical properties of flax and bamboo fibers reinforced hybrid epoxy composites." Polymers and Polymer Composites 25, no. 3 (2017): 229-236.. (Scopus)
  183. Prabhu, L., V. Krishnaraj, S. Sathish, and V. Sathyamoorthy. "Experimental and finite element analysis of gfrp composite laminates with combined bolted and bonded joints." Indian Journal of Science and Technology 10, no. 14 (2017). (Scopus) (Wos).

    184. 2016

  184. Saravanakumar, A., and P. Sasikumar. "Dry sliding wear behaviour of Al6063/Al2O3P/GrP hybrid metal matrix composites." Journal of the Balkan Tribological Association 22, no. 2-I (2016): 1259-70. SJR : 0.22, CI : 0.71, H index : 7 (Scopus)
  185. Arunachalam, Saravanakumar, and Sasikumar Perumal. "Investigation of effect of graphite particles on drillability of metal matrix composite." Materials Science 22, no. 3 (2016): 390-396.. (Scopus)
  186. Prakash, T., P. Sasikumar, and S. Sivasankaran. "The influences of the friction stir processing on the microstructure and hardness of Al7075 aluminium sheet metal reinforced with SiC/3%[B. sub. 4] C hybrid surface nanocomposite." Advances in Natural and Applied Sciences 10, no. 6 SE (2016): 21-26.
  187. Saravanakumar, A., A. Avinash, and R. Saravanakumar. "Optimization of biodiesel production from Pungamia oil by Taguchi’s technique." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 38, no. 17 (2016): 2524-2529. (Scopus).
  188. Girubha, Jeya, Sekar Vinodh, and K. E. K. Vimal. "Application of interpretative structural modelling integrated multi criteria decision making methods for sustainable supplier selection." Journal of Modelling in Management (2016).
  189. Vimal, K. E. K., S. Vinodh, P. Brajesh, and R. Muralidharan. "Rapid prototyping process selection using multi criteria decision making considering environmental criteria and its decision support system." Rapid Prototyping Journal (2016). (Scopus) (WOS).
  190. Vimal, K. E. K., and Sekar Vinodh. "LCA integrated ANP framework for selection of sustainable manufacturing processes." Environmental Modeling & Assessment 21, no. 4 (2016): 507-516. Modeling and Assessment 10.1007/s10666-015-9490-2 (Scopus) (WOS)
  191. Sivakumar, Mayilsamy, and Periasamy Somasudaram. "Thermodynamic investigations of Zeotropic mixture of R290, R23 and R14 on three-stage auto refrigerating cascade system." Thermal Science 20, no. 6 (2016): 2073-2086. (Scopus), (WOS) (EBSCO Host).
  192. Murugesan, A., D. Subramaniam, and A. Avinash. "Heating value of biodiesel: An empirical and theoretical exploration." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 38, no. 9 (2016): 1293-1298. (Scopus).
  193. Senthil, M., K. Visagavel, and A. Avinash. "Effects of exhaust gas recirculation on emission characteristics of Mahua (Madhuca Indica) biodiesel using red mud as catalyst." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 38, no. 6 (2016): 876-881. (Scopus).
  194. Avinash, A., and P. Sasikumar. "A comprehensive study on the emission characteristics of E-diesel dual-fuel engine." Alexandria engineering journal 55, no. 1 (2016): 351-356. (Scopus).
  195. Manikandan, M., M. Arivarasu, N. Arivazhagan, T. Puneeth, N. Sivakumar, B. Arul Murugan, M. Sathishkumar, and S. Sivalingam. "High Temperature Corrosion studies on Pulsed Current Gas Tungsten Arc Welded Alloy C-276 in Molten Salt Environment." In IOP Conference Series: Materials Science and Engineering, vol. 149, no. 1, p. 012020. IOP Publishing, 2016., [ Scopus indexed journal]

    196. 2015

  196. Sivaprakasam R, Selladurai V and Sasikumar P (2015), "Integrating environmental factors in the suppliers assessment using analytic hierarchy process as a decision making tool”, Journal of Materials and Environmental Science, Vol. 6, No. 8, pp. 2097 – 2104, SNIP: 1.104 SJR : 0.37, Impact Factor :1.07, CI : 1.18, H index : 15 (Scopus).
  197. Saravanakumar A and Sasikumar P (2015), "Assessment of factors influencing burr height on the machining of particle reinforced hybrid composites”, Journal of Materials and Environmental Science, Vol. 6, No. 5, pp. 1638 – 1645., SNIP: 1.104 SJR : 0.37, Impact Factor :1.07, CI : 1.18, H index : 15 (Scopus).
  198. Saravanakumar A, Sasikumar P (2015), "Mechanical properties of multiaxially forged hybrid composite”, Applied Mechanics and Materials, Vol. 813 – 814, pp. 90 - 94 SNIP : 0.2, SJR : 0.603, Impact factor : 0.08, CI : 0.09, H Index – 15, (Scopus).
  199. Prakash T, Sivasankaran S, Sasikumar P (2015), "Mechanical and Tribological behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with Al2O3/0.5Gr Hybrid Surface Nanocomposite”, Arabian Journal of Science and Engineering (Springer Publications), Vol.40, No.2, pp. 559-569, Impact Factor : 0.367, CI : 0.43, H index : 16, (WOS), (EBSCO Host).
  200. Saravanakumar A, Sivasankaran S and Sasikumar P (2015), "Investigation of machinability of graphite particle reinforced Al-MMC”, International Journal of Applied Engineering Research (Research India Publications), Vol. 10, No. 8, pp. 6206-6209, SNIP : 0.166, SJR : 0.13, Impact Factor :0.077, CI : 0.12, H index : 5, (Scopus).
  201. Sivaprakasam R, Selladurai V and Sasikumar P (2015), "Implementation of Interpretive Structural Modelling methodology as a strategic decision making tool in a Green Supply Chain context”, Annals of Operations Research – An International Journal (Springer Publications), Vol. 233, No. 1, PP. 423 - 448. SNIP: 1.481, SJR: 1.402, Impact Factor: 1.103, CI : 1.34, H index : 65, (Scopus), (WOS), (EBSCO Host).
  202. Dhanaprabu S.S, Murugan. V, Saravanakumar R* and Deepak V (2015), "Thermodynamic analysis of a domestic refrigerator using R290 as an alternative to R134a”, International Journal of Science, Engineering and Technology Research, Vol.4, Issue 3, pp.599-605, Impact Factor : 3.2.
  203. Sivakumar M*, Somasundaram P and Thangavel P (2015), "Exergy and Performance analysis of Three Stage Auto Refrigerating Cascade (3 stage ARC) System using Zeotropic Mixture of Eco-Friendly Refrigerants”, International Review of Mechanical Engineering (I.RE.M.E.) (Praise worthy prize Publishing house), Vol. 8, no.1, pp. 124-134, SNIP:0.63, , SJR : 0.24, CI : 0.74, Impact Factor : 0.6, H index : 10 (Scopus).
  204. Manikandan M, Arivazhagan N, Nageshwara Rao M, Madhusudhan Reddy G (2015), "Improvement of Microstructure and Mechanical Behavior of Gas Tungsten Arc Weldments of Alloy C-276 by Current Pulsing”, Acta Metallurgica Sinica (English Letters), Vol. 28, Issue 2, pp 208-215, SNIP : 0.803, SJR : 0.397, Impact factor : 0.792, CI : 0.91, H – index : 17, (WOS).
  205. K Jayakrishna, Vimal KEK, & Vinodh S(2015), "ANP based sustainable concept selection”, Journal of Modelling in Management, Vol 10(1), pp 118-136
  206. Mohanraj R, Sakthivel M, Vinodh S, Vimal KEK (2015), "A framework for VSM integrated with Fuzzy QFD”, TQM Journal, Vol 27(5), pp 1-27 SNIP: 0.885 SJR:0.42 Impact factor:0.538 CI: 0.81, H-index: 39 (Scopus)
  207. Mohanraj R, Sakthivel M, Vinodh S, Vimal KEK (2015), "Development of Value Stream Map for an Indian automotive components Manufacturing organization”, Journal of Engineering, Design and Technology Vol 13(3), pp 1-24 SNIP: 0.885 SJR:1.049 Impact factor:0.676 CI:0.64, H-index:9 (Scopus)
  208. Vimal, K. E. K., &Vinodh, S. (2015). "Development of checklist for evaluating sustainability characteristics of manufacturing processes” International Journal of Process Management and benchmarking Vol 3 (2) SNIP: 0.290 SJR: 0.112 Impact factor:0.111 CI:0.11, H-index:4 (Scopus)
  209. Vimal KEK, Vinodh, S., & Raja, A. (2015). Modelling, assessment and deployment of strategies for ensuring sustainable shielded metal arc welding process–a case study. Journal of Cleaner Production, 93, 364-377 SNIP : 2.364 , SJR : 1.588, Impact factor : 4.21, CI : 4.35, H – index : 81. (Scopus) (WOS).
  210. Vimal KEK., Vinodh, S., & Raja, A. (2015). Optimization of process parameters of SMAW process using NN-FGRA from the sustainability view point. Journal of Intelligent Manufacturing, 1-22. SNIP: 1.645, SJR: 1.277, Impact factor: 1.77, CI : 2.03, H – index: 50. (Scopus) (WOS).
  211. Vignesh M, K Venkatesan,R Ramanujam, S.Vijayan (2015), "Tool Wear Analysis of Al 6061 reinforced with 10 wt% Al2O3 Using High Hardened Inserts”, Applied Mechanics and Materials Vol. 787 pp 643-647 SNIP : 0.2, SJR : 0.603, Impact factor : 0.08, CI : 0.09, H Index – 15, (Scopus).
  212. Vignesh M, K Venkatesan, R Ramanujam , P Kuppan (2015) , "A Parametric Optimization on Cutting Force during Laser Assisted Machining of Inconel 718 alloy " , Applied Mechanics and Materials Vol. 787 pp 460-464 SNIP : 0.2, SJR : 0.603, Impact factor : 0.08, CI : 0.09, H Index – 15, (Scopus).
  213. Kumaresan, M, Sathish, S & Karthi, N 2015, ‘Effect of fiber orientation on mechanical properties of sisal fiber reinforced epoxy composites’, Journal of Applied Science and Engineering, vol. 18, pp. 289-294 (Scopus).
  214. Murugesan A, Subramaniam D, Avinash A, N Nedunchezhian (2015) "Quantitative and Qualitative Analysis of Bio Diesel–An In-depth study”, International Journal of Ambient Energy 36 19-30. SNIP: 0.45 SJR: 0.194 Impact factor: 0.5 CI:0.5 (Scopus)
  215. A Murugesan, D Subramaniam, A Avinash, P Sasikumar (2015), "Evaluation of biodiesel properties a statistical approach", Published online: 20 Oct 2015. International Journal of Ambient Energy 35 30-36. SNIP: 0.45 SJR: 0.27 Impact factor: 0.5 CI: 0.93, H-index:15 (Scopus)
  216. Panneerselvam N, Murugesan A, Vijayakumar C, Kumaravel A, Subramaniam D, Avinash A, (2015) "Effects of injection timing on bio-diesel fuelled engine characteristics - An overview”, Renewable and Sustainable Energy Reviews, Volume 50, , Pages 17-31, SNIP: 3.553 SJR: 2.982 Impact Factor: 7.031 CI: 7.03.H-index:121 (Scopus) (WOS) (EBSCO Host).
  217. Murugesan A, Subramaniam D, Avinash A (2015) "Empirical and Statistical analysis of Biodiesel Production by Transesterification process”, Biofuels Vol. 6, Issue 1-2, pp 79-86, SNIP: 0.629 SJR: 0.706 Impact factor: 1.754 CI: 1.88.H-index:20 (Scopus)
  218. Avinash A, S Natarajan, N, Mahalakshmi V, (2015) "Lean homogeneous combustion of e-diesel using external mixture formation technique”, Alexandria Engineering Journal Vol 54, Issue 3, pp 405-413, Vol 54, Issue 3, pp 271-279, SNIP: 0.817 SJR: 0.23 Impact Factor: 0.864, CI :1.02,H-index:7 (Scopus)
  219. Avinash Alagumalai, (2015) "Combustion characteristics of Lemon grass (Cymbopogon flexuosus) oil in a partial premixed charge compression ignition engine”, Alexandria Engineering Journal, Vol 54, Issue 3, pp 405-413, SNIP: 0.817 SJR: 0.23 Impact Factor: 0.864, CI :1.02,H-index:7 (Scopus)

    220. 2014

  220. Saravanakumar R and Selladurai V (2014), "Exergy analysis of a domestic refrigerator using eco-friendly R290/R600a refrigerant mixture as an alternative to HFC134a”, International Journal of Thermal Analysis and Calorimetry (Springer Publications), Vol.115, No. 1, pp. 933-940, SNIP : 1.107, SJR : 0.470, Impact Factor : 2.206, CI : 2.02, H index : 54, (Scopus), (WOS) (EBSCO Host).
  221. Sivakumar M* and Somasundaram P(2014), "Exergy and Energy analysis of Three Stage Auto Refrigerating Cascade System using Zeotropic Mixture for Sustainable Development”, International Journal of Energy Conservation and Management (Elsevier Publications), Vol.84, No. C, pp.589-596. SNIP: 2.508, SJR: 1.801, Impact Factor : 3.590, CI : 4.41, H index : 92, (WOS).
  222. Jagatheeshkumar S, Santhosh G, Nirmalkumar D ,Saravanakumar A, Sasikumar P, Sivasankaran S* (2014), "Mechanical and dry sliding wear behavior of Al 6063/Al2O3/Graphite hybrid composites”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, No. 3, pp. 1222-1228.
  223. Sivakumar M* and Somasundaram P(2014), "Exergy and Performance analysis of Three Stage Auto Refrigerating Cascade (3 stage ARC) System using Environment Friendly Zeotropic Mixture of R290,R170 & R14”, International Journal of Pollution Research (EM International, Pune), Vol. 32, No.4, pp. 943-952, SNIP : 0.193, SJR : 0.144, impact factor : 0.062, CI – 0.04, H - Index : 19 (Scopus).
  224. Jeyasimman D , Sivasankaran S*, Sivaprasad K , Narayanasamy R and Kambali R S(2014), "An investigation of the synthesis, consolidation and mechanical behaviour of Al 6061 nano composites reinforced by TiC via mechanical alloying”, International Journal of Materials & Design(Elsevier Publications), Vol. 57, pp 394-404, SNIP : 3.273, SJR : 2.212, Impact Factor: 3.649, CI : 3.64, H index: 59, (Scopus), (WOS), (EBSCO Host).
  225. Jeyasimman D , Sivaprasad K , Sivasankaran S* and Narayanasamy R (2014), "Fabrication and consolidation behavior of Al 6061 nano composite powders reinforced by multi-walled carbon nanotubes”, International Journal of Powder Technology (Elsevier Publications), Vol. 258, pp 189–197, SNIP: 1.593, SJR: 0.846, Impact Factor: 2.523, CI : 2.66, H index: 85, (Scopus), (WOS), (EBSCO Host).
  226. Sivasankaran S*, Harisagar PT, Saminathan E, Siddharth S, Sasikumar P (2014), "Effect of process parameters in surface roughness during turning of GFRP pipes using PCD insert tool”, Procedia Engineering, Vol. 97 pp. 64-71, SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H – index : 17, (Scopus).
  227. Sivasankaran S*, Saminathan E, Sidharth S, Harisaga PT, Sasikumar P,(2014) "Effect of Graphite Addition on Surface Roughness during Turning of AA 7075-ZrB2 In-situ Metal Matrix Composites”, Procedia Materials Science, Vol. 5, pp. 2122-2131 CI : 0.59.
  228. Sivasankaran S*, Harisagar PT, Saminathan E, Siddharth S, Sasikumar P (2014),” Effect of Nose Radius and Graphite Addition on Turning of AA 7075-ZrB2 in-situ Composites”, Procedia Engineering, Vol. 97, pp. 582-589 SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H – index : 17, (Scopus).
  229. Prasad N, Mukherjee K, Antony S, Manikandan M, Devendranath K Ramkumar, Arivazhagan K (2014), "Investigation on hot corrosion behavior of plasma spray coated nickel based superalloy in aggressive environments at 900°C”, International Journal of ChemTech Research, Vol. 6, Issue – 1, pp. 416 – 431, SNIP : 0.598, SJR : 0.209, Impact factor : 0.515, CI : 0.41, H – index : 17, (Scopus).
  230. Arivarasu M, Manikandan M, Gokulkumar K, Rajkumar V, Devendranath K Ramkumar, Arivazhagan N (2014), "High temperature studies on welded joint in molten salt power plant environments”, International Journal of ChemTech Research, Vol. 6, Issue – 1, pp. 409-415, SNIP : 0.598, SJR : 0.209, Impact factor : 0.515, CI : 0.41, H – index : 17, (Scopus).
  231. Appala Naidu A, Kumaresh Babu SP, Manikandan M, Arivarasu M, Ramkumar R Devendranath, Arivazhagan N (2014), "Hot corrosion studies on welded dissimilar boiler steel in power plant environment under cyclic condition”, International Journal of ChemTech Research, Vol. 6, Issue – 2, pp. 1325-1334, SNIP : 0.598, SJR : 0.209, Impact factor : 0.515, CI : 0.41, H – index : 17, (Scopus).
  232. Manikandan M, Hari PR, Vishnu G, Arivarasu M, Devendranath K Ramkumar, Arivazhagan N, Nageswara Rao M, Reddy GM(2014), "Investigation of Microstructure and Mechanical Properties of Super Alloy C-276 by Continuous Nd: YAG laser Welding”, Procedia Materials Science, Vol. 5, pp. 2233-2241, CI : 0.59.
  233. Manikandan M, Arivazhagan N, Nageswara Rao M , Reddy GM (2014), "Microstructure and mechanical properties of alloy C-276 weldments fabricated by continuous and pulsed current gas tungsten arc welding techniques”, Journal of Manufacturing Processes, Vol. 16, Issue 4, pp. 563–572, SNIP : 1.885, SJR : 1.077, Impact factor : 1.587, CI:1.73, H – index : 20, (Scopus).
  234. Savyasachi Pandit, Vaibhav Joshi, Meghna Agrawal, Manikandan M, Devendranath K Ramkumar, Arivazhagan N, Narayanan S (2014), "Investigations on Mechanical and Metallurgical Properties of Dissimilar Continuous GTA Welds of Monel 400 and C-276”, Procedia Engineering, Vol. 75, pp. 61 - 65, SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H – index : 17, (Scopus).
  235. Arivarasu M, Vishnu G, Hari PR, Vipin VP, Kaushik Katiki, GokulkumarK , Manikandan M, Devendranath K Ramkumar, Arivazhagan N (2014), "Micro-segregation Studies on the Continuous Nd: YAG Laser Beam Welded AISI 316L”, Procedia Engineering, Vol. 97, pp. 892 - 901, SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H – index : 17, (Scopus).
  236. Manikandan M, Nageswara Rao M, Ramanujam R, Devendranath Ramkumar, Arivazhagan N, Reddy GM(2014), "Optimization of the Pulsed Current Gas Tungsten Arc Welding Process Parameters for alloy C-276 using the Taguchi Method”, Procedia Engineering, Vol. 97, pp. 767 - 774, SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H – index : 17, (Scopus).
  237. Chethan Roy, Vipin V Pavanan, Vishnu G, Hari PR, Arivarasu M, Manikandan M, Devendranath Ramkumar, Arivazhagan N (2014), "Characterization of Metallurgical and Mechanical Properties of Commercially Pure Copper and AISI 304 Dissimilar Weldments”, Procedia Materials Science, Vol. 5, pp. 2503 - 2512,
  238. P Avinash, Manikandan M, Arivazhagan N, Devendranath KRamkumar, Narayanan S(2014), "Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys”, Procedia Engineering, Vol. 75, pp. 98 - 102 SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H – index : 17, (Scopus).
  239. Devendranath K Ramkumar, Vaibhav Joshi, Savyasachi Pandit, Meghna Agrawal, Oza Smit Kumar, Saurabh Periwal, Manikandan M, Arivazhagan N (2014), "Investigations on the microstructure and mechanical properties of multi-pass pulsed current gas tungsten arc weldments of Monel 400 and Hastelloy C276”, Materials & Design, Vol. 64, pp. 775 – 782, SNIP : 3.273, SJR : 2.212, Impact Factor: 3.649, CI : 3.64, H index: 59, (Scopus), (WOS), (EBSCO Host).
  240. Kaushik Katiki, Sandeep Yadlapati, Sri Nitin Surya Chidepudi, Hari PR, Manikandan M, Arivarasu M (2014), "Comparative High Temperature Corrosion Studies on Zirconium Dioxide Coated Inconel 625 in Air and Molten Salt Environment”, International Journal of ChemTech Research, Vol. 6, Issue – 11, SNIP : 0.598, SJR : 0.209, Impact factor : 0.515, CI : 0.41, H – index : 17, (Scopus).
  241. Appala Naidu N, Kumaresh Babu A , Manikandan M, Devendranath Ramkumar, K., Arivazhagan (2014), "Air oxidation and molten salt corrosion studies on bimetallic boiler steel at elevated temperatures”, Journal of Corrosion Science and Engineering, Vol. 17, SNIP: 0.286, SJR: 0.186, Impact factor: 0.325, CI : 0.4, H – index: 6, (Scopus).
  242. Kaushik Katiki, Sandeep Yadlapati, Sri Nitin Surya Chidepudi, Manikandan M, Arivarasu M, Devendranath KRamkumar, Arivazhagan N (2014), "Performance of plasma spray coatings on Inconel 625 in Air oxidation and molten salt environment at 800 C”, International Journal of ChemTech Research, Vol. 6, Issue – 5, pp. 2744 – 2749 SNIP : 0.598, SJR : 0.209, Impact factor : 0.515, CI : 0.41, H – index : 17, (Scopus).
  243. Kaushik Katiki, Sandeep Yadlapati, Sri Nitin Surya Chidepudi, Manikandan M, Arivarasu M, Devendranath K Ramkumar, Arivazhagan N ,”Characterization of oxide scales to evaluate hot corrosion behavior of ZrO2 and Al2O3-TiO2 plasma sprayed superalloy (2014)”, International Journal of ChemTech Research, Vol. 6, Issue – 7, pp. 3851 - 3859, SNIP : 0.598, SJR : 0.209, Impact factor : 0.515, CI : 0.41, H – index : 17, (Scopus).
  244. Vimal, KEK, Vinodh, S., &Muralidharan, R. (2014), "An approach for evaluation of process sustainability using multi-grade fuzzy method” International Journal of sustainable engineering Vol 8 (1), PP 40-54 SNIP: 0.42 SJR: 0.322 Impact factor:0.676 CI:0.59, H-index:14 (Scopus)
  245. Vinodh, S., Kumar, S. V., & Vimal KEK (2014). Implementing lean sigma in an Indian rotary switches manufacturing organisation. Production Planning & Control, 25(4), 288-302 SNIP :1.091 , SJR : 0.713 , Impact factor : 0.9, CI : 1.33, H-index:44 (Scopus) (WOS).
  246. Venkatesan K, Ramanujam R, Joel J, Jeyapandiarajan P, Vignesh M, Darsh Jiten Tolia, Venkata Krishna R (2014), "Study of Cutting force and Surface Roughness in machining of Al alloy Hybrid Composite and Optimized using Response Surface Methodology”, Procedia Engineering (Elsevier publications), Vol. 97, pp. 677 – 686, SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H index – 17, (Scopus).
  247. Kumaresan.M, Sathish.S, Karthi.N (2015), "Effect of Fiber Orientation on Mechanical Properties of Sisal Fiber Reinforced Epoxy Composites", Journal of Applied Science and Engineering (Tamkang University Press), vol.18, No.3, pp.289-294,(Scopus).
  248. Sathish S, Ganapathy T, Bhoopathy T (2014), "Experimental Testing on Hybrid Composite Materials", Applied Mechanics and Materials, Vols. 592-594, pp. 339-343, SNIP : 0.2, SJR : 0.603, Impact factor : 0.08, CI : 0.09, H Index – 15, (Scopus).
  249. Sathish S, Kumaresan M, Karthi N , Dhilip Kumar T (2014), "Tensile and impact properties of natural fiber Hybrid composite materials”, International Journal of Modern Engineering research, Vol. 4, Issue : 9, pp. 9 – 12.
  250. Sureshkumar P, Karthick B. Dinakaran S. Rajapradeepan R (2014), "Experimental investigation of mechanical behaviour of glass fibre reinforced with polyurethane resin composite in three different ratios”, IOSR journal of Engineering, Vol. 4, Issue 3, pp. 36 – 41
  251. Avinash A, Natarajan S, (2014) "Computational and statistical analysis of diesel-homogeneous charge compression ignition combustion”, International Journal of Ambient Energy 1-7. SNIP: 0.45 SJR: 0.27 Impact factor: 0.5 CI: 0.93, H-index:15 (Scopus)
  252. Alagumalai Avinash (2014) "Internal Combustion Engines: Progress and Prospects”, Renewable and Sustainable Energy Reviews 38 561-571 SNIP: 3.553 SJR: 2.982 Impact Factor: 7.031 CI: 7.03.H-index:12 1 (Scopus) (WOS) (EBSCO Host).
  253. Avinash A, Subramaniam D, Murugesan A. (2014) "Bio-diesel-A Global Scenario”, Renewable and Sustainable Energy Reviews 29 517-27 SNIP: 3.553 SJR: 2.982 Impact Factor: 7.031 CI: 7.03.H-index:121 (Scopus) (WOS) (EBSCO Host).
  254. Subramaniam D, Murugesan A, Avinash A, V Arivadivan. A (2014), "Characteristic evaluation of alumina–zirconia-coated engine fuelled with punnai methyl ester”, International Journal of Ambient Energy 35 30-36. SNIP: 0.45 SJR: 0.27 Impact factor: 0.5 CI: 0.93, H-index:15 (Scopus)
  255. Nandakumar N, Arularasu M and Vivekanandan R, (2014) "Elimination of Misrun in Aluminium gravity Die-casting by increasing the fluidity of metal flow” International Journal of Applied Engineering Research. vol 9, No.23, , pp. 20663-20672 (scopus)
  256. Nandakumar N, Arularasu M and Vivekanandan R, (2014) "Optimization of cutting parameters in PVD coated Carbide cutting tool by Response Surface Box-Behnken design” International Journal of Applied Engineering Research. vol 9, No.23, pp. 20131-20249. (scopus)
  257. Manvel Raj, Lakshmanan, Narendiranath Babu, (2014) "Comparative Study on Tribological Behavior of Biaxial Glass Fiber/Al2O3/SiC Epoxy Journal Bearing Under Various Test Conditions”, Research Journal of Applied Sciences, Engineering and Technology vol 8(8): Pp 976-988
  258. Ramesh Babu, S, Prabhu Raja, V, Thyla, PR & Thirumalaimuthukumaran, M (2014), ‘Prediction of transient thermo-mechanical behavior of the headstock assembly of a CNC lathe’, International Journal of Advanced Manufacturing Technology, vol. 74, pp. 17-24, SJR: 0.91 , CI: 1.62, H-index:71 Impact factor 1.205, (Scopus).
  259. Prabhu Raja, V, Ramesh Babu, S, Devara Venkata Krishna, Kanchana, J & Thyla, PR (2014), ‘A novel approach for thermal error modeling in CNC turning centre’, International Journal of Mechanical & Mechatronics Engineering, vol. 14, no. 2, pp. 77-84, SJR: 0.14 , CI: 0.25, H-index:7 Impact factor 1.504 (Scopus).
  260. Ramesh Babu, S, Dhamotharan, S (2014), ‘Simulation of Temperature Distributions of CNC Lathe Headstock Assembly’, International Journal of Mechanical & Mechatronics Engineering, vol. 14, no. 6, Impact factor 1.504 , SJR: 0.14 , CI: 0.25, H-index:7 Impact factor 1.504 (Scopus) .
  261. Ramesh Babu, S,PrabhuRaja, V,Kanchana,J & Devara Venkata Krishna (2014), ‘Identification, development and testing of thermal error compensation model for a headstock assembly of CNC turning centre’, International Journal of Engineering and Technology, vol. 3, no. 2, pp. 113-122, , SJR: 0.18 , CI: 0.38, H-index:10 Impact factor 0.8470 (scopus)
  262. Devara Venkata Krishna, Prabhu Raja, V, Kanchana, J & Ramesh Babu, S, (2014), ‘A modeling approach of robust regression for developing thermal error compensation model for CNC Turning centre’, International Journal of Engineering Research & Technology, vol. 3, no. 3, pp. 2331-2336, SJR: 0.18 , CI: 0.38, H-index:10 Impact factor 1.76.
  263. Thamaraikannan B and Thirunavukkarasu V, (2014), "Implementation of Six Sigma Function Deployment in the Design and Manufacturing of Jet Pumps”, International Review of Applied Engineering Research (IRAER), vol. 4, no. 1, pp.73-80.
  264. Prakash T, Sasikumar P, Sivasankaran S* (2014), "Investigations on the Microstructure And Mechanical Property Of Friction Stir Processed AA6061 Aluminium Sheet Metal Reinforced With Al2O3 Surface Composite”, International Journal of Materials Engineering Innovation (Inderscience Publications), Vol.5, No.3, pp. 192-204, SNIP : 0.091, SJR : 0.111, Impact factor : 0.109, CI : 0.14, H index-4 (Scopus).
  265. Saravanakumar A, Sasikumar P, Sivasankaran S (2014), "Synthesis and Mechanical Behavior of AA 6063-x wt. % Al2O3-1% Gr (x = 3, 6, 9 and 12 wt. %) Hybrid Composites”, Procedia Engineering, Vol. 97, pp. 951-960, SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H – index : 17, (Scopus).
  266. Saravanakumar A, Sasikumar P, Sivasankaran S (2014) "Effect of Graphite Particles in Drilling of Hybrid Aluminum Matrix Composite”, Procedia Engineering, Vol. 97, pp. 495-504, SNIP : 0.629, SJR : 0.274, Impact factor : 0.469, CI : 0.49, H – index : 17, (Scopus).

    267. 2013

  267. Arivazhagan N Arivarasu M, Manikandan M, Gokulkumar K , Karthikeyan S , Devendranath Ramkumar K (2013), "Studies on Weldment Corrosion in Different Corrosive Environments”, Journal of Corrosion Science and Engineering, Vol. 16, SNIP: 0.286, SJR: 0.186, Impact factor: 0.325, CI : 0.4, H – index: 6, (Scopus).
  268. Josephine Peter, B. Doloi and B. Bhattacharyya, (2013) Analysis on the Characteristics of Nd: YAG Laser Marking on Alumina Ceramic Based On RSM, "International Journal of Materials and Product Technology”, Vol.46, No.1, , pp.2-18. SJR: 0.17 , CI: 0.36, H-index:23 (Scopus)
  269. Josephine Peter, B. Doloi, B. Bhattacharyya, (2013) "Analysis of Nd: YAG Laser Marking Characteristics on Alumina Ceramics”, The Institution of Engineers (India): Series C: Springer, Vol.94, No 4, pp.287-292.
  270. Subramaniam D, Murugesan A, Avinash A, (2013) , "A comparative estimation of CI engine fuelled with methyl esters of punnai, neem and waste cooking oil” , International Journal of Energy and Environment (IJEE) 4 859-870. SNIP: 0.606 SJR: 0.36 Impact Factor: 1.217, CI: 1.44. (Scopus) (EBSCO Host).
  271. Subramaniam D, Murugesan A, Avinash A. (2013) "Performance and emission evaluation of biodiesel fueled diesel engine abetted with exhaust gas recirculation and Ni coated catalytic converter”, Journal of Renewable and Sustainable Energy 5 (2013) 023138 SNIP: 0.69, SJR: 0.393, Impact Factor: 0.96, CI: 1.01, H-index:13 (Scopus) (WOS) (EBSCO Host).
  272. Murugesan A, Subramaniam D, Avinash A, N Nedunchezhian. (2013) " A comprehensive view on performance, emission, and combustion characteristics of biodiesel-diesel blends at advanced injection timings", Journal of Renewable and Sustainable Energy 5 033103 SNIP: 0.69, SJR: 0.393, Impact Factor: 0.96, CI: 1.01, H-index:13 (Scopus) (WOS) (EBSCO Host).
  273. Subramaniam D, Murugesan A, Avinash A. (2013) "An inclusive view on biodiesel production by heterogeneous catalyst and its engine operational characteristics”, Journal of Renewable and Sustainable Energy 5 033135 SNIP: 0.69, SJR: 0.393, Impact Factor: 0.96, CI: 1.01, H-index:13 (Scopus) (WOS) (EBSCO Host).
  274. Subramaniam D, Murugesan A, Avinash A, Kumaravel A (2013) "Bio-diesel production and its engine characteristics—An expatiate view”, Renewable and Sustainable Energy Reviews 22 361-370 SNIP: 3.553 SJR: 2.982 Impact Factor: 7.031 CI: 7.03.H-index:121 (Scopus) (WOS) (EBSCO Host).
  275. Ramesh Babu, S, Infant Augustine Vivek & Karthik, (2013) ‘Enhancing the Safety of Automobile by using Shape Memory Alloys in Airbags’, International Journal of Information Technology & Computer Perspectives, Special Issue, ISSN (P): 2319-9016
  276. Vimal, K. E. K., & Vinodh, S. (2013), "Application of artificial neural network for fuzzy logic based leanness assessment", Journal of Manufacturing Technology Management Vol 24(2), PP 274-292 SNIP: 1.285 SJR: 0.710 Impact factor:1.293 CI:0.94, H-index:41 (Scopus)
  277. Vinodh S, Devadasan S R, Vimal KEK & Kumar, D. (2013). Design of agile supply chain assessment model and its case study in an Indian automotive components manufacturing organization. Journal of Manufacturing Systems, 32(4), 620-631 SNIP: 2.29, SJR: 2.206, Impact factor: 2.305 , CI : 2.54, H – index :36. (Scopus). (WOS)

    2022

  1. Kalaivani, A., Mohanbabu Bharathi, R. Kannan, G. Senguttuvan, V. Sivakumar, D. Nithiyaprakash, and Donghui Guo. "Preparation of bath temperature controlled NiFeP films for MEMS application." Solid State Communications (2022): 114715. https://doi.org/10.1016/j.ssc.2022.114715.
  2. Shunmuga Priya. R, Priyanka Chaudhary, E. Ranjith Kumar, A. Balamurugan, Ch. Srinivas, G. Prasad, M. Deepty, V. Praveenkumar, B.C. Yadav, D.L. Sastry, Y. Al-Douri, Effect of heat treatment on structural, morphological, dielectric and magnetic properties of Mg–Zn ferrite nanoparticles, Ceramics International, 2022. https://doi.org/10.1016/j.ceramint.2022.02.056.
  3. N. Arunadevi,., M. Swathika, M. Mehala, E. Ranjith Kumar, Tahani M. Bawazeer, Moataz Morad, Kholood Alkhamis, Samar Y. Al-nami, and Nashwa M. El-Metwaly. "New epoxy-Nano metal oxide-based coatings for enhanced corrosion protection." Journal of Molecular Structure 1250 (2022): 131790.
  4. Chaudhary, Priyanka, Arpit Verma, Akash Mishra, Deepankar Yadav, Krishna Pal, B. C. Yadav, E. Ranjith Kumar, Khem B. Thapa, Surabhi Mishra, and D. K. Dwivedi. "Preparation of carbon quantum dots using bike pollutant soot: Evaluation of structural, optical and moisture sensing properties." Physica E: Low-dimensional Systems and Nanostructures (2022): 115174.
  5. S.Ananthi, M. Kavitha, E. Ranjith Kumar, A. Balamurugan, Y. Al-Douri, Hanan K. Alzahrani, Ali A. Keshk, Turki M. Habeebullah, Shams H. Abdel-Hafez, and Nashwa M. El-Metwaly. "Natural tannic acid (green tea) mediated synthesis of ethanol sensor based Fe3O4 nanoparticles: Investigation of structural, morphological, optical properties and colloidal stability for gas sensor application." Sensors and Actuators B: Chemical 352 (2022): 131071.
  6. Munshi, Alaa, T. Prakash, E. Ranjith Kumar, A. Balamurugan, Turki M. Habeebullah, Tahani M. Bawazeer, Shams H. Abdel-Hafez, Nashwa M. El-Metwaly, and T. Indumathi. "Comparative investigation of physicochemical properties of cadmium oxide nanoparticles." Ceramics International 48, no. 3 (2022): 4134-4140.
  7. T.Prakash, E. Ranjith Kumar, M. G. Sumithra, Kholood Alkhamis, Alaa M. Munshi, Gaber AM Mersal, Fathy Shaaban, and Nashwa M. El-Metwaly. "Investigations of Structural, Morphological, Optical and Antimicrobial Behaviour of Bi Doped CdO Nanostructures." Journal of Inorganic and Organometallic Polymers and Materials 32, no. 1 (2022): 280-288.
  8. T.Prakash., E. Ranjith Kumar, G. Neri, Tahani M. Bawazeer, Kholood Alkhamis, Alaa Munshi, Salman S. Alharthi, and Nashwa M. El-Metwaly. "Evaluation of structural, morphological and optical properties of CdO nanostructures." Ceramics International 48, no. 1 (2022): 1223-1229.
  9. R.Balan, V. Gayathri, and R. Priya. 2022. “Anticancer and Antimicrobial Evaluation of Novel Conductive ZnO2 Doped Polymer Patches for Cancer Treatment and Tissue Engineering Applications.” Polymer Bulletin, January (2022).

    10. 2021

  10. Srinivas, Ch, K. Naga Praveen, E. Ranjith Kumar, TV Chandrasekhar Rao, C. L. Prajapat, Sher Singh Meena, Pramod Bhatt, B. Arunkumar, K. C. JamesRaju, and D. L. Sastry. "Shielding performance of MnxNi0. 8–xZn0. 2Fe2O4 (0.1≤ x≤ 0.7) for electromagnetic interference (EMI) in X-band frequency." Ceramics International (2021).
  11. B.Ranjithkumar, E. Ranjith Kumar, H. B. Ramalingam, C. Sharmila Rahale, Mohamed HH Mahmoud, Adel M. Binyaseen, Ali A. Keshk, and Nashwa M. El-Metwaly. "Bio-ingredients assisted synthesis of Fe doped zinc oxide nanostructures: Study on structural, optical, morphological and thermal properties." Ceramics International 47, no. 24 (2021): 35378-35383.
  12. A.Balamurugan, R. Shunmuga Priya, Priyanka Chaudhary, E. Ranjith Kumar, T. Indumathi, Ch Srinivas, B. C. Yadav, and D. L. Sastry. "Natural fuel assisted synthesis of Mg–Cu ferrite nanoparticles: Evaluation of structural, dielectric, magnetic and humidity sensing properties." Ceramics International (2021).
  13. T.Prakash, E. Ranjith Kumar, D. Murugesan, Kholood Alkhamis, Zehba A. Al-Ahmed, Fawaz Saad, Gaber AM Mersal, and Nashwa M. El-Metwaly. "Surfactant effects on structural, optical and morphological characteristics of microwave irradiated CdO nanostructures." Ceramics International 47, no. 19 (2021): 27274-27284.
  14. S.Bhuvaneshwari, S.Satheeskumar, Jeevanantham Velayutham, and Bavaji Syed Rahman. 2021. “HYDROTHERMAL SYNTHESIS and CHARACTERIZATION of ZnO, MgO and ZnO/MgO NANOCOMPOSITES.” Rasayan Journal of Chemistry Vol. 14, No. 3(2021):1581-1586.
  15. P.Vivek, M. Rekha, A. Suvitha, G. Saravana Kumar, Ro. Mu. Jauhar, M. Mahesh, M. Kowsalya, and Ananth Steephen. 2021. “Optical Limiting Behavior, Nonlinear Optical Studies, Geometrical Descriptors, Chemical Properties Data, Topology Analysis on Tetraethylammonium L-Tartarate Dihydrate Crystals.” Molecular Crystals and Liquid Crystals, December, 1–19(2021).
  16. M.Bradha, Nagaraj Balakrishnan, A. Suvitha, T. Arumanayagam, M. Rekha, P. Vivek, P. Ajay, V. Sangeetha, and Ananth Steephen. “Experimental, Computational Analysis of Butein and Lanceoletin for Natural Dye-Sensitized Solar Cells and Stabilizing Efficiency by IoT.” Environment, Development and Sustainability, September (2021).
  17. P.Vivek, M. Rekha, G. Saravana Kumar, Ro. Mu. Jauhar, M. Kowsalya, and Ananth Steephen. “Experimental, Theoretical Investigations on Second Order Nonlinear Optical Solicitations of Anilinium Hydrogen Sulfate (AHS).” Journal of Optics, September (2021).
  18. A.Suvitha, M. A. M. El-Mansy, G. Kothandan, and A. Steephen. “Molecular structure, ft-raman, ir, nlo, nbo, homo–lumo analysis, physicochemical descriptors, adme parameters, and pharmacokinetic bioactivity of 2,3,5,6-tetrachloro-p-benzoquinone.” Journal of Structural Chemistry 62 (9) 2021: 1339–56.
  19. Madhavan, Bradha, Nagaraj Balakrishnan, Branesh Pillai, and Ananth Steephen, “Enhanced Electrical Conductivity of Ceria Electrolyte Doped with Samarium (Ce0.8−XZrxSm0.2O2−δ) for Solid Oxide Fuel Cells.” Journal of Materials Science: Materials in Electronics 32 (18) 2021: 23066–80.
  20. Navamani, K. "Continuum time-delayed electron hopping in the extended dynamical molecules and entropy-ruled Einstein relation for organic semiconductors." Journal of Physics Communications 5, no. 7 (2021): 075012.
  21. Panbude, Anshu, Suhasini Sathiyamoorthy, R. Kumar, H. Shankar, S. Paulraj, V. Kathirvel, A. M. Adam, E. M. M. Ibrahim, K. Jayabal, and Pandiyarasan Veluswamy. "Incorporation of polyaniline on graphene-related materials for wearable thermoelectric applications." Materials Letters 304 (2021): 130576.
  22. Nanthini, S., M. Shalini, Suhasini Sathiyamoorthy, R. Kumar, Hiroya Ikeda, H. Shankar, Malik Maaza, and Pandiyarasan Veluswamy. "Preparation and Characterization of Polyethylenimine Functionalized Reduced Graphene Oxide for Thermoelectric Applications." ECS Journal of Solid State Science and Technology 10, no. 8 (2021): 081014.
  23. R. Balan, V. Gayathri, In-vitro and antibacterial activities of novel POT/TiO2/PCL composites for tissue engineering and biomedical applications, Polymer Bulletin. (2021). https://doi.org/10.1007/s00289-021-03707-9.
  24. A. Kalaivani, B. Mohanbabu, R. Kannan, G. Senguttuvan, V. Sivakumar, Donghui Guo, Influence of current density on the physical properties of electroplated NiFeP nano thin films for MEMS applications. Journal of Materials Science: Materials in Electronics (2021). https://doi.org/10.1007/s10854-021-05939-x.
  25. R. Subramaniyan @ Raja, R. Subash Chandra Bose, A. Arunkumar, G. Vinitha, K. Balasubramanian, "Growth, optical, dielectric and mechanical properties of Benzimidazolium 3,5-dinitrobenzoate single crystals", Journal of Materials Science: Materials in Electronics, 32, 2987-2998 & 2021.
  26. P. Vivek, A. Suvitha, RO. MU. Jauhar, Ananth Steephen, R. Arunkumar, N. Karunagaran, M. Kowsalya, M. Rekha, Determination of SHG deff by Maker fringes studies on unidirectional grown guanidinium chlorochromate single crystal for NLO device applications, Journal of Optics, 50(1), 77-82, 2021.
  27. R. Vandamar Poonguzhali, E. Ranjith Kumar, T. Pushpagiri, Ananth Steephen, N. Arunadevi, S. Baskoutas, Lemon juice (natural fuel) assisted synthesis of MgO nanorods for LPG gas sensor applications, Solid State Communications (2021) 325, 114161 ( 2020).
  28. P. Vivek, M. Rekha, Ananth Steephen, RO. MU. Jauhar. G. Saravana Kumar, A. Suvitha, N. Karunagaran, M. Kowsalya, Nonlinear optical crystalline nature bis (2,6-diaminopyridinium) hydrogen phthalate nitrate monohydrate (APPN): Development and its phase matching nature, Results in Optics, 3, 100075, 2021.
  29. P. Vivek, A. Suvitha, RO. MU. Jauhar, Ananth Steephen, R. Arunkumar, N. Karunagaran, M. Kowsalya & M. Rekha, Determination of SHG deff by Maker fringes studies on unidirectional grown guanidinium chlorochromate single crystal for NLO device applications, Journal of Optics 50, 77–82 (2021).
  30. Athisaya Rajah Suvitha, Nookala Yuvaraj Maharani, Hrishikesh Kayarthaya Karikkad, Karatholuvu Chandrasekar Varun, Ananth Steephen, Quantitative Experimental and Theoretical Research using the DFT Technique on the Structural, UV, Electronic, and FMO Properties of Gammaxene, Biointerface research in applied chemistry, 11(6), 14240 - 14250,2021.
  31. R. Shenoy, Sakunthala Ayyasamy, Vidhya Bhojan, Rajesh Swaminathan, Nandhakumar Raju, P. Senthil Kumar, M. Sasikumar, Govindan Kadarkarai, Saravanakumar Tamilarasan, Selvaraju Thangavelu, J. Suryakanth, M. V. Reddy, Visible light sensitive hexagonal boron nitride (hBN) decorated Fe2O3 photocatalyst for the degradation of methylene blue, Journal of Materials Science:Materials in Electronics(2021) (Accepted).
  32. P. Vivek, G. Saravana Kumar, Ananth Steephen, RO. MU. Jauhar, A. Suvitha, M. Rekha, M. Kowsalya, N. Karunagaran & R. Arunkumar , Development of organic crystalline nature guanidinium nitrate (GuN): structural, frontier molecular orbital, optical, thermal, mechanical, theoretical and experimental SHG and Z-scan properties for NLO device uses, Journal of Materials Science: Materials in Electronics (2021) (Accepted).
  33. A. Arunkumar, A.Rathika, R. Subramaniyan @ Raja, R. Subash Chandra Bose, K.Balasubramanian, Studies on 4-dimethylaminopyridinium salicylate monohydrate’s optical, mechanical and laser damage threshold, Solid State Communications (Accepted).
  34. P Chitra, E. Ranjith Kumar, T. Pushpagiri, Ananth Steephen, Size and Phase Purity–Dependent Microstructural and Magnetic Properties of Spinel Ferrite Nanoparticles, Journal of Superconductivity and Novel Magnetism, 10.1007/s10948-021-05831-z.

    35. 2020 - 2014

  35. R. Durgadevi, Ananth Steephen, T. Arumanayagam, Growth, thermal, linear and nonlinear optical properties of a novel second-order nonlinear optical crystal: urotropine p-nitrophenol, Journal of Materials Science: Materials in Electronics, 31, pages18683–18691(2020).
  36. Manjula R. Shenoy, Sakunthala Ayyasamy, Mogalahalli VenkateshReddy Venkatashamy Reddy, Govindan Kadarkarai, J Suryakanth, Saravanakumar Tamilarasan, Selvaraju Thangavelu & Arout Chelvane Jeyaramane, The effect of morphology-dependent surface charges of iron oxide on the visible light photocatalytic degradation of methylene blue dye, Journal of Materials Science: Materials in Electronics, 31, 17703–17717(2020).
  37. M. Rekha, M. Kowsalya, S. Ananth, P. Vivek, RO. MU. Jauhar, Current – voltage characteristics of new organic natural dye extracted from Terminalia chebula for dye sensitized solar cell applications, Journal of Optics 48 (1) 104 – 112, (2019).
  38. P. Vivek, RO. MU. Jauhar, A. Suvitha, Paavai Era, S. Ananth, P. Murugakoothan, Habitual growth and its influence on the properties of anilinium perchlorate single crystal for nonlinear optical device applications, Journal of Materials Science: Materials in Electronics, 29(7), 5718–5725, (2018).
  39. R. Arunkumar, D. Benny Anburaj, P. Vivek, RO. MU. Jauhar, R. K. Balachandar, S. Ananth, P. Murugakoothan, Synthesis, growth, frontier molecular orbitals, fracture mechanics and nonlinear optical studies of L-serine methyl ester hydrochloride single crystal, Journal of Optics 47 (3) 374 – 379, (2018).
  40. K. Gnanamoorthi, M. Balakrishnan, E. Ranjith Kumar, T. Prakash, R. Mariappan, Structural, Optical and Gas Sensing Performance of Pure and Doped ZrO2, Journal of Advanced Physics, 6(4), 508-513, (2017).
  41. S. Ananth, T. Arumanayagam, P. Vivek and P. Murugakoothan, Enhanced photovoltaic behavior of dye sensitized solar cells fabricated using pre dye treated titanium dioxide nanoparticles. Journal of Materials Science: Materials in Electronics 27(1) 146 – 153, (2016).
  42. T. Prakash, A. Bonavita, G. Neri, E. Ranjith Kumar, Microwave-assisted synthesis of Cd (OH) 2/CdO nanorods: effect of irradiation time, Superlattices and Microstructures, 90, 117-123, (2016).
  43. R. Mariappan, V. Ponnuswamy, P. Suresh, R. Suresh, M. Ragavendar, Nanostructured GdxZn1− xO thin films by nebulizer spray pyrolysis technique: Role of doping concentration on the structural and optical properties, Superlattices and Microstructures, 59, 47-59, (2013).
  44. R. Mariappan, V. Ponnuswamy, M. Ragavendar, Effect of ammonia solution on proparties of sprayed ZnO thin films consisting of Nano – Pyramids, Metals and Material Internation, 19,.983-990, (2013).
  45. R. Mariappan, V. Ponnuswamy, M. Ragavendar, Influence of molar concentration on the physical properties of nebulizer-sprayed ZnO thin films for ammonia gas sensor, Materials science in semiconductor processing, 16,1328-1335, (2013).
  46. R. Mariappan, V. Ponnuswamy, A. Chandra Bose, R. Suresh, M Ragavendar, Influence of Y doping concentration on the properties of nanostructured MxZn1− xO (M= Y) thin film deposited by nebulizer spray pyrolysis technique, Journal of Physics and Chemistry of Solids, 75, 1033-1040 (2014).
  47. R. Mariappan, V. Ponnuswamy, A. Chandra Bose, A. Chithambararaj, R. Suresh, M. Ragavendar, Structural, optical and electrical characterization of nebulizer-sprayed ZnO nano-rods, Superlattices and Microstructures, (2014).
  48. R. Mariappan, V. Ponnuswamy, P. Suresh, R. Suresh, M. Ragavendar, A. Chandra Bose, Nanostructured CexZn1− xO thin films: Influence of Ce doping on the structural, optical and electrical properties, Journal of alloys and compounds, 588, 170-176(2014).
  49. R. Mariappan, V. Ponnuswamy, R. Suresh, P. Suresh, A. Chandra Bose, M. Ragavendar, Role of substrate temperature on the properties of Na-doped ZnO thin film nanorods and performance of ammonia gas sensors using nebulizer spray pyrolysis technique, Journal of alloys and compounds, 582, 387-391(2014).

    2022

  1. Mahalakshmi, R., R. Saravanan, P. Selvakumar, M. S. Karthikeyan, and L. Ravikumar. "Polymeric Substitution of Triazole Moieties in Cellulosic Schiff Base for Heavy Metal Complexation Studies." Journal of Polymers and the Environment 30, no. 1 (2022): 360-372
  2. R.Mahalakshmi, R. Saravanan., P.Selvakumar P., M.S. Karthikeyan., L.Ravikumar. Polymeric Substitution of Triazole Moieties in Cellulosic Schiff Base for Heavy Metal Complexation Studies, J Polym Environ, 30, (2022):360–372.

    3. 2021

  3. R.Senjudarvannan, A.Revathi, R.Priyadharsini., N.P.Sasikumar, K.Banupriya, D.Sudha, Analysing the nature of plasma and blood flow using exact roving wave solutions of fifth order rove-time equation, IOP Conference Series: Materials Science and Engineering, 1145,1 (2021):012065.
  4. T. Kalaivani, P. Anil Kumar, Samridhi , K. Balachandran ,Synthesis of Ag Decorated TiO2 Nanoparticles for Ammonia Gas Sensor Application, Journal of Environmental Research Nanotechnology,10, ( 2021):25-34.
  5. T.Sathyapriya Manikandan Dhayalan, R.Jagadeeswari,Rathika Govindasamy, S. U Mohammed Riyaz, Moonis Ali Khan, Mika Sillanpää ,Assessing bioorganic gum performance as a corrosion inhibitor in phosphoric acid medium: Electrochemical and computational analysis, Materials and Corrosion, (2021):1-13.
  6. D.Sudha, Sundararajan Vairam, Subbarayan. Sarathbabu, Nachimuthu Senthil Kumar, Ramasamy Sivasamy & Suyambulingam Jone Kirubavathy, 2-Methylimidazolium pyridine-2,5-dicarboxylato zinc(II) dihydrate: Synthesis, characterization, DNA interaction, anti-microbial, anti-oxidant and antibreast cancer studies, Journal of Coordination Chemistry ,74,16(2021): 2701-2719.
  7. R. Jagadeeswari, P. Selvakumar, V. Jeevanantham, R. Saravanan, Chemically Modified Cellulose Capped Zinc Oxide Nanocomposite: Spectral and Optical Properties, Arch. Metall. Mater., 66, 3 (2021):911-915.
  8. E. H. Pricilla Bai, S. Vairam, Co-ordination behaviour of hydrazine and isomers of acetoxy benzoic acids with transition metal ions, Bull. Chem. Soc. Ethiop, 35,2, (2021): 337-350.

    9. 2020

  9. K.V. Satheesh Kumar, P. Selvakumar, R. Jagadeeswari, M. Dharmaraj, K.R. Uvanshankar,B. Yogeswaran, Stress analysis of riveted and bolted joints using analytical and experimental approach, Materials today proceedings, 42(2021) :1091-1099
  10. K. Banupriya, A. Revathi, D. Sudha, S. Jone kirubavathy, R. Umarani, Tetrapropylammonium Tribromocupurate Complex[(C3H7)4N]CuBr3(II) - Synthesis, Thermal and Spectral Characterization, Materials today proceedings (2020) : 1-9
  11. Saravanan R., Mahalakshmi R., Karthikeyan M.S., Ravikumar L., Chelating modified cellulose bearing pendant heterocyclic moiety for effective removal of heavy metals,Water Science and Technology, 80, No.8(2020):20
  12. A.Revathi, A.Geetha, D.Sudha, The Water Quality Parameters Of Some Bore Wells In Edappadi Taluk, Salem District, Tamilnadu", Gedrag & Organisatie Review, 33, No.02(2020):1559-1570
  13. V. Senthil Kumar, A. Revathi, R.Priyadharsini, N. P. Sasikumar, R. Senjudarvannan, D. Sudha, Predictions On Mortality Rate Of Covid-19 At Global Level: A Statistical Modeling, International Journal of Interdisciplinary Global Studies, 14, No: 04,(2020) :130-134
  14. R Senjudarvannan, D Sudha, N P Sasikumar,R Priyadharsini,Exact nature of Frenkel – Kontorova dislocations in (2+1) dimensional crystals, Journal of Physics: Conference Series, 1706, 1-6
  15. K. T. Priya Vadhana, S. Vairam, B. Ushadevi, S. Parveen, New Mg(II) and Ca(II) Mixed Strontium Squarates: Structural Characterization, DNA/BSA Interaction, Antioxidant and Anticancer Activities, Journal of Cluster Science (2020)
  16. Daneshwaran Balaji, Triveni Rajashekhar Mandlimath, Jie Chen, Yoshitaka Matsushita, Sathasivam Pratheep Kumar, Langbeinite Phosphates KPbM2(PO4)3 (M = Cr, Fe): Synthesis, Structure, Thermal Expansion, and Magnetic Properties Investigation, Inorg. Chem., 59(2020):13245−13253
  17. Daneshwaran Balaji, Triveni Rajashekhar Mandlimath, Pratheep KumarInfluence of tin substitution on negative thermal expansion of K2Zr2-xSnxP2SiO12 (x = 0 - 2) phosphosilicates ceramics, Ceramics International,46(2020)
  18. NiroshaBose, VairamSundararajan, T.Prasankumar, Sujin, P.Josec, α – MnO2 coated anion intercalated carbon nanowires: A high rate capability electrode material for supercapacitors, Materials letters, 278(2020)

    19. 2011 to 2019

  19. T. Kalaivani, P. Anil Kumar, Synthesis of TiO2:Ce nanoparticles for development of ammonia gas sensors,Journal of Materials Science: Materials in Electronics, 29, No.12(2018)
  20. T. Kalaivani, P. AnilKumar, Role of Temperature on the Phase Modification of TiO2 Nanoparticles Synthesized by the Precipitation Method,Silicon, 10 (2018):1679–1686
  21. Maria Joseph Vinolia Thamilarasi, Premkumar Anilkumar, Chinniagounder Theivarasu, Molagoundanpalayam Venkatachalam Sureshkumar, Removal of vanadium from wastewater using surface-modified lignocellulosic material, Environmental Science and Pollution Research,25,No.26 (2018):26182-26191.
  22. T. K. M. Prashanth Kumar, Triveni R. Mandlimath, P. Sangeetha, S. K. Revathi,S. K. Ashok Kumar, Nanoscale materials as sorbents for nitrate and phosphate removal from water,.,Environ. Chem. Lett., 16,No.2(2018): 389-400.
  23. Bose Nirosha, Rajendran Selvakumar, Jeyadharmarajan Jeyanthib and Sundararajan Vairam Elaeocarpus tectorius derived phosphorus-doped carbon as an electrode material for an asymmetric supercapacitor,New journal of chemistry,44(2018):181-193
  24. R. Saravanan, L. Ravikumar, Renewable modified cellulose bearing chelating Schiff base for adsorptive removal of heavy metal ions and antibacterial action,Water Environment Research,89(017):626-640
  25. R. Saravanan, L. Ravikumar, Adsorption Equilibrium and Kinetic studies on Effective removal of Heavy metals onto Modified Cellulose Bearing Schiff base with Pyridine chelating groups from Aqueous Solution,International Journals of Materials and Product Technology, 55, No.1(2017):188-209
  26. Saravanan R and Ravikumar L, Cellulose bearing schiff base and carboxylic acid chelating groups a low cost and green adsorbent for heavy metal ion removal from aqueous solution,Water science and Technology,. 7 (2016):530-545
  27. Saravanan R and Ravikumar L, The Use of New Chemically Modified Cellulose for Heavy Metal Ion Adsorption and Antimicrobial Activities,Journal of Water Resource and Protection, 7(2015):530-545
  28. D.Sudha, A.Ramasubbu, Synthesis and Characterization of Zn-Al, Mg-Al Layered Double Hydroxides Intercalated Polymer Nanocomposites, Asian Journal of Chemistry, 25, S(2013): S120-S124
  29. Thamilarasi M.J.V., Anilkumar P., Theivarasu C., Sureshkumar M.V.,Development of Control Release Phosphatic Fertiliser From Palm Fruit Husk,Journal of Environmental sciences,Vol 1(2011):335-339

    2021

  1. Boutiara, Abdelatif, Sina Etemad, Jehad Alzabut, Azhar Hussain, Muthaiah Subramanian, and Shahram Rezapour. "On a nonlinear sequential four-point fractional q-difference equation involving q-integral operators in boundary conditions along with stability criteria." Advances in Difference Equations 2021, no. 1 (2021): 1-23.
  2. Muthaiah, Subramanian, Dumitru Baleanu, Akbar Zada, Thangaraj Nandha Gopal, and Shanmugam Muthukumar. "Existence results for the Hadamard fractional diσerential equations and inclusions." In Journal of Physics: Conference Series, vol. 1850, no. 1, p. 012122. IOP Publishing, 2021.
  3. Muthaiah, Subramanian, Dumitru Baleanu, Manigandan Murugesan, and Duraisamy Palanisamy. "Existence of solutions for the Caputo-Hadamard fractional diσerential equations and inclusions." In Journal of Physics: Conference Series, vol. 1850, no. 1, p. 012107. IOP Publishing, 2021.
  4. Muthaiah Subramanian, and Thangaraj Nandha Gopal. "Analysis of boundary value problem with multi-point conditions involving Caputo-Hadamard fractional derivative." Proyecciones (Antofagasta) 39, no. 6 (2020): 1555-1575.
  5. Shahzad, Faisal, Wasim Jamshed, Suriya Uma Devi Sathyanarayanan, Abederrahmane Aissa, Prakash Madheshwaran, and Abed Mourad. "Thermal analysis on Darcy‐Forchheimer swirling Casson hybrid nanofluid flow inside parallel plates in parabolic trough solar collector: An application to solar aircraft." International Journal of Energy Research 45, no. 15 (2021): 20812-20834.
  6. Jamshed, Wasim, S. R. Mishra, P. K. Pattnaik, Kottakkaran Sooppy Nisar, S. Suriya Uma Devi, M. Prakash, Faisal Shahzad, Majid Hussain, and V. Vijayakumar. "Features of entropy optimization on viscous second grade nanofluid streamed with thermal radiation: A Tiwari and Das model." Case Studies in Thermal Engineering 27 (2021): 101291.
  7. Ali, Bagh, Suriya Uma Devi Sathyanarayanan, Ahmed Kadhim Hussein, Sajjad Hussain, and Rizwan Ali Naqvi. "Transient rotating nanofluid flow over a Riga plate with gyrotactic micro-organisms, binary chemical reaction and non-Fourier heat flux." Chinese Journal of Physics 73 (2021): 732-745.
  8. Sathyanarayanan, Suriya Uma Devi, Fazle Mabood, Wasim Jamshed, S. R. Mishra, Kottakkaran Nisar, P. K. Pattnaik, M. Prakash, Abdel-Haleem Abdel-Aty, and Mohammed Zakarya. "Irreversibility process characteristics of variant viscosity and conductivity on hybrid nanofluid flow through Poiseuille microchannel: A special case study." Case Studies in Thermal Engineering 27 (2021): 101337.
  9. Hiba, Brahimi, Fares Redouane, Wasim Jamshed, C. Ahamed Saleel, S. Suriya Uma Devi, M. Prakash, Kottakkaran Sooppy Nisar, V. Vijayakumar, and Mohamed R. Eid. "A novel case study of thermal and streamline analysis in a grooved enclosure filled with (Ag–MgO/Water) hybrid nanofluid: Galerkin FEM." Case Studies in Thermal Engineering 28 (2021): 101372.
  10. Soumitra, Das. "On a question concerning D4-modules." Вестник Санкт-Петербургского университета. Математика. Механика. Астрономия 8, no. 3 (2021): 467-474.
  11. Das, Soumitra, and Ardeline M. Buhphang. "On principally small-injective rings." Rendiconti del Circolo Matematico di Palermo Series 2 (2021): 1-15.
  12. Baleanu, Dumitru, S. Hemalatha, P. Duraisamy, P. Pandiyan, and Subramanian Muthaiah. "Existence results for coupled differential equations of non-integer order with Riemann-Liouville, Erdélyi-Kober integral conditions." AIMS Mathematics 6, no. 12 (2021): 13004-13023.
  13. Karthikeyan, K., D. Tamizharasan, J. J. Nieto, and Kottakkaran Sooppy Nisar. "Controllability of second-order differential equations with state-dependent delay." IMA Journal of Mathematical Control and Information 38, no. 4 (2021): 1072-1083.
  14. Karthikeyan, Kulandhaivel, Panjaiyan Karthikeyan, Nichaphat Patanarapeelert, and Thanin Sitthiwirattham. "Mild Solutions for Impulsive Integro-Differential Equations Involving Hilfer Fractional Derivative with almost Sectorial Operators." Axioms 10, no. 4 (2021): 313.
  15. Karthikeyan, Kulandhaivel, Panjaiyan Karthikeyan, Dimplekumar N. Chalishajar, Duraisamy Senthil Raja, and Ponnusamy Sundararajan. "Analysis on ψ-Hilfer fractional impulsive differential equations." Symmetry 13, no. 10 (2021): 1895.
  16. Karthikeyan, Kulandhivel, Dhatchinamoorthy Tamizharasan, and Dimplekumar N. Chalishajar. "Analysis on Controllability Results for Wellposedness of Impulsive Functional Abstract Second-Order Differential Equation with State-Dependent Delay." Axioms 10, no. 3 (2021): 188.
  17. Tamizharasan, D., and K. Karthikeyan. "Controllability of nonlocal impulsive differential equations with measure of noncompactness." In Journal of Physics: Conference Series, vol. 1850, no. 1, p. 012109. IOP Publishing, 2021.
  18. Tamizharasan, D., and K. Karthikeyan. "Controllability results for fractional integrodifferential systems with boundary conditions." Indian Journal of Pure and Applied Mathematics 52, no. 1 (2021): 39-45.
  19. Karthikeyan, Kulandhivel, D. Senthil Raja, and P. Sundararajan. "A study of solutions of abstract fractional integro differential equations." Nonlinear Studies 28, no. 2 (2021).
  20. Karthikeyan, Kulandhivel, Panjaiyan Karthikeyan, Haci Mehmet Baskonus, Kuppusamy Venkatachalam, and Yu‐Ming Chu. "Almost sectorial operators on Ψ‐Hilfer derivative fractional impulsive integro‐differential equations." Mathematical Methods in the Applied Sciences (2021).
  21. Redouane, Fares, Wasim Jamshed, S. Suriya Uma Devi, M. Prakash, Kottakkaran Sooppy Nisar, Nor Ain Azeany Mohd Nasir, M. Motawi Khashan, I. S. Yahia, and Mohamed R. Eid. "Galerkin finite element study for mixed convection (TiO2–SiO2/water) hybrid-nanofluidic flow in a triangular aperture heated beneath." Scientific reports 11, no. 1 (2021): 1-15.
  22. Mabood, F., S. Suriya Uma Devi, W. A. Khan, M. Prakash, and Wasim Jamshed. "Irreversibility intent triple diffusion stream over porous medium plate with radiation and joule heating." Chemical Engineering Communications (2021): 1-17.
  23. P, Arulpandy, and Trinita Pricilla M. "Bipolar Neutrosophic Soft Generalized Pre-Continuous Mappings". International Journal Of Neutrosophic Science, 2021, 101-110. doi:10.54216/ijns.160205.
  24. Tamizharasan, D., and K. Karthikeyan. "Controllability results for fractional integrodifferential systems with boundary conditions." Indian Journal of Pure and Applied Mathematics 52, no. 1 (2021): 39-45.
  25. Ali, Bagh, Suriya Uma Devi Sathyanarayanan, Ahmed Kadhim Hussein, Sajjad Hussain, and Rizwan Ali Naqvi. "Transient rotating nanofluid flow over a Riga plate with gyrotactic micro-organisms, binary chemical reaction and non-Fourier heat flux." Chinese Journal of Physics 73 (2021): 732-745.
  26. Shahzad, Faisal, Wasim Jamshed, Suriya Uma Devi Sathyanarayanan, Abederrahmane Aissa, Prakash Madheshwaran, and Abed Mourad. "Thermal analysis on Darcy‐Forchheimer swirling Casson hybrid nanofluid flow inside parallel plates in parabolic trough solar collector: An application to solar aircraft." International Journal of Energy Research (2021).
  27. Boutiara, Abdelatif, Sina Etemad, Jehad Alzabut, Azhar Hussain, Muthaiah Subramanian, and Shahram Rezapour. "On a nonlinear sequential four-point fractional q-difference equation involving q-integral operators in boundary conditions along with stability criteria." Advances in Difference Equations 2021, no. 1 (2021): 1-23.
  28. Tamizharasan, D., and K. Karthikeyan. "Controllability of nonlocal impulsive differential equations with measure of noncompactness." In Journal of Physics: Conference Series, vol. 1850, no. 1, p. 012109. IOP Publishing, 2021.

    29. 2020

  29. Damodharan, K., and Vigneshwaran, M., δ⋇gα - Closed sets in Topological Spaces, Advances in Mathematics: Scientific Journal, 9(3) (2020), pp.807-817.
  30. Damodharan, K., and Vigneshwaran, M., Nδ⋇gα -Closed sets in Neutrosophic Topological Spaces, Advances in Mathematics: Scientific Journal, 9(3)(2020), pp.819-829.
  31. Damodharan, K., and Vigneshwaran, M., Nδ⋇gα - Continuous and irresolute functions in Neutrosophic Topological Spaces, Neutrosophic Sets and Systems, 38(2020), pp.439-452.
  32. Damodharan, K., and Vigneshwaran, M., Nδ - Continuity in Neutrosophic Topological Spaces, Poincare Journal of Analysis & Applications, 8, 1(1), (2020), pp.139-146.
  33. Karthikeyan, S., and Mary, U., On b-coloring and Johan coloring of line graphs, AIP Conference Proceedings, 2261, (2020), pp.030007.
  34. Senthil Raja, D., Sundararajan, P., and Karthikeyan, K., Controllability problem for fractional impulsive integrodifferential evolution systems of mixed type with the measure of noncompactness, Results in Nonlinear Analysis, 3(2), (2020), pp.85-99.
  35. Aravindh, D., Sakthivel, R., Fanchao Kong and Marshal Anthoni, S., Finite-time reliable stabilization of uncertain semi-Markovian jump systems with input saturation, Applied Mathematics and Computations, 384, (2020) pp.125388.
  36. Saravanan, S., and Raja, N., Coupled radiative and convective heat transfer in enclosures: Effect of inner heater – enclosure wall emissivity contrast, Physics of Fluids, 32, (2020) pp.093606.
  37. Kavitha, M., and Guruprasanth, S., Imaginations and Intelligence in Regression, International Journal of Creative Research Thoughts, Volume 8, Issue 2, Feb(2020), 240-242.
  38. Kavitha, M., Strong Independent Functions, International Journal of Mathematics Trends and Technology, Volume 66, Issue 3, No. 1, March (2020), 5-11.
  39. Kavitha, M., Improved Indicators of Analytic Function, International Journal of Innovative Science, Engineering & Technology, Volum 7, Issue 3,March (2020), 127-130.
  40. Kavitha, M., Basic Maximal Total Strong Dominating Functions, International Journal of Trend in Scientific Research and Development, Volume 4, Issue 4, June (2020), 71-83.
  41. Kavitha, M., Maximal Strong Independent Functions, International Journal of Innovative Science, Engineering and Technology, Volume 7, Issue 7, July(2020), 1-7.
  42. Hema, P., Selvarani, N., Geetha, P., Karthikeyan, P., and Gowtham Kumar, S., Fuzzy Graph Theory in Coloring Graph, Materials Today: Proceedings, March 2021.

    43. 2019 - 2017

  43. Damodharan, K., and Vigneshwaran, M., δ⋇gα - Continuous functions in Topological Spaces, American International Journal of Research in Science, Technology, Engineering and Mathematics, special issue, (2019), pp.352-359.
  44. Damodharan, K., and Vigneshwaran, M., On δ⋇gα - Multifunctions in Topological Spaces, International journal of scientific and technology Research, 8(8), (2019), pp.715-721.
  45. Aravindh, D., Sakthivel, R., Kaviarasan, B., Marshal Anthoni, S., and Faris Alzahrani, Design of observer-based non-fragile load frequency control for power systems with electric vehicles, ISA Transactions, 91, (2019) pp.21-31.
  46. Vijayalakshmi, M., and Sridevi, B., A Generalized Transformation Function That Transforms Multiplicative Preference Relations into Fuzzy Preference Relations in MPDM, Applied Mathematics and Information Sciences, vol. 13, S1, (2019) 267-273.
  47. Meena, S., and Panayappan, S., Dynamical system induced by composition operators in spaces of analytic functions, J. Global Research Math. Archv., 5, (2018) pp.51-57.
  48. Aravindh, D., Sakthivel, R., and Marshal Anthoni, S., Extended dissipativity-based non-fragile control for multi-area power systems with actuator fault, International Journal of Systems Science, 50, (2018) pp.256-272.
  49. Meena, S., and Panayappan, S., The class of absolute square k-paranormal operator, Global J. Pure Appl. Math. 13, (2017) pp.7993-8002.

    2021

  1. Jayasudha, T., Ms K. Poomalar, N. Venugopal, and S. Senthilkumar. "The Significance of Format in English Vocabulary Test Performance: A Study on the EFL Learners of Government versus Private Schools in India." Annals of the Romanian Society for Cell Biology (2021): 17726-17739.
  2. Ramya, S., and S. Brindha. "Unlocking the fetters of Anguish: An Existential Approach towards Shashi Deshpande’s The Dark Holds No Terrors." Annals of the Romanian Society for Cell Biology (2021): 17714-17720.
  3. Brindha, S., and S. Ramya. "A glimpse at the flourished Downtrodden: with reference to Urmilla Pawar’s The Fourth Wall." Annals of the Romanian Society for Cell Biology (2021): 17621-17626.
  4. Brindha, S., and S. Ramya. "An Echo of Cultural Embellishments of Dalits: with reference to Imayam’s Beasts of Burden." Annals of the Romanian Society for Cell Biology (2021): 17669-17675.
  5. Jayasudha, T., M. Hema, Ms M. Pramila, and Mr M. Arjunan. "Language Acquisition Via Facets of Literature." NVEO-NATURAL VOLATILES & ESSENTIAL OILS Journal| NVEO (2021): 6878-6882.
  6. Brindha, S., M. Angeline, K. Nagarathinam, M. Kalaiarasan, T. Sathyaseelan, and S. S. Soundarya. "Untangling the convolutions of Violence in Kyung–sook Shin’s I’ll Be Right There." NVEO-NATURAL VOLATILES & ESSENTIAL OILS Journal| NVEO (2021): 6883-6888.
  7. Sharmila K., Dr.S. Padma Priya ., Ms. Hamsalatha M. “An Exploration Of Partition In Amrita Pritam’s Novel Pinjar – An Agony.” Annals of the Romanian Society for Cell Biology (2021) 17710–17713.
  8. Sharmila K., “Professional Writing Strategies- A Critical Analysis” Bodhi International Journal of Research in Humanities, Arts and Science (2021). E-ISSN: 2456-5571

    9. Book Chapters

  9. Sathya, T., and Hema, M. “Multiple Intelligence Activities to Enhance the Listening and Speaking Skill of Rural Women Learners – An Experimental Study. Book chapter.” In Research Trends in Multidisciplinary Subjects. 2021.
  10. Brindha. S., and Sathyaseelan, T. “Untangling the Convolutions of Violence in Kyung – Sook Shin’s I’ll Be Right There. Book chapter.” In Research Trends in Multidisciplinary Subjects. 2021.
  11. Sharmila, K., and Vigneshwaran, C. “Gendethimma – A Symbol of Traditional Crime. Book chapter.” In Research Trends in Multidisciplinary Subjects. 2021.
  12. Vidhiya, R. “Traces of Scrupulosity in the Character Alan Strang – A Psychological Study on the Theological Obsession in Peter Shaffer’s Equus. Book chapter.” In Research Trends in Multidisciplinary Subjects. 2021.

    13. 2020

  13. Hema, M., and Jayasudha.T., Aspects of Postcolonialism and portrayal of resilience of the marginalized in Aravind Adiga’s novel The White Tiger, Journal of Critical review. 17, (2020) pp.1634-1637.
  14. Jayasudha.T., and Hema, M., Exploration of Inner self In Manjukapur’s Novel Custody, Journal of Critical review. 17, (2020) pp.1638-1641.
  15. Ramya.S., Brindha.S., Charly Jerome. J., and Sathishkumar.P., Deciphering the domestic labyrinth of Existential Women, International Journal of Psychosocial Rehabilitation. 24. (2020) pp. 4556-4562.
  16. Sharmila K., Selvi Chandraghantham S., and Shiny Esther N., Portrayal of chronicle in Girish Karnad's The dream's of Tipu Sultan, International Journal of Psychosocial Rehabilitation. 24. (2020) pp. 4563-4572.
  17. Charly Jerome.J., Geetha.P., and Vijayalakshmi.R., The Palace of Illusions – A Feministic Purview, International Journal of Psychosocial Rehabilitation.5. (2020) pp.8902-8905
  18. Aarthi.M., Dhilshath Banu.M., and Santhi.S., Language Acquisition through Social Media, International Journal of Psychosocial Rehabilitation. 5. (2020) pp.8692-8697
Virtual Campus Tour
Virtual Campus Tour - Speak with Student Advisors
Book today for a virtual tour of KPRIET

Find out more